Category Archives: Car Dvd Hyundai

08Apr 2016

Easy 10 steps to install a new 2014 2015 HYUNDAI MISTRA car stereo with Capacitive Touch Screen USB SD Bluetooth 3G WiFi

⋅ Leave a Comment
2014 2015 HYUNDAI MISTRA car stereo after installation

To get more and more convenience and entertainment in your car, a factory radio which can just support music and radio is just not enough. Now the modern head unit with a wide range of features can meet almost all the needs of a car owner. Therefore, you can easily replace your factory radio with a new unit to get what you want. Please look at the picture below, it’ s an excellent 2014 2015 HYUNDAI MISTRA car stereo from Seicane. If you want to replace your factory radio, you can read this article carefully to help with the installation.

2014 2015 HYUNDAI MISTRA car stereo after installation

2014 2015 HYUNDAI MISTRA car stereo after installation

 

 

Tips about the installation:

 

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

 

 

2014 2015 HYUNDAI MISTRA car stereo installation guide

1·Remove the original console panel with a plastic knife, pry gently along the gap and pick up the panel. Then set it aside.

1. Remove the original console panel with a plastic knife

1. Remove the original console panel with a plastic knife

 

2·Remove the four screws that fixed the radio on the dashboard. Remove these screws will not be a difficult job.

2. Remove the four screws that fixed the radio on the dashboard

2. Remove the four screws that fixed the radio on the dashboard

 

3·Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

3. Pull the factory radio out of the dash

3. Pull the factory radio out of the dash

 

4·Unplug the connectors.

4. Unplug the connectors

4. Unplug the connectors

 

5·Remove the brackets on both sides of the factory radio. So far the removal of the factory radio is completed. Next steps will move to the installation of the Seicane stereo.

5. Remove the brackets on both sides of the factory radio

5. Remove the brackets on both sides of the factory radio

 

6·Install the brackets on both sides of the Seicane stereo.

 

7·Dock the connectors of the original vehicle and the upgraded car audio.

7. Dock the connectors of the original vehicle and the upgraded car stereo

7. Dock the connectors of the original vehicle and the upgraded car stereo

 

8·Insert the wires to the appropriate location of the upgraded head radio. If you are not sure about how to wire correctly, you may refer to the wiring diagram for details.

 

9·Fix the Seicane stereo with the four screws.

9. Fix the Seicane stereo with the four screws

9. Fix the Seicane stereo with the four screws

 

10·Firm the console panel. Finally the new Seicane stereo is installed and a comprehensive test should be conducted on the new radio.

Firm the console panel.

10. Firm the console panel

10. Firm the console panel

 

That’s the step-by-step installation guide for a 2014 2015 HYUNDAI MISTRA car stereo. If you don’t understand all the steps, please do consult your dealer or a professional. If you don’t find an ideal replacement for your factory radio, I’ d like to recommend a modern 2014 2015 HYUNDAI MISTRA car stereo from Seicane to you, please check it out for more details:

 

http://www.seicane.com/10-2-inch-aftermarket-android-radio-gps-navigation-system-for-2014-2015-hyundai-mistra-with-capacitive-touch-screen-tpms-dvr-obd-ii-headrest-monitor-control-usb-sd-bluetooth-3g-wifi-video-aux-rear-camera-s081882

 

This intelligent HYUNDAI MISTRA car stereo comes with a wonderful GPS navigation system, you won’t have any difficulty in finding your way to your destination with this latest GPS navigation system which can provide text-to-speech guidance for you. The Bluetooth technology for hands-free calls and streaming music is fantastic for you keep your journey safe and pleasant.

23Mar 2016

A step-by-step installation guide for a 2011-2016 Hyundai Accent WIT Hatchback head unit with Android 4.4.4 3G WIFI Bluetooth DVD player FM AM radio 

⋅ Leave a Comment
2011-2016 Hyundai Accent WIT Hatchback head unit after installation

When you own a beloved car, you must want to enjoy a relaxing or exciting driving experience. It’s a good choice for you to replace your factory radio with a new aftermarket head unit for that. The picture below is an advanced 2011-2016 Hyundai Accent WIT Hatchback head unit after installation from Seicane, if you find it the same as your dashboard, then you can read carefully the following Hyundai Accent WIT Hatchback head unit installation guide as a reference to help with the installation..

2011-2016 Hyundai Accent WIT Hatchback head unit after installation

2011-2016 Hyundai Accent WIT Hatchback head unit after installation

 

 

Some tips before the installation:

  1. Please disconnect the power before the installation.
  2. Please prepare a lever and a screwdriver before the removal and the installation.
  3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

 

 

2011-2016 Hyundai Accent WIT Hatchback head unit installation guide

  1. Remove the trim panel with a lever.

    2011-2016 Hyundai Accent WIT Hatchback head unit installation step 1

    2011-2016 Hyundai Accent WIT Hatchback head unit installation step 1

 

  1. Unscrew the screws on the units and put them away.

    2011-2016 Hyundai Accent WIT Hatchback head unit installation step 2

    2011-2016 Hyundai Accent WIT Hatchback head unit installation step 2

 

  1. Take the original radio out of the dash.

    2011-2016 Hyundai Accent WIT Hatchback head unit installation step 3

    2011-2016 Hyundai Accent WIT Hatchback head unit installation step 3

 

  1. Disconnect the connectors at the back of the original radio.

    2011-2016 Hyundai Accent WIT Hatchback head unit installation step 4

    2011-2016 Hyundai Accent WIT Hatchback head unit installation step 4

 

  1. Install the new Seicane head unit. The installations of different units are different. You should refer to the installation instruction from the dealer and connect the new Seicane head unit to the original wiring harness. If it needs a wiring harness adaptor, connect the adaptor to the original wiring harness first, then, connect the adaptor to the new Seicane head unit.

    2011-2016 Hyundai Accent WIT Hatchback head unit installation step 5

    2011-2016 Hyundai Accent WIT Hatchback head unit installation step 5

 

  1. Turn on the new Seicane head unit and test it. Connect the negative cable on the battery and turn on the new Seicane head unit to test all the functions in it. If everything’s good, fix the screen by putting it hard to the dashboard and fix the DVD player with screws.

    2011-2016 Hyundai Accent WIT Hatchback head unit installation step 6

    2011-2016 Hyundai Accent WIT Hatchback head unit installation step 6

 

 

  1. Install the screws and the trim panel back to their original place.

 

 

That’s all the installation guide for a 2011-2016 Hyundai Accent WIT Hatchback head unit. Wish it can be helpful for you. If there is any question, you can seek help from your dealer or a professional. However, if you find it too hard for you to finish it on your own, it’s suggested you ask a professional to install it.

 

To have a successful installation, a right head unit plays an important role. Therefore, it’s wise of you to pick up a suitable head unit for your car. If you don’t have one, I’d like to share a modern 2011-2016 Hyundai Accent WIT Hatchback head unit from Seicane with you, please click:

 

http://www.seicane.com/seicane-s127202-16g-2011-onward-hyundai-accent-wit-hatchback-sistema-gps-android-4-4-4-autoradio-dvd-aftermarket-oem-con-quad-core-cpu-espejo-enlace-obd2-3g-wifi-bluetooth-music-retrovisor-camara-hd-1080p-video

 

This Hyundai Accent WIT Hatchback head unit is loaded with a 3D real-time GPS navigation system for you to get to your desired destination with ease. To wirelessly pair your mobile phone with this unit, hands-free calls and streaming music are accessible to you for the safety and enjoyment on all your ways. You can also play your favorite movies or listen to your favorite radios to entertain your passengers. Besides, a rearview camera can also be allowed to connected for easier parking.

 

Enjoy all your trips from now on, this amazing Hyundai Accent WIT Hatchback head unit is just your best choice. Good luck to you!

 

 

03Jul 2015

How to remove and install 2010 2011 2012 2013 Hyundai Verna head unit with GPS system radio bluetooth function

⋅ Leave a Comment

As one of the owners of Hyundai Verna for 2010 2011 2012 2013,what do you think of removing original CD player of it and upgrade a more advanced one?

Many people choose it just to catch up with trend,however,it will also bring us more entertaining and convenient life.And this article will show you how to remove and install 2010 2011 2012 2013 Hyundai Verna head unit with GPS system radio bluetooth function.

Here is an image of new unit after upgrade,car head unit stereo navigation system of 2010 2011 2012 2013 Hyundai Verna.This is an aftermarket radio which is suitable for the car,it’s specially produced for Hyundai Verna,thus trim panels of original one’s and this one’s are same.

new unit after upgrade,car head unit stereo navigation system of 2010 2011 2012 2013 Hyundai Verna

new unit after upgrade,car head unit stereo navigation system of 2010 2011 2012 2013 Hyundai Verna

If you decide to remove and install the head unit by yourself,you can ask a professional person for help who can make a judgement on whether you did is correct or wrong.You can act like this,and it’s also all right if you do it yourself with precise installation guide.In that case,you should do as following installation guide show,and make much preparations for it.You can visit some websites to get more detailed useful information,for example:http://www.seicane.com/2-din-dvd-gps-head-unit-mount-for-2010-2011-2012-2013-hyundai-verna-with-3d-navigation-bluetooth-music-tv-tuner-am-fm-radio-dvr-pop-ipod-iphone-hd-1080p-video-backup-camera-aux-c067.And prepared some tools which may be needed in the process,include a screwdriver, a lever and so on.

2010 2011 2012 2013 Hyundai Verna head unit removal and installation:

1.Prize the lower part of the dashboard with a soft pry tool

Prize the lower part of the dashboard with a soft pry tool

Prize the lower part of the dashboard with a soft pry tool

2.Gently remove the dashboard and disconnect the cable

Gently remove the dashboard and disconnect the cable

Gently remove the dashboard and disconnect the cable

3.Remove these four screws with a screwdriver

Remove these four screws

Remove these four screws

4.After that,you can gently make out the CD player and disconnect the cables back of it

gently make out the CD player

gently make out the CD player

disconnect the cables back of it

disconnect the cables back of it

5.Sort out wires well,pry the plastic panel away from CD radio with a lever

Sort out wires well

Sort out wires well

pry the plastic panel away from CD radio with a lever

pry the plastic panel away from CD radio with a lever

6.Remove these four screws as the picture show

Remove these four screws as the picture show

Remove these four screws as the picture show

7.Install the new head unit into car and fix the screws on it

Install the new head unit into car

Install the new head unit into car

fix the screws on it

fix the screws on it

8.Connect all cables between the new radio and car and do it carefully

Connect all cables between the new radio and car and do it carefully

Connect all cables between the new radio and car and do it carefully

Before you install Hyundai Verna head unit,you’d better read the installation instructions carefully first to make clear how the wires should be connected.Then make connections step by step as it shows.If you are not very sure about it,then check the connection again before you mount new unit into the car.

I guess thetime when you are driving a car with upgraded car head unit must be very entertaining,especially when you are on a free journey with your family or friends.We can enjoy good time by listening to music,watching HD videos,searching Internet and so on.

The 3D GPS navigation system is very helpful for people who are lazy to remember roads or not good at recognizing roads.What’s more,when you are in a strange place,and you are hardly find right direction,don’t worry,your new stereo unit can draw an intelligible map on the screen,you can see it directly.

Precautions after installation:

Your car will possibly enter heat protection mode if your car head unit with GPS BT is operated abnormally,such as runs with very fast speed for a long time,or meet the situation when temperature is over 70 degrees.At this kind of case,you should pay more attention to it.

I have another essay which is about Hyundai I30 navigation dvd installation,if you are interested it,you can have a look at it,there are also many other cars’ stereo installation there.

 

27Apr 2015

How to install 2012 Hyundai I40 gps radio with bluetooth music

⋅ Leave a Comment

New unit after installation,gps radio dvd player autoradio of 2012 Hyundai I40.

New unit after installation,gps radio dvd player autoradio of 2012 Hyundai I40

New unit after installation,gps radio dvd player autoradio of 2012 Hyundai I40

Confirming mode,appearance and years is very easy which can get from the Internet,but if it’s about how to install 2012 Hyundai I40 gps radio with bluetooth music?

Facts shows that there are many people,who are owners of Hyundai I40,can install dvd player into the car themselves.You must have doubts about it,but it’s true.I probably know why they can do this because these men have made it clear about Hyundai I40 gps nav system installation instructions.

Now let’s look at front picture again,a lot of people may don’t know what a new stereo looks like,they have the desire to replace one but have no idea about what to do.It’s ok,your problems will be solved here.

Firstly,you need to find a stereo from car market which looks like above one in the picture.After that,I think this unit is strange to you,there are a lot of things that you are not clear,so you’d better do some search works about this upgraded unit,for example,you can visit next website to help getting more information:http://www.seicane.com/double-din-2012-hyundai-i40-gps-radio-auto-a-v-system-3g-wifi-cd-dvd-player-bluetooth-music-tv-tuner-dvr-hd-1080p-aux-steering-wheel-control-usb-sd-ipod-mp3-mp5-c172.

With full understanding about it,next we will begin to know what should we do step by step about Hyundai I40 radio installation.

2012 Hyundai I40 audio removal and installation:

1.Use a lever to remove trim panels from each side of center console

Use a lever to remove trim panels from each side of center console

Use a lever to remove trim panels from each side of center console

2.Take out 4 screws  from trim panel of radio

Take out 4 screws from trim panel of radio

Take out 4 screws from trim panel of radio

3.Take ac vent controls out

Take ac vent controls out

Take ac vent controls out

4.Take 4 screws out which securing radio chassis to sub dash

Take 4 screws out which securing radio chassis to sub dash

Take 4 screws out which securing radio chassis to sub dash

5.Pull the CD player off

Pull the CD player off

Pull the CD player off

6.Unplug radio chassis,and remove it

Unplug radio chassis,and remove it

Unplug radio chassis,and remove it

Removal affairs has been accomplished,if you have also finished cd radio removal,you can have a comparison between yours and the one in the picture.If they look same,then you can start to mount your new car radio.

7.Connect the cables between new radio and car correctly,you can do it after you have a patient reading for installation guide.

8.Fix screws to their original places and reinstall trim panels to the dashboard

9.After all these,you can turn on your new head unit and have a check to see whether you have done all steps right

It won’t be a dangerous work as long as you can act according to right instructions of installation process. New unit of the car has new functions including navigation system,which will bring you much convenience.But please remember do not let the movies disturb your attentions when you are driving,really it can bring us convenience but not let the nav system instead of your head.

Precautions about installation and usage of the radio:

1.When you haven’t received any electronic equipment or lack of experience, don’t install or repair the stereo because it is very dangerous

2.If you use sharp objects or even fingers to operate the unit,it will damage the screen,please use a touch screen pen to do it

3.In case of the power is on,please don’t do self- maintenance,service, or install the radio

 

02Apr 2015

How to install 2010 2011 2012 2013 Hyundai Verna gps 2 din dvd

⋅ Leave a Comment
new unit after installation,autoradio gps nav bluetooth of 2010 2011 2012 2013 Hyundai Verna

new unit after installation,autoradio gps nav bluetooth of 2010 2011 2012 2013 Hyundai Verna

What do you think of removing an original CD player of Hyundai Verna and replace a more advanced one?The whole process may only take about few minutes to professional car stereo removal staffer. If you are willing to remove the unit by yourself, you’d better ask a professional people for help which can make sure what you did is correct.Actually we should pay more attention to how to install 2010 2011 2012 2013 Hyundai Verna gps 2 din dvd player than the old radio removal. You should do as the installation guide showing then connect the wires of the new Toyota Avalon radio stereo correctly. Or, the new unit may not work well in your car.

You can prepare tools for the mount, too, and you may need a screwdriver, a lever and so on.The following are the installation steps for the head unit of 2010 2011 2012 2013 Hyundai Verna. Before you begin the removal please apply the parking brake and remove the negative cable on the vehicle battery to make sure your safety.

1.Pry the lower part of the dashboard with a soft lever

pry the lower part of the panel with a soft lever

pry the lower part of the panel with a soft lever

2.Remove the dashboard gently and disconnect the cable

remove the dashboard gently

remove the dashboard gently

3.Take out four screws with a screwdriver

take out four screws with a screwdriver

take out four screws with a screwdriver

4.After that,you can gently take out the CD player and disconnect the cables behind it

gently take out the CD player

gently take out the CD player

disconnect the cables behind it

disconnect the cables behind it

5.Sort out wiring well,prize the plastic panel away from CD player with a lever

sort out wiring well

sort out wiring well

prize the plastic panel away from CD player with a lever

prize the plastic panel away from CD player with a lever

6.Remove four screws like the picture show

remove four screws

remove four screws

7.Install the new unit into it and firm the screws

install the new unit into it

install the new unit into it

firm the screws

firm the screws

8.Connect the cables between the new player and the car and install it carefully

connect the cables between the new player and the car

connect the cables between the new player and the car

Before you start up to install Hyundai Verna gps car radio, please read the installation instructions carefully from the dealer if you have it. Please mind to connect the new unit antennas to right positions,this is very important.

In order to ensure that your radio nav system can be used longer,I advice you to mount the car unit according to right steps.It surely will  make your usual life more colorful with good mount and maintance.It’s normal that you meet some problems that can’t solve by yourself,at that time you can visit websites for help include the next one: http://www.seicane.com/2-din-dvd-gps-head-unit-mount-for-2010-2011-2012-2013-hyundai-verna-with-3d-navigation-bluetooth-music-tv-tuner-am-fm-radio-dvr-pop-ipod-iphone-hd-1080p-video-backup-camera-aux-c067.

Here are some attentions for your upgrade things:

Your car will probably enter heat protection mode if the gps nav system is operated abnormally,such as operated with very fast speed for a long time,or when temperature is over 70 degrees.Therefore you really need to be careful of it to avoid this normal phenomenon during driving.Wish you good luck!