To enhance the capabilities of your factory radio, it’s a great idea to replace it with a new aftermarket car radio which can bring you many features to meet your different needs at a time. To help you better install your new radio, I’d like to recommend the detailed 2005 2006 2007 Chrysler 300 Limited/Touring radio installation instruction from Seicane, if you have the same dashboard as the picture below, you can refer to it.
2005 2006 2007 Chrysler 300 Limited Touring radio after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2005 2006 2007 Chrysler 300 Limited/Touring radio installation guide
1.Loosen the trim panel with a lever.
1.Loosen the trim panel with a lever
2.Take the panel off the dash and disconnect the wires from the car.
2-1.Take the panel off the dash and disconnect the wires from the car.
2-2.Take the panel off the dash and disconnect the wires from the car.
3.Remove the four screws which are holding the original radio with a screwdriver.
3.Remove the four screws which are holding the unit with a screwdriver.
4.Take out the original radio and disconnect the wire harness at the back of the original radio.
4-1.Take out the unit and disconnect the wire harness at the back of the unit.
4-2.Take out the unit and disconnect the wire harness at the back of the unit.
5.Check all the accessories for the new Seicane radio.
5.Check all the accessories for the new Seicane car radio.
6.Connect the Seicane radio to your original car radio ‘s plugs.
6-1. Connect the Seicane car stereo to your original car radio ‘s plugs.
6-2. Connect the Seicane car stereo to your original car radio ‘s plugs.
6-3. Connect the Seicane car stereo to your original car radio ‘s plugs.
7.Put the new Seicane radio into the dash.
8.Turn on the new radio and have a test if the new Seicane radio is working without problem..
9.Put trim panel back on your new Seicane radio after the normal test.
All the steps to install a 2005 2006 2007 Chrysler 300 Limited/Touring radio are shown as the above. Can you finish the installation on your own under the guidance of it? If not, you’d better ask a professional for help. By the way, some of you may don’t know how to find a suitable radio for your car, here I’d like to recommend an excellent 2005 2006 2007 Chrysler 300 Limited/Touring radio from Seicane to you. Please click for more details:
With this intelligent Chrysler 300 Limited/Touring radio in your car, you can enjoy both your favorite videos and music to relax in your car with this powerful multimedia player which can support a variety of audio and video formats including MP4/MPEG/MPG/ASF/WMV/MOV/AVI/3GP/M4V/MGV/VW/DIVX/MKV/WVX/MPV,etc. Turn on the GPS function, intelligent route planning, turn-by-turn direction and voice prompts are all provided for you to arrive at your destination. To keep safe and pleasant, you can easily sync with your enabled mobile phone for hands-free calls and music streaming.
To have a different journey from now on, just install this amazing Chrysler 300 Limited/Touring radio in your car. Good luck to you!
Recent Comments