You must be pleased with the functional car DVD player navigation when driver wherever you want, but have you ever think about what to do if the GPS navigation has a problem during your journey? And how to solve that problem quickly and get out of that trouble as sooner as you can? The following passage is about how to solve that kind of problem for Audi A3 when it happened to you, view it and you may find something that useful to you.

First, the car DVD player naviagtion can not receive signal from satellite and unavailable to positioning.

Solution:

1. Check whether the GPS antenna with the TV antenna installed in the opposite place, install the the antenna will solve the problem;

2. The map satellite research port and Potter filter is can not match, you need to change the map collection star port and Potter filter.

3. The machine failure, use the multimeter to measure the GPS output whether it has voltage of 3.3 volts; if there the answer is no, then the machine need to be returned to the factory;

4. GPS antenna damage; replace GPS satellite antenna.

Second, the device can not paly TV.

Solution:

1. Check whether the GPS antenna with the TV antenna installed in the opposite place, install the the antenna will solve the problem;

2. Whether the television antenna installation location is not good, do not receive the TV effect, install the TV antenna in the place where the signal is good;

3. If no local television signal coverage area, call the after sales service telephone or log on the dealer’s website.

Third, can not read card.

Solution:

1. Check whether the data card is damaged; the card is inserted in the computer to judge whether the damage, if it was damaged please contact the dealer for replacement;

2. The information of the card is lost, please call the after sales srevice telephone or log on the dearler’s website.

3. Don’t read in the corresponding function, such as: the film is unable to read the music interface

Fourth, Can not find the navigation software can not enter the navigation

Solution:

1. If there is no map setting path, reset the navigation path;

2. Map card data loss, copy the new data map again

3. If the machine does not read card; please call the after sales srevice telephone or log on the dearler’s website.

Fifth, the car DVD player navigation system can not read USB.

Solution:

1. Check whether the U disk was damaged, if yes, then replace the new U disc

2. The USB interface is damaged; contact the dealer or depot repair

3. Whether or not in the corresponding function which read. Please call 400 telephone

Sixth, no reflect when touch the screen.

Solution:

The machine surface frame pressure too tight when installing, causing pressure to re install screen phenomenon;

 

Seventh, the screen touch is not precise.

Solution:

Touch screen has a problem; please call 400 hair touch-screen calibration software

Eighth, can not start the system.

Solution:

1. When installing machine power fuse machine to replace the fuse burned;

2. The power supply wiring harness with the original vehicle does not match; please according to the output circuit of the re wiring machine;

3. Anything wrong with the machine; please contact the dealer or depot repair.

Ninth, The main interface of the boot.

Solution:

Machine lost contact 400 software update software;

Tenth, no sound when play music in the fromat of MTV.

Solution:

The machine card inside the MTV data using the wrong; contact the dealer to replace.

More detailed information about the car DVD player itself you can view the following video and visit the website: www.seicane.com . 

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Post Navigation