Author Archives: Eric

05May 2022

How to install Kia Soul radio with Carplay Android Auto in your car?

⋅ Leave a Comment

If your Kia soul radio has failed, has no sound, the volume doesn’t work, or won’t power on, you can replace it with a new radio that has high-end equipment inside. In fact, it won’t take you much time to install a Kia Soul radio at all. The length of the procedure can depend on the skills that you have towards installation. Therefore, for most of us who don’t want to invest on upgrade fees, it’s urge need to learn how to upgrade your Kia Soul stereo. In this essay, we’ll go through all those steps and show you the clear structure of installation on your own.

top

Before installation, you should pay attention to some important tips. First of all, you can disconnect the power and prepare some tools such as lever or a screwdriver before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.

Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

2012-2015 Kia Soul Radio Installation Instruction

1.First remove the vent panel on the top of the radio with a pry tool, and set it aside.

图片1

2.Then remove the trim panel around the radio with a pry tool, and set it aside.

图片2

3.Unscrew three screws as the picture shows.

图片3

4.Pull out the air condition control without disconnect the harness behind it.

图片4

5.Unscrew four screws holding the radio in dashboard.

图片5

6.Unplug the connectors behind the radio.

图片6

7.Pull out the factory radio.

图片7

8.Insert the wires to the appropriate location of the Seicane radio. If you are not sure about how to wire correctly, you may refer to the wiring diagram for details.

9.Put the Kia soul aftermarket radio into dash.

10.Check whether the new radio working properly.

11.Firm screws, air condition control and panels. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

If you have read those steps of installation, I believe you would be capable of handling your own DIY removal of Kia Soul radio. If you meet some problems during this procedure, you can consult for some experts or pay some external manual fees for upgrades. Certainly, an advanced Kia Soul radio would bring you a lot more fun when you are driving. This product gives you assistance and convenience on display. With 9 inch design, you can quickly see what’s playing, who’s calling, and where you’re going.

In addition, if you want to look for a touchscreen stereo that has Apple CarPlay or Android Auto, this one would definitely be suitable for your taste. They will get your smartphone involved to use navigation apps, such as Waze and Google Maps, appearing beautifully on the stereo’s large display.

In a word, if you want to own this large screen, please visit it now.

end

10Mar 2022

How to upgrade your VW Jetta Radio with Carplay Android Auto by 7 steps

⋅ Leave a Comment

What is the first essential factor that you take into consideration into improving your in-car life? To enhance their driving experience, some people would choose to install an excellent receiver for their vehicles while others might choose to upgrade their radios by themselves. For owners of VW Jetta, it is a pretty straightforward task to get your stereos upgraded when you have the perfect touchscreen unit. In this guide of Seicane’s VW Jetta Replacement, we gave simplified the easy step-by-step in which you can replace your Jettta navigation system, which only takes you not much time or energy.

top

Before installation, you should keep in mind by reading some important tips. First of all, you can turn off your car engine and prepare some removal tools such as lever and screwdrivers before the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.

Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

2016-2018 VW Volkswagen Jetta car radio installation guide

Step 1:  Take out the radio’s front casing carefully by using removal tool.

图片1

Step 2:Use screwdriver to remove the screws nuts and bolts that fasten the factory radios.

图片2

Step 3:pull the old factory radios out from its seating position.

图片3

Step 4: disconnect the radio from the Wires Behind carefully until they just come right out without any issues.

图片4

Step 5: Mount The New Radio system and make sure whether the wires have been accurately connected.(some systems do not require any wire conversions)

图片5

Step 6:Replacing the speakers system with removal tools.

图片6

Step 7: Check whether the new adapters are compatible with the new radio and test the functions of the new touchscreen.

图片7

In fact, there is still a long way to go if you want to further your upgrade goal and the steps above is not enough. Undoubtedly, there are still some other measures that you should add to your actions such as making sure whether the security system can work out or not. Another practical advice is that you should be careful to carry out the steps correctly so as not to increase the cost in the long run if you installed it wrongly. Indeed, a perfect installation will only cost about $20-30$ if you want to upgrade your car radio yourself. Compared to the professional cost, it is low and affordable for everyone. Certainly,if you want to ask for the experts’ support, it is the best as you will not have to worry about future damages because of faulty removal and installation. Another highly recommended way to clean off your trouble of removal is to pick out a decent head unit such as VW Jetta Radio from Seicane, which is built-in Carplay and Android Auto, promising you the best performance. Want to know more things interesting? Please contact us via phone or calls.

end

 

 

 

 

09Mar 2022

The quickest 13 steps to installing JEEP Wrangler radio and speaker system with Carplay Android Auto

⋅ Leave a Comment

Under the influence of pandemic and the war between Russian and Ukraine, many people has suffered from the financial loss and the life quality dropped down to some extent.Undoubtedly, it’s best for most people to install stuff by themselves who are reluctant to go out at this time, no exceptions for car touchscreen unit installer. Suppose you are the user of Jeep Wrangler, you may choose to DIY installation rather than buying service outside as it can reduce your budget and lower the chance of contracting disease. To accomplish the best purpose, there is an essay of Aftermarket Jeep Wrangler radio and speaker system wrote by some experienced person that presents you the clear ways of replacement.

top

Before installation, you should pay attention to some important tips. First of all, you can disconnect the power and prepare some tools such as lever before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.

Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

2011-2017 JEEP Wrangler car radio installation guide

Step 1. Remove top tray and bolt underneath.

图片1

Step 2. remove another bolt behind the switches

图片2

Step 3. Pry off the panel below the steering wheel column to access the two more bolts on either side.

图片3

Step 4. Remove the four bolts around the head unit.

图片4

Step 5. Pry off the side panels.

图片5

Step 6. Remove glove box and lower panel (passenger’s side).

图片6

Step 7. Front speaker removal (passenger’s side).

图片7

Step 8. Unbolt the lower dash panel then pull out speaker from below (driver’s side).

图片8

Step 9. Replacing the tweeters.

图片9

Step 10. Sound bar speaker removed and polyfill fiber inserted.

图片10

Step 11. Power wire and fuse connected to the battery.

图片11

Step 12. Bolting down the ground wire.

图片12

Step 13. Amplifier and subwoofer installed to the trunk.

图片13

Through these 13 steps, most of you should have confidence to complete this installation by yourself. Nevertheless, there is no way to solve all the problems once and for all. Therefore, you need to find some useful and helpful information to meet your need. When you meet the difficulties during this process, you can ask for the technician for help or your car dealer who can offer you the best advice.

If you find they can’t answer your questions in time, you can surf the internet at once such as Seicane, which has focused on making car receiver for many years and here is the link of Jeep Wrangler touchscreen unit of it, making good performance and owning the best performance these years. On the Seicane official website, you can also get the good quality after-sale service as well as 3-year warranty. If you want to get more details or contact them, please leave your comment or visit it now.

end

 

 

27Feb 2022

Easy Installation of 2012-2014 Chevrolet S10 Radio navigation system support Bluetooth Carplay rearview camera

⋅ Leave a Comment

As the user of Chevrolet? What is the first considerable point of improving your in-car life? Is it about driving feeling or speed? Or is it about the entertainment ? As for me, I would like to listen music and watch videos as to add much fun to my driving trip, which pushes me to install a car stereo for my Chevrolet S10. At first I think it is too hard for me to finish it, but after I read the relative articles about it, I have complete the whole process without any pressure. To help those who have the same confuse like me, I want to share some experienced steps about the installation of Chevrolet head unit, which may give you some inspiration.

 top

 

Before installation, you should pay attention to some important tips. First of all, you can disconnect the power and prepare some tools such as lever before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.

Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

2012 2013 2014 Chevrolet S10 stereo removal

1.Gently lever the upper trim housing panel from the dash with a removal tool.

1

2.Lever edges of side panel,release and reposition the shifter.

2

3.Make out 2 screws(this screw and the other corresponding one) from the storage pocket,remove car storage.

3

4.Make out 4 screws which are on the accessory control panel.

4

5.When you remove this very tough panel you should be patient and the clips will loosen.,then let panel hang to side.

5

6.Make out 2 screws from radio control panel,unplug the radio control panel.

6

7.Take out the really strange blue clip absolutely before removing the other connector,and remove the latter one.

7

8.Get out 2 screws which are on the radio chassis,and remove the other 2 screws which are near the top of the stereo,in order to fasten the screen.

8

9.Make screen out by pulling,and get behind clip out.

9

10.There are still 2 screws on stereo,remove them from car head unit.

10

11.Take stereo and connectors out.

11

12.Read installation instructions that within you new bought stereo,precisely make cables connection between new stereo with car.

13.After correct connection,install your new unit into your car and turn on it to test whether your actions are all right.

13.Fix 2 screws to the stereo and install the dvd player in position.

14.Make 2 screws back to the place near top of the stereo,and 2 screws to radio chassis.

15.Make other parts back to original place and don’t forget to firm their screws back to them to fix corresponding machine.

After finishing these 15 steps, it can be said that you have basically finished this difficult project on your own. However, not every beginner can finished perfectly in their first-time try, so if you meet any problems, you can ask for your car dealer for help or you can cost some money to buy the good service offline. But I would like to recommend you to go to the Internet to search the answer as it can save money and time as long as you have network and phone. There is a relative link of Chevrolet Android unit from Seicane, which has engaged in making car receivers for many years.And it covers all of the information including installation videos and buying guide.

Do you want to know more interesting information about it?If you do, please visit it now.

end

23Feb 2022

Step-by-Step Replacement of 2015-2018 aftermarket Ford Edge Radio with Carplay Android Auto

⋅ Leave a Comment

Do you need to change your car radio for your Ford Edge vehicles? Have you ever consider to replace the radio by yourself? As an inexperienced beginner, it is important to know how to replace the radio in a correct way. To avoid some mistakes, the following article of Step-by-step Replacement of 2015-2018 aftermarket Ford Edge Radio with Carplay Android Auto will take as a reference for those who are in need.

top

Before installation, you should pay attention to some important tips. First of all, you can disconnect the battery and prepare some tools such as lever or a screwdriver before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.

Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

2015-2018 Ford Edge Radio Installation Instruction

Step 1.Remove the trim using a dashboard removal trim.

图片1

Step 2.Remove all four 8mm bolts that hold the radio.

图片2

 

Step 3.Pull out the radio carefully so that you can access the cables on the back.

图片3

Step 4.Disconnect the cables from the back. You will need to press small release tabs then pull them out.

图片4

Step 5.Install the new Ford Edge radio in reverse and Connect the wires on the back.

图片5

Step 6. Push the radio all the way in.

图片6

Step 7.Fasten the four screws that hold the radio in place.

图片7

Step 8.Reinstall the dashboard trim.

图片8

After reading these 8 steps, you should get the basic skills of installation of your Ford Edge radio. Don’t forget to check the functions of it. And remember you have to obey some safety rules when you complete this difficult task. One important rule is that you should always wear gloves and safety glasses. You can also tie long hair and work in a well-ventilated area. If you think it is too difficult for you to complete it by yourself, you can ask for your professional car dealer for help or just search the answers via Internet. Here I would like to share a link of the product of Ford Edge Android Unit, which has won many love for customers.

As far as I am concerned,this product has various function, One of the powerful function of it is that it can support the 360°camera is very useful, especially for those who are not good at driving. The 360°camera includes 4 cameras in each corner so that you can drive without dead angles with the help of driving images.

If you are looking for such radio to upgrade your car, please visit Seicane.com to get more information about radio units, installation guide, other car part accessories and so on. You will get the best assistance at once via e-mail or phone. So don’t miss this chance and wish you will be satisfied.

 

end

 

 

 

20Dec 2021

What are the most precise Steps towards Installing Your 2008-2012 Audi A3 Car Stereo?

⋅ Leave a Comment

I love driving my Audi A3 too much because I can listening to the music and get phone calls at the same time. Since I install my 2008 Audi A3 Car radio by my self, the quality of my driving life has been improved apparently. And as the one who would like to do DIY installation of Navigation system, once you devoted yourself into this daunting process,you will learn that upgrading your stereo is not as complicated as it seems. And I have concluded the most precise steps of Installing your 2008-2012 Audi A3 Car stereo, if you follow the advice of it , you will perfectly avoid ending up some mistakes that I did.

Top

 

 

Before installation, you should pay attention to some important tips. First of all, you can disconnect the power and prepare some tools such as lever or removal keys before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.

Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

 

2008-2012 Audi A3 Radio Installation Guide

 

Step 1, Use 4 radio removal keys and insert them into the slots of the car radio system

s1

 

Step 2, Pull the 4 key buckles with appropriate force in order to pull out the radio unit

 

s2

Step 3, Take down the radio unit, remove the key tool, and unplug the connections at the back of the radio unit

s3

 

Step 4, Have a check for the wiring parts of the new car radio unit

 

 

Step 5, Connect the new wiring parts to the car plugs

 

s5

Step 6, Connect the new touchscreen radio head unit to the dashboard

 

 

Step 7, After installing the new radio, start the car to test whether the new radio system functions normally

 

s7

 

Do you decide to try this awesome stuff now? Following the 7 steps that are described in this article will make your experience more easier and more enjoyable. If you still have some questions towards this task, you can find a professional car dealer to help to answer your doubt, or you can just search the result by the Internet as there are full of resources online. If you don’t have an experienced dealer, you can contact the link of 2008-2012 Audi A3 Radio from Seicane,which will help to find your answers and achieve your goals at once.

 

Seicane has been concentrated on making car radio for many years and get the trust by many customers abroad. Anytime you contact it, it will give you the best service at once, especially for who plan to buy the new radio, decoder box, usb dongle etc. Additionally, it will update its stereo system at the first time and give the customer the newest product. It is good at making touchscreen radios with built-in GPS Navigation System which offer incredible convenience and assistance. In one word, it is definitely deserve you to take a look!

End

 

 

 

14Dec 2021

How to upgrade 2008-2015 Toyota Land Cruiser (High Version) Car Stereos easily?

⋅ Leave a Comment

For car radio users, there’s nothing more familiar than upgrading car touch screen by themselves as it can reduce their budget. However, for those who has no experience of installation before, installing these car radios can be difficult task for them due to the lack of relevant professional help. To solve this problem, it is important to have an overview of upgrading the car radio first, which can make the process become easy. Here is a recommended article of 2008-2015 Toyota Land Cruiser(High Version)as a refer,anyone who would like to try the installation can benefit a lot from the following advice.

Top

 

Before installation, you should pay attention to some important tips. First of all, you can disconnect the power and prepare some tools such as lever before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.

Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

 

2008-2015 Toyota Land Cruiser (High Version) Radio Installation Instruction

 

1.Remove the fixed panel on the left side under the radio system

图片1

2.Unscrew the screw and remove the trim frame on the left side of the radio system

图片2

3.Remove the fixed panel on the right side under the radio system

图片3

4.Unscrew the screw and remove the trim frame on the right side of the radio system

图片4

5.Pry to remove the A/C vents, take down the vents and unplug the connectors.

图片5

6.Pry to remove the plastic panel on the top of the radio system.

图片6

7.Remove four screws that fix the screen unit

图片7

8.Take down the screen and disconnect its plugs

图片8

9.Remove four screws that fix the CD unit

图片9

10.Take down the CD unit and unplug the connectors

图片10

11.Correspondingly connect the cables of the new car radio to the car plugs.

图片11

12.Connect the new radio system and install it back to the dashboard.

图片12

13.Install back the trim frames, fixed panels, A/C vents and plastic panel.

图片13

14.Turn on the car to check whether the upgraded radio system functions normally

图片14

By now you should have some idea of what is involved in upgrading your factory Touch screen. Don’t forget to check the function in the last step. It can determine whether your work can be perfectly finished. If you have some questions, you can come to check out our 2008-2015 Toyota Land Cruiser(High Version), where you can tell us what kind of vehicles you would like to have, From there, you will be able to see the details about stereos installation videos, various speakers, decoder box, etc. For these years, Seicane has been one of the famous brand of car stereos, which has been making car radios and appeal to customers from different countries over the seas, especially in the USA, the European countries. Apart from being high quality and the best service, Seicane car radios worth each car users to come and visit as it is affordable as well. And during the installing procedure, if you have any troubles, Seicane sellers will offer you the best technical help, which can meet your need as soon as possible. You can contact them via website and chat.

 

End

25Nov 2021

2014-2018 Mercedes Benz C Class Radio Head Unit Upgrade Guide

⋅ Leave a Comment

Radio system is one of important part of the car, we apply it every time. Driving car with no radio system must be terrible, especially on a long drive, how can we relax and keep away from tiredness and boredom of the journey? On the other hand, we also need a reliable navigation system to help us. Therefore, there should be a multifunctional car radio head unit for our vehicles.

benz

Once you decide to change the factory car radio, you can find lots of decent aftermarket radio system, as well as installation tutorials. The following is an upgrade guide for a 2014-2018 Mercedes Benz C Class radio, you may learn something about it if you have the same car model.

Detailed steps to upgrade your 2014-2018 Mercedes Benz C Class radio

To remove the factory radio and install a new one by ourselves, we should do some preparation including preparing tools like plastic pry tools, screwdrivers. Besides, it’s necessary to cut off the car power to ensure safe work.

Take a look at the original radio system.

原车中控

Step 1, Use a pry tool to pry up on the speaker cover that is right behind the car screen.

s1

Step 2, Use screwdriver to remove two screws that are holding the bracket in place for the stock screen.

s2

Step 3, Slide out the old screen and disconnect the two plugs on the back of the bracket.

s3

Step 4, Press to open the armrest box near the handbrake, then use a pry tool to remove the silver trim piece

s4

Step 5, Remove the two screws

s5

Step 6, Then lift up on the center console and set it aside

s6

Step 7, Remove two screws that fixed the original radio unit

s7

Step 8, Pull out the original radio unit and remove the connections

s8

Step 9, Connect cables of new touchscreen radio system to the car plugs

s9

Step 10, Connect the original radio unit to the car via the new wiring cables, and install it back to the dashboard

s10

Step 11, Connect and place well the AUX connector

s11

Step 12, Install back the center console

s12

Step 13, Install the new bracket (used to stabilize the new screen) , pull the new cable ports (used to connect the new car screen) go through the new bracket, then fix the new bracket well

s13

Step 14, Connect the new screen to the car

s14

Step 15, Fix well the new screen

s15

Step 16, Install back the speaker cover

s16

Step 17, Now you can turn on the car to test the new Android radio system

安装对比图

Introduction of Seicane H857 Android Car Radio for 2014-2018 Mercedes Benz C Class

No one can deny that with a quality car radio in our Benz vehicles, the drive will be better. While in this guide, we choose the Seicane H857 Android Touchscreen Car Radio with GPS for our car. The product offers a variety of advantages.

Excellent configuration

This radio is equipped with 10.25” IPS touchscreen, Android 10.0 system, 8-core CPU, 4GB RAM & 64GB ROM, providing us with smooth operation and stable performance. On the other hand, there are various Android apps can be downloaded and stored in the radio, they would make your drive more fun.

Enjoy the coolest music

With this advanced car radio system, you are able to connect it to the Internet via 4G and WIFI network, access to the Internet at a high speed. Just turn on your music app, to get the newest and coolest songs. And by setting DSP, enjoying perfect sound effect.

Phone connections

It’s easy to connect your phone to the radio by Carplay/Android Auto and Bluetooth, so as you can apply phone applications freely. For example, you can use phone navigation with SIRI control, make Bluetooth hands free calls to keep safety on the road etc.

There are many benefits by using this large touchscreen radio. Invest it to your car now.

安装效果

10Nov 2021

Android Car Stereo Installation Guide in 2012-2015 Toyota Reiz Mark X

⋅ Leave a Comment

Whenever and wherever we drive, the car stereo is an important assistant. It plays wonderful music when we feel tired and bored, it navigates us to the correct destination in a safe and fast route, it helps improve driving safety etc. However, all these things can be true only when you having a multifunctional touch screen car stereo system. If there is only an older stereo in your car, I am afraid you have to listen to the same radios or music in every drive. That won’t be a good experience.

car-trip

Spend some dollars, you will be able to get an upgraded stereo. Some cars’ basic stereo is easy to replace, such as the 2012-2015 Toyota Reiz Mark X stereo. Whether you are the owner of 2012-2015 Toyota Reiz Mark X or not, you’ll learn some tips in this stereo upgrade guide.

Installation Steps of 2012-2015 Toyota Reiz Mark X GPS Navigation Stereo System

You have many choice in purchasing the upgraded car stereo, we would like to recommend the Seicane Android Car Stereo with GPS (product model: H6162) for you. After getting the new stereo, you should prepare some tools like plastic pry tools, screwdrivers etc. And to make sure the safety, it’s better to cut off the car power before working.

Take a look at the factory radio of Toyota Reiz Mark X.

原车中控

Step 1, Remove the trim panels on the two sides of the stereo.

s1

Step 2, Remove screws that fixed the car stereo.

s2

Step 3, Take down the whole stereo and disconnect the plugs.

s3

Step 4, Remove screws of the metal brackets that fixed the original main unit and the A/C button panel.

s4

Step 5, Separate the main unit and the A/C button panel.

s5

Step 6, Keep the A/C button panel and install it back to the dash.

s6

Step 7, Tighten the screws.

s7

Step 8, Connect Power Harness, RCA Cable and CAM Cable to the Seicane stereo.

s8

Step 9, Correspondingly connect the new stereo cables to the car plugs. Read the user manual to get help if you are not sure the ports.

s9

Step 10, Install the touchscreen stereo to the dash.

s10

Step 11, Install the trim panels back.

s11

Step 12, Power on the car to test the new GPS navigation stereo system to see whether it functions well.

功能

This 9” touchscreen Android head unit comes a lots of features and functions that make your drive easier and safer.

  • It supports 3D navigation. When you use this unit to navigate to somewhere, it shows you comprehensive navigation information, such as the current location, speed, mileage, landmark building display, 3D street view etc, so as you get to the destination quickly and safely.
  • The product can apply various radio channels. If you are a radio enthusiast, then you are provided with FM, AM, RDS radios by this product. What’s more, the radio area is worldwide, including Asia, Europe, Russia, Japan, USA, China and so on.
  • Apart from radios, you can play good music in the stereo. Since it supports 3G/4G/WIFI network, you’ll get chances to find your favorite singers’ latest songs once connecting to the Internet.
  • At time waiting someone, how about watching some videos or movies? The high-resolution gives you amazing viewing experience.
  • Adding some external car cameras like rear view camera, DVR to help increase safety. When you need to reverse to park a car, with a rear view camera installed, the stereo system can automatically switch to the parking images, thus you can park the car easier.

Don’t hesitate to upgrade your factory stereo now, let it be the perfect assistant on your journey!

road-trip

22Oct 2021

Aftermarket GPS Car Radio Replacement Instructions for 2010-2013 BMW X5 E70 (CIC System)

⋅ Leave a Comment

Vehicles come with different radio systems due to their makes, years, models. Some of them look wonderful and offer various functions. While some are old-fashioned designs with simple functions, especially the older the car, the older the radio. But, whatever your original car radio looks like, there is always room for you to make improvement. Just spend several seconds to read this article, you’ll get to know how to install a car radio.

car-stereo-system

No matter which car you do the radio replacement work, here are some tips you need to know. Firstly, prepare handy tools which may include plastic pry tools, screwdrivers in different size, tape, power drill etc. Secondly, as we will work on the auto power system, for safety, it’s better to keep car power off during the removal and installation process.

Now, let’s check out all the steps to finish the replacement.

Radio replacement on a BMW vehicle

Car model: 2010 2011 2012 2013 BMW X5 E70 (CIC System) 

New radio: Seicane H814 Android Touchscreen GPS Radio System

Section 1, How to remove the original radio?

Step 1, Use the plastic pry tool to pry open the A/C outlet, take down the outlet and disconnect its plug.

s1-1s1-2

Step 2, Remove two screws that fixed the original radio screen, one at left side, another at right side. Take down the screen and unplug the connectors.

s2

Step 3, Remove screws that fixed the button panel, then pry to open it and take it down, as well as disconnect the plugs.

s3-1s3-2s3-3

Step 4, Remove screws that fixed the original DVD unit, take it down and unplug all the connectors.

s4

Section 2, How to install a new radio?

Step 5, Have a check for the wiring harness as well as other accessories of the new radio screen system from Seicane.

s5

Step 6, Connect the new wiring harness to car plugs, then correspondingly connect the new radio screen and original DVD unit. Check the user manual to get help if you have difficulties in distinguish different interfaces.

s6

Step 7, After connecting the new screen and factory DVD unit, you can turn on the car to test the new radio system, if everything works normally, then install all the car parts back. If there is problem, check carefully whether the cables are connected correctly.

s7

A quick look of Seicane touchscreen radio for BMW vehicle

Bigger screen to provide better sight

This for 2010 2011 2012 2013 BMW X5 E70 (CIC System) radio mainly consists of a 10.25″ IPS screen, which looks very exquisite and supports touchscreen operation. You can enjoy videos at a perfect view. What’s more, when you use the navigation, everything about the route will be shown super clear on the large display. This makes huge differences compared to the original small screen.

More functions to have more fun

The time when boredom and fatigue hit you on the drive, Seicane car radio will be the best way to help you get refresh. You can listen to FM/AM/RDS radios, enjoy some songs of your favorite singers, find interesting videos on Youtube, surf the Internet to know news, etc. With the Carplay functions, you can play phone applications on the radio screen.

Increase driving safety on the journey

With integrated technology in the radio, you are able to add external car cameras to the GPS stereo system to make your drive safe and easy, including backup camera, driving recorder, rear view camera and more.

road-trip