First shows you a great 2007-2011 NISSAN SENTRA car stereo from Seicane, which is loaded with many practical features and high configurations. It looks amazing, doesn’t it?
2007-2011 NISSAN SENTRA car stereo after installation
To install such an excellent car stereo in your car is actually not a very complicated thing. If you have some related installation guide and a correct installation guide, you can also achieve the installation on your own. This article shares the detailed 2007-2011 NISSAN SENTRA car stereo installation guide with you. If you have the same dashboard as the above, you can take it as a reference.
Precautions:
- Please apply the parking brake before the installation.
- For your safety, please disconnect the negative cable on the vehicle battery.
- Please prepare a lever and a screwdriver for the installation.
2007-2011 NISSAN SENTRA car stereo installation guide
Step 1:
Use a screwdriver to remove two screws above the Nissan Frontier radio.
2007-2011 NISSAN SENTRA car stereo installation step 1
Step 2: Remove the trim panel.
Please wedge a flat tip screwdriver under the trim panel and pry up on it to remove the trim panel. To protect the trim from being accidentally scratched, you can use a clean rag while prying up on the trim panel.
2007-2011 NISSAN SENTRA car stereo installation step 2
Step 3: Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel.
2007-2011 NISSAN SENTRA car stereo installation step 3
Step 4: Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio.
2007-2011 NISSAN SENTRA car stereo installation step 4
Step 5: Connect the antenna in the back of the new Seicane car stereo and plug the electrical plugs running to the back of the car stereo. If you have any question on how to connect the antenna to new car stereo, please take the user manual as a reference or turn to the dealer for a wiring diagram.
Step 6: Turn on the new Seicane car stereo to have a careful check if it works well with your car. If it doesn’t, please check whether all the cables are connected correctly.
Step 7: After the test, please put the new Seicane car stereo into the dash.
Step 8: Install all the screws and the trim panel into their original place.
That’s all the installation guide for a 2007-2011 NISSAN SENTRA car stereo. Wish it can be helpful for you. If you have any questions, you can turn to your dealer or a professional for help. Please make sure you are clear about every step before the installation. If you are a green hand on the installation, it’s strongly suggested you have it installed by a professional.
What’s more, you need to make sure you have a right car stereo for your car, so that it can work well and be seamlessly installed in your car. If you don’t have one, I’d like to recommend an excellent 2007-2011 NISSAN SENTRA car stereo from Seicane to you. It comes with many up-to-date features for you to upgrade your factory radio. Here’s the link:
A variety of practical and entertainment features are built in this superior NISSAN SENTRA car stereo for you to replace your factory radio. With the latest GPS navigation system, you can get the route planning, accurate guidance and voice prompts to reach your destination. By wirelessly connecting with your enabled mobile phone via Bluetooth feature to get hands-free calls and music streaming, you can keep yourself and your passengers safe and pleasant on all trips.
Hopefully you like this fantastic NISSAN SENTRA car stereo and enjoy your brand new driving experience. Good luck to you!
Recent Comments