Category Archives: Car Dvd Kia

2015 KIA Sorento car stereo after installation

As is known to most car owners, a GPS navigation system which can provide the most accurate direction can easily guide you to your destination. And a multifunctional car radio integrated with a GPS navigation system and a multimedia player can also add a huge ton of fun on the way. Therefore, more and more car owners try to replace their factory radio. Please look at the following image which is an amazing 2015 KIA Sorento car stereo from Seicane. To replace your factory radio, you can refer to the following installation instruction.

2015 KIA Sorento car stereo after installation

2015 KIA Sorento car stereo after installation

 

 

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

 

 

2015 KIA Sorento car stereo installation guide

 

1)Pry off the trim panel with a pry tool.

2015 KIA Sorento car stereo installation step 1

2015 KIA Sorento car stereo installation step 1

 

2)Remove the trim panel and disconnect cables at the back of it.

2015 KIA Sorento car stereo installation step 2

2015 KIA Sorento car stereo installation step 2

 

3)Remove 4 screws holding the unit with a Phillips screwdriver.

2015 KIA Sorento car stereo installation step 3

2015 KIA Sorento car stereo installation step 3

 

4)Gently take out factory radio.

2015 KIA Sorento car stereo installation step 4

2015 KIA Sorento car stereo installation step 4

 

5)Then disconnect cables at back of the radio.

2015 KIA Sorento car stereo installation step 5

2015 KIA Sorento car stereo installation step 5

 

6)Connect the cables on the new Seicane stereo as the user manual shows and place them well.

7)Put the new head unit into the dash.

8)Turn on the new head unit and have a comprehensive check if it works well.

9)Install 4 screws back to their original position.

10)Check whether the Seicane stereo is working without problem.

11)If everything is OK, firm removed screws that are put aside, then make trim panel back on your new Seicane stereo.

 

If you have any questions about the installation, you can turn to your dealer or a professional for help. Wish you can get some help from the above installation guide. If you don’t have an ideal stereo for your car, I’ d like to recommend this wonderful 2015 KIA Sorento car stereo from Seicane to you, please click:

 

http://www.seicane.com/10-2-inch-android-radio-gps-navigation-system-for-2015-kia-sorento-with-capacitive-touch-screen-tpms-dvr-obd-ii-headrest-monitor-control-usb-sd-bluetooth-3g-wifi-video-aux-rear-camera-s083991

 

A variety of entertainment options are compatible with this KIA Sorento car stereo for you to relax both yourself and your passengers, including DVD, VCD and CD player, FM/AM radio, Ipod, TV, bluetooth music, etc. Besides, you can also get access to hands-free calls by wirelessly connecting with your enabled mobile phone via bluetooth technology. With the GPS of high precision, you can travel to anywhere without getting lost any longer.

 

Wish you’d like this remarkable KIA Sorento car stereo and have a wonderful time with it! Good luck to you!

It seems that install a new aftermarket radio on your KIA Picanto is a whole day job. Not really, you can totally install it by yourselves. But if you didn’t install a radio before, you’d better turn to a professinal technician for help. A wiring diagram specially made for 2004-2011 KIA Picanto Radio from your dealer would be great help during the process of the installation.

This is the picture of Seicane 2004-2011 KIA Picanto Radio after installation.

2004-2011 KIA Picanto Radio after installation

2004-2011 KIA Picanto Radio after installation

If you have the same dashboard with the picture shows, you can follow the instructions below.

 

Precautions before installation:

1.Before you begin any work, remember to disconnect negative power cable to avoid danger

2.Please turn off your car series include the radio unit and park your car well.

3.Before connecting, please make sure the ignition is off to avoid short circuit and connect the yellow and res cable at last.

 

2004-2011 KIA Picanto Radio installation

1)Pry off the trim panel with a pry tool.

2004-2011 KIA Picanto Radio installation step 1

2004-2011 KIA Picanto Radio installation step 1

2)Remove the trim panel and disconnect cables at the back of it.

2004-2011 KIA Picanto Radio installation step 2

2004-2011 KIA Picanto Radio installation step 2

3)Remove 4 screws holding the unit with a Phillips screwdriver.

2004-2011 KIA Picanto Radio installation step 3

2004-2011 KIA Picanto Radio installation step 3

4)Gently take out factory radio.

2004-2011 KIA Picanto Radio installation step 4

2004-2011 KIA Picanto Radio installation step 4

5)Then disconnect cables at back of the radio.

2004-2011 KIA Picanto Radio installation step 5

2004-2011 KIA Picanto Radio installation step 5

6)Connect the cables on the new head unit as the user manual shows and place them well.

7)Put the new head unit into the dash.

8)Turn on the new head unit and have a comprehensive check if it works well.

9)Install 4 screws back to their original position.

10)Check whether the unit is working without problem.

11)If everything is OK, firm removed screws that are put aside, then make trim panel back on your new Seicane radio.

 

By the way, you should make sure whether the aftermarket radio fits your car before installation, and here is a good aftermarket radio of Seicane which fits KIA Picanto well:

http://www.seicane.com/seicane-s127678-all-in-one-android-4-4-4-2007-2011-kia-picanto-radio-gps-cd-dvd-player-auto-av-system-800-480-touch-screen-bluetooth-wifi-3g-mirror-link-obd2-steering-wheel-control

 

This Seicane KIA Picanto Radio can be a good choice for you. It has intelligent pure android 4.4.4 operation system and 6.2 inch HD 800*480 multi-touch screen.

You can perform Google search on the road with quick search box, play online games, watch videos, download online data and check emails by connecting to any WiFi hotspot in range or 3g internet, download any applications in the android market for access to games, Skype, MSN, YouTube, twitter, E-Book, Gmail etc. And it’s your perfect road companion.

So, what are you waiting for? Let’s check great functions in new KIA Picanto Radio right now!

Car stereo after installation,gps nav system with bluetooth music of 2011 2012 KIA K2

Car stereo after installation,gps nav system with bluetooth music of 2011 2012 KIA K2

Maybe you can recognize the unit in above image because you went to shopping in car market and saw it before.You may need to install a new one at that time,but you are not clear which one to choose or don’t know how to install 2011 2012 KIA K2 GPS radio car stereo sound system.

Then don’t worry,for I will try to help you solve this problem.A stereo as the picture show is one specially for 2011 2012 KIA K2,because the trim panel of it is same to factory one’s.And you know that one car can install not only one dvd,and one dvd can also be installed in some cars.

Nowadays most cars have corresponding car stereos that fit each one,and principles of removal and installation are generally same.Whatever whether this unit is suitable for your car,you can also have a patient look at following installation instructions for KIA K2 GPS system that will benefit you a lot.

Here are 2 tips for you before I show you removal steps in order to avoid unnecessary damage or any danger to car or even people.Don’t be afraid,it’s ok in normal cases.

Precautions before installation:

Please make sure that you have finished all parking series and turn off your radio before you start up any work;To ensure security please remember to disconnect the negative battery cable

2011 2012 KIA K2 original radio removal and GPS radio installation:

1.Factory dashboard of KIA K2

Factory dashboard of KIA K2

Factory dashboard of KIA K2

2.Use a lever to pry upper trim panel,and you can use your hand to pry it after it is fastened

Use a lever to pry upper trim panel

Use a lever to pry upper trim panel

you can use your hand to pry it after it is fastened

you can use your hand to pry it after it is fastened

3.After all parts are fastened,you can remove it totally

Remove trim panel totally

Remove trim panel totally

4.Use a pry tool to lever dashboard around and then remove it by disconnecting cable

Use a pry tool to lever dashboard around

Use a pry tool to lever dashboard around

remove it by disconnecting cable

remove it by disconnecting cable

5.Remove four screws that fixed the radio with a screwdriver

Remove four screws that fixed the radio

Remove four screws that fixed the radio

6.Then you can get out radio easily and disconnect cables at back of it

get out radio

get out radio

disconnect cables at back of it

disconnect cables at back of it

7.Make connection between new radio’s cables and car’s

Make connection between new radio's cables and car's

Make connection between new radio’s cables and car’s

8.Release this prat of rubber as the picture show

Release this prat of rubber

Release this prat of rubber

9.Get down screws that lay on two sides and use a knife to pry lower place of it

Get down screws that lay on two sides

Get down screws that lay on two sides

use a knife to pry lower place of it

use a knife to pry lower place of it

10.Put cables in the space after those two steel are taken out

Put cables in the space after those two steel are taken out

Put cables in the space after those two steel are taken out

11.Connect cables between new dvd and car system,fix screws back to it,then put it well in

Connect cables between new dvd and car system

Connect cables between new dvd and car system

fix screws back to it

fix screws back to it

12.Install trim panel back to your car

Install trim panel back to your car

Install trim panel back to your car

After general read for above 12 specific steps and operate according it,you can turn on your installed dvd player and check whether your installation is all right.

For more specific information,you can visit some related websites,for example: http://www.seicane.com/7-inch-2011-2012-kia-k2-touch-screen-gps-dvd-player-auto-a-v-radio-rds-bluetooth-music-wifi-rearview-camera-aux-dvr-steering-wheel-control-ipod-hd-1080p-c106 . If you meet some tricky problems that you have no experience,you’d better ask a professional man to help you deal with them.

Precautions after installation:

1.Please do not use strong chemicals or detergent wash the machine,if you need to make a tidy,you can use a clean and dried cloth

2.You can use your hand or the touch screen pen to operate new radio, without using other sharp objects, or it will cause damage to screen

3.Please keep well the removed things for usage again during later process

 

Head unit after replacement,aftermarket gps radio with sat nav system touch screen of 2009 KIA Sportage.Have a careful look at trim pane of it and then your factory radio’s,for most of you may haven’t changed the stereo for your car.

Head unit after replacement,aftermarket gps radio with sat nav system touch screen of 2009 KIA Sportage

Head unit after replacement,aftermarket gps radio with sat nav system touch screen of 2009 KIA Sportage

Knowing the installation guide for 2009 KIA Sportage aftermarket sat nav system clearly is very necessary if you are willing to install one by yourself,in fact there are a lot of people make such a choice.

We can find that people nowadays are more likely to seek for entertainments from usual life.Though most of the time we are rushing for life but we also should learn to enjoy it.More and more people choose to buy a new car because it will bring them much entertainments and convenience.If you have a KIA Sportage in 2009,this article is just for you.

To be honest,you can of course ask a professional worker to do it,however it’s not difficult to achieve though you are not professional only if you can make adequate preparations for it and be careful enough.But simple doesn’t mean we can do as what we want without obeying any rules,here are some attentions for you.

Precautions about installation and this new unit:

Make sure that you have finished all parking series to ensure security.When the car is operated at very fast speed for a long time or when you feel the temperature is very high you need to pay more attention to your new radio,new unit may enter heat protection mode at this time.If you have made up your mind to install a new unit,you can have a patient look at the following instructions and then operate the machine step by step.

2009 KIA Sportage factory audio removal:

1.Use a hard lever pry dashboard’s  downer part,and you should try several places of it to fasten it totally

Use a hard lever pry dashboard's  downer part

Use a hard lever pry dashboard’s downer part

2.Then you can take out dashboard easily

take out dashboard

take out dashboard

3.We can find that there are cables connected the dashboard,so we need to unplug the cables.Some of them may be very tight,you can unplug it with a lever

disconnect the cables

disconnect the cables

unplug tight cable with a lever

unplug tight cable with a lever

4.Take four screws out with a screwdriver

Take this screw and the other corresponding one out with a screwdriver

Take this screw and the other corresponding one out with a screwdriver

Take this lower screw and the other corresponding one out with a screwdriver

Take this lower screw and the other corresponding one out with a screwdriver

5.After that you can get original radio out

get original radio out

get original radio out

6.Unplug cables behind the radio

Unplug cables behind the radio

Unplug cables behind the radio

Removal affairs has been finished,next we will go on learning how to install KIA Sportage aftermarket sat nav system.In fact it’s easier than front process only if you can do a good cables connection.

2009 KIA Sportage aftermarket stereo installation:

7.Plug those cables correctly to sockets of new radio and then set it into place just for it

8.Firm four screws to original positions and cover dashboard to it

I have confidence in you that nothing will impede you from achieving this goal after scanning these specific introduction patiently.I guess there are still some people who are not very familiar with new installed unit,then I suggest you to visit next website to gain detailed knowledge about it:http://www.seicane.com/2009-kia-sportage-multimedia-dvd-receiver-with-7-motorized-touchscreen-3g-wifi-ipod-input-support-gps-bt-radio-tuner-3-zone-pop-c023-1.

If you can provide your car gps dvd with good mount and maintain,it will surely make your usual life more richful.I hold that it can ensure your radio’s longer usage if you can install the unit according to correct steps.And when you meet some problems that really troubles you,then you’d better ask someone who knows better to have a check,you are not professional after all.