Category Archives: Car Dvd Dodge

Travelling in one’s one car has become more and more prevailing these years. On a long trip, a relaxing experience naturally means a lot to both drivers and passengers. In that case, car owners try their best to improve their car interior environment. Among all the ways, replacing the factory radio with a new one is the easiest and the best. If you also have such a plan, a detailed head unit installation guide can be helpful for you. Here I’d like to share a step-by-step 2007 2008 Dodge Caliber head unit installation guide from Seicane with you. Wish you can get some help from it.

2007 2008 Dodge Caliber head uni after installation

Some tips before the installation:

1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2007 2008 Dodge Caliber head unit installation guide

1.Loosen the trim panel with a lever.

1.Loosen the trim panel with a lever

2.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.

2-2.Take the panel off the dash and disconnect the wires from the car.

3.Remove the four screws which are holding the original radio with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.

4.Take out the original radio and disconnect the wire harness at the back of the original radio.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.

5.Check all the accessories for the new Seicane unit.

5.Check all the accessories for the new Seicane car radio.

6.Connect the Seicane unit to your original car radio ‘s plugs.

6-1. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-2. Connect the Seicane car stereo to your original car radio ‘s plugs.

7.Put the new Seicane unit into the dash.

7.Put the new Seicane stereo into the dash.

8.Turn on the new radio and have a test if the new Seicane unit is working without problem..

9.Put trim panel back on your new Seicane unit after the normal test.

That’s all the removal and installation instruction for a 2007 2008 Dodge Caliber head unit. Please make clear every step before you start to install a new stereo. If you encounter any problem during the whole process, you can ask your dealer for help. If you don’t have enough experience to install a new unit, you can turn to a professional for help.

In addition, do you have a suitable unit for your car? If not, I’d like to recommend an intelligent 2007 2008 Dodge Caliber head unit from Seicane to you. It’ s an ideal head unit replacement for 2007 2008 Dodge Caliber owners. For more details, you are welcome to click the link as follow:

http://www.seicane.com/top-2006-2007-2008-dodge-caliber-in-dash-dvd-gps-audio-navigation-system-bluetooth-music-tv-tuner-radio-rds-aux-usb-sd-ipod-iphone-steering-wheel-control-reverse-camera-t6015

This top Dodge Caliber head unit comes with a With a 5 inch 800*400 multi-touch screen, you can enjoy your favorite videos to relax yourself and your passengers in your car. The region-free DVD multimedia player enables you to play all DVD disks all over the world. By simply connecting your compatible mobile phone, you can make and receive hands-free calls and stream music to ensure safety and enjoyment during your driving. The functions of your steering wheel control can still remain after the installation. Just take it and enjoy yourself from now on!

Are you desired a more relaxing and comfortable driving experience while you are navigating to your destination? Most of car owners definitely say yes. In that case, you can simply upgrade your factory radio with a new multifunctional head unit which can bring a lot of convenience and enjoyment for you. And you don’t have to worry about the installation which is actually not too complicated. Now I’d like to share a detailed 2006 2007 2008 Dodge Caliber head unit installation guide from Seicane with you. If you have the same dashboard as that shown in the image below, then you can take it as a reference.

2006 2007 2008 Dodge Caliber head unit after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

2006 2007 2008 Dodge Caliber head unit installation guide

1.Loosen the trim panel with a lever.

1.Loosen the trim panel with a lever

2.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.

2-2.Take the panel off the dash and disconnect the wires from the car.

3.Remove the four screws which are holding the unit with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.

4.Take out the unit and disconnect the wire harness at the back of the unit.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.

4-2.Take out the unit and disconnect the wire harness at the back of the unit.

5.Connect the new wiring harness adaptor to the car, then, to the unit.

5-1.Connect the new wiring harness adaptor to the car, then, to the unit.

5-2.Connect the new wiring harness adaptor to the car, then, to the unit.

6.Connect the wire as the user manual shows and put the new unit into the dash.

6.Connect the wire as the user manual shows and put the new unit into the dash.

7.Turn on the new unit and have a test if the new Seicane unit is working without problem..

8.Put trim panel back on your new Seicane unit after the normal test.

Can you install your new Dodge Caliber head unit on your own under the guidance of this instruction? If not, you’d better ask a professional for help. Please make sure you are clear about every step before you start your work. In addition, you need to confirm you have a fitting unit for your car, if you don’t have one, I’d like to recommend this amazing Dodge Caliber head unit from Seicane to you, please click:

http://www.seicane.com/seicane-s09206-android-dvd-player-gps-navigation-system-for-2006-2007-2008-dodge-caliber-with-radio-obd2-bluetooth-hd-touch-screen-dvr-rearview-camera-tv-wifi-usb-sd-steering-wheel-control-mirror-link-video

No matter you are going to have a long travel or find a new restaurant for your family, you can take this magic Dodge Caliber head unit with GPS navigation system to get the lane assist, 3D street view, landmark display, route planning, thousands of points of interest, turn-by-turn direction and voice prompts. What’s more, thanks to a number of audio and video formats to be supported, this multimedia player can must relax and amuse both you and your passengers on the way.