Car Dvd Player Toyota | car dvd blog

06Jan 2016

How to remove and install a 2013 2014 Toyota LEVIN Radio

Nowadays, more and more people choose 2013 2014 Toyota LEVIN. Some of you may be the owners of Toyota LEVIN. To be honest, its original radio has few functions. If you want to watch HD video, make phone call or listen to music via bluetooth, use the navigation function. You should remove the original radio and install a new aftermarket radio instead. You might have no idea how to upgrade the original radio. Don’t worry, I’ll share some professional experience with you.

This image is the Seicane Toyota LEVIN Radio after installation. If you have the same dashboard with it, you can follow the steps below.

2013 2014 Toyota LEVIN after installation

2013 2014 Toyota LEVIN Radio removal

1·First remove the negative cable from the battery.

2·Then return to the inside of the Toyota Coralla, pry off the vent panel with a plastic tool and pull it out.

2013 2014 Toyota LEVIN Radio removal step 1

3·Set the vent panel aside and pry down the trim panel as the picture shows, then disconnect one side harness of the trim panel.

2013 2014 Toyota LEVIN Radio removal step 2

4·You can see two 10mm bolts in the position as the picture shows, remove them. And do the same in left side.

2013 2014 Toyota LEVIN Radio removal step 3

5·Pull out the radio slowly and watch out the harnesses behind it.

2013 2014 Toyota LEVIN Radio removal step 4

6·Finally disconnect harnesses behind the original radio.

2013 2014 Toyota LEVIN Radio removal step 5

Before the original radio removal, I’d like to share a good unit with you:

http://www.seicane.com/10-2-inch-android-touch-screen-radio-bluetooth-gps-navigation-system-for-2013-2014-toyota-levin-support-tpms-dvr-obd-ii-usb-sd-3g-wifi-rear-camera-steering-wheel-control-hd-1080p-video-aux-s082701

If you don’t know which unit is better, this one can be a good choice for you. It has intelligent pure android 4.2.2 operation system and 10.2 inch HD 1024*600 multi-touch screen and supports dual-screen display for the highest resolution of 2048*1536.

You can perform Google search on the road with quick search box, play online games, watch videos, download online data and check emails by connecting to any WiFi hotspot in range or 3g internet, download any applications in the android market for access to games, Skype, MSN, YouTube, twitter, E-Book, Gmail etc. And it is your perfect road companion.

2013 2014 Toyota LEVIN Radio installation

1·Make antennas and cables connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect whole procedure.

2·Connect the new Toyota LEVIN Radio to your Toyota Corolla, you should check your connections, the new unit’s position, and you’d better have a tidy for the cables.

3·Check whether the unit is working properly.

4·If everything is OK, firm four removed bolts that are put aside, then make trim panel back on your new unit.

Wish you can learn something from this eassy.

05Jan 2016

How to install a 2007 2008-2014 Toyota Land Cruiser 200 Radio

eric ⋅ Leave a Comment

If you are owners of 2007-2014 Toyota Land Cruiser 200, you need to know removal guide for 2007-2014 Toyota Land Cruiser 200 Radio.Many people invite the professional workers when they install the head unit, but most people do it by themselves. Let’s have a look at the new unit stereo radio of 2007-2014 Toyota Land Cruiser 200 first.

2007-2014 Toyota Land Cruiser 200 Radio

If you are not satisfied with your car’s recent radio, you can take the following advice as references.In fact,all the car DVD players are substantially identical but with minor differences. Therefore knowing how to remove 2007-2014 Toyota Land Cruiser Radio means that you can install car dvd player by yourself.Before discussing the installation, I will give you some advices about safety first.

When we are using the car DVD player, safety is the most important thing.Please do not stare at car DVD while driving, as it can disturb your attention.In addition, do not splash liquid on the unit for getting high playing quality.

The following are the removal steps for car’s head unit.

1.Take out the two blots that distributed on both sides of handbrake

2007-2014 Toyota Land Cruiser 200 Radio installation step 1

2.Remove screws by your hand

2007-2014 Toyota Land Cruiser 200 Radio installation step 2

3.After the bolts are removed,take out the left and right loosed dashboard

2007-2014 Toyota Land Cruiser 200 Radio installation step 3

4.Disconnect the cable between them

2007-2014 Toyota Land Cruiser 200 Radio installation step 4

5.Get out the screw by using your hand

2007-2014 Toyota Land Cruiser 200 Radio installation step 5

6.Remove five screws as the picture show

2007-2014 Toyota Land Cruiser 200 Radio installation step 6

7.Pull off the CD player

2007-2014 Toyota Land Cruiser 200 Radio installation step 7

8.Disconnect the cables between them Gently

2007-2014 Toyota Land Cruiser 200 Radio installation step 8

9.Connect the cables on the new head unit as the user manual shows and place them well.

10.Put the new head unit into the dash.

11.Turn on the new head unit and have a comprehensive check if it works well.

12.Install 4 screws back to their original position.

13.Check whether the unit is working without problem.

14.If everything is OK, make trim panel back on your new Seicane radio.

There are some details to mind during the following steps: you should slide the unit into the dash then connect the negative cable to the original wiring harness.Please remember that the wires should be connected correctly and the same to battery installation.

After your installation of Toyota Land Cruiser 200 Radio turn on the new unit and operate it as the user instruction said.Check out all the functions in the unit and see whether everything works well or not. If it doesn’t, check the wires connections again or contact the technicians from the dealer for help.

Through the detailed description,I hold that you have mainly grasped how to remove original CD player of the car.For more information,please visit:

http://www.seicane.com/9-inch-android-radio-for-2007-2014-toyota-land-cruiser-200-with-3g-wifi-bluetooth-gps-navigation-system-capacitive-touch-screen-built-in-dvd-tpms-dvr-obd-ii-rear-camera-aux-headrest-monitor-control-usb-sd-video-s082693

If you still have any problem on it,ask someone who works in this field for help.You will get a pleasant installation journey and you will find how convinent and perfect when the GPS Navigation System comes in your car.

18May 2015

How to upgrade 2011 2012 Toyota Avalon radio stereo head unit

jeen ⋅ Leave a Comment

stereo autoradio after replacement,gps dvd radio bluetooth with sat nav system of 2011 2012 Toyota Avalon

This is car stereo autoradio after replacement,gps dvd radio bluetooth with sat nav system of 2011 2012 Toyota Avalon.

If your car is one of 2011 2012 Toyota Avalon then this unit matches your car.Seeing the space after head unit removal is whether right for new unit is the main way to figure this question.

After you are sure that this head unit is suitable for your car and decide to upgrade to a new one by yourself,then it’s right to read this essay which will show you how to upgrade 2011 2012 Toyota Avalon radio stereo head unit.Of course you can surely ask a professional man to achieve it if you are too busy.

But it also doesn’t matter if it seems to be improper for your car,for there are some places for stereo upgrade are common,it means that you can also learn a lot from the following instructions which is about Toyota Avalon radio upgrade ,and probably you can give some advices to your friend when he needed.

Attention: Installing an aftermarket car stereo can be a self-done thing doesn’t mean that you can do it without taking care of any notes.There are some tips for you before you begin any work.

Precautions before installation:

1.It may cause injury to driver and passengers if you stop your car very suddenly

2.Please make sure that the rear space is enough before opening the hole from faceplate in the dashboard panel.Be careful,do not damage the fuel cable,brake cable,electrical components,power lines or cable communications

3.Please ensure that they are not contact with any electrification down-lead when use the screws.Vibration may damage wire or insulation skin and lead to a short circuit or other damage to the vehicle

2011 2012 Toyota Avalon original radio removal and aftermarket radio installation:

1.Original dashboard

Original dashboard

2.Get down gear shift panel

Get down gear shift panel

3.Make screws out as the picture show

Make screws out

4.Use a gentle removal tool to remove the lid of the surface

Use a gentle removal tool to remove the lid of the surface

5.Get down these two screws as the image show

Get down these two screws

6.Remove original stereo from car

Remove original stereo from car

7.Factory radio after removal

Factory radio after removal

Head unit removal is over here,and next work is new unit installation.Actually it can be easier if you can successfully complete the cable connection.

Please be careful when you are making cables connections,for you should make sure that you have connected all wirings correctly.I suggest you to check it again if you are not very sure about it to avoid once stereo removal again.Then you can install new radio into the space.

Turn on it and see if the this radio can work,then install other removed parts to their original places.This is the whole installation process.

If you meet some problems during this process,you can visit related websites to solve them,for example:http://www.seicane.com/8-inch-autoradio-dvd-car-audio-system-for-2011-2012-toyota-avalon-with-3d-gps-bluetooth-radio-rds-3g-wifi-tv-tuner-mp3-mp5-ipod-aux-hd-1080p-video-backup-camera-c270,which can probably help directly solve problems on this unit.

And if you want to find and make a comparison on stereos,then you can visit the following website:http://www.seicane.com ,where there are a lot of car dvd players there.

31Mar 2015

How to upgrade 2012 2013 Toyota Camry stereo autoradio

jeen ⋅ Leave a Comment

People are always seeking for more entertainments in daily busy life,we need to rush about for life but we also should learn to enjoy it,this is the real life we need.Many people choose to buy a car because it will bring them much convenience.Do you have a Toyota Camry?Next I will show you simple steps about how to upgrade 2012 2013 Toyota Camry stereo autoradio.There is an image for the head unit after installation,nav system of 2012 2013 Toyota Camry.

the unit after installation,radio gps of 2012 2013 Toyota Camry

Before I begin to show you the installation steps,there are some tips for you:please make sure that you have finished all the parking series to ensure security.In addition, when the car navigation system is operated at very fast speed for a long time,or the temperature is over 65 degrees,it will enter heat protection mode,this is what you really need to be careful. If you are interested in it,you may have a patient look at the following instructions and then get a general idea about it.

1.Pry the below dashboard with a lever

pry the below dashboard with a lever

2.Take out two screws with a screwdriver

take out two screws with a screwdriver

3.Remove two screws which beside the white ones

remove two screws which beside the white ones

4.Then you can loose the upper dashboard gently

loose the upper dashboard gently

5.Softly get out the CD player and disconnect all the cables

softly get out the CD player

disconnect all the cables

6.The head unit after removal

the head unit after removal

7.After the removal procedure,connect the cables of new unit to the right places,or you can take instructions as reference

8.Install upper dashboard and fasten four screws and make the below dashboard to its original position

Have you finished all these work for Toyota Camry stereo upgrade as these 8 steps show?We can find that it’s not difficult to remove the original CD player and replace a new one.Of course,there will still appear some small problems for different situations.At that time,thinking about the reason calmly or asking somebody who are professional in this part for help,nothing will not be solved only if you really decide to achieve it especially when you have prepared a lot for it.

It can a little dangerous if you take it too easy,easy doesn’t mean you can do it without any rules.Please mind one tip that safety should be placed at the first position,stop your action whenever you feel any danger,because you are not a professional person in this field after all,you may do some uncorrect things or didn’t attention some important things,these are all possible,therefore make adequate preparations for your Toyota Camry removal please and you can ask someone beside to help you .

You can also visit some related websites for some useful information,for example:http://www.seicane.com/8-inch-2012-2013-toyota-camry-aurion-eu-au-version-autoradio-dvd-player-tv-tuner-bluetooth-radio-rds-3g-wifi-pop-aux-backup-camera-hd-1080p-mp3-steering-wheel-control-c131,which will help you have a better understanding of new functions of Toyota Camry stereo radio.

30Mar 2015

Installation guide for 2001-2011 Toyota Corolla Hilux aftermarket sat nav system

jeen ⋅ Leave a Comment

This is DVD player after installation,gps nav syetem of 2001-2011 Toyota Corolla Hilux.

DVD player after installation,gps nav syetem of 2001-2011 Toyota Corolla Hilux

Before you replace your car’s original CD player,you need to make sure the information is exactly right.At first,you should know if this player is suitable for your car dashboard.After that,we begin to think about the question of installation guide for Toyota Corolla Hilux aftermarket sat nav system if you are the owner of this kind of car.

Before the showing of installation instructions,there are some detailed but important things that need to take into consider.Please do not stare at or even operate the car DVD while driving, as it can disturb your attention.When meeting high humidity atmosphere, such as raining days, it may not work properly as the humidity may gather on unit. In addition, do not splash liquid on the unit for getting high playing quality.

After attention for these things , turn off the radio before you shut down your car. The following are the removal steps for the head unit of the car.

1.Pry the below dashboard with a lever and disconnect the cable

pry the below dashboard with a lever

disconnect the cable

2.Take out the small middle cover and remove the screw

take out the small middle cover

remove the screw with a screwdriver

3.Open the below cover and gently pull off it

open the below cover and gently pull off it

4.Pry the dashboard with a lever

pry the dashboard with a lever

5.Remove four screws with a screwdriver

remove four screws with a screwdriver

6.Lever the dashboard in certain places which seems obvious

lever the dashboard on the right side

lever the dashboard on the left side

7.After that you can take out the CD player slowly

take out the CD player slowly

8.Disconnect the cables between the CD player and the car

disconnect the cables between the CD player and the car

With above specific introduction for how to remove and the help of some other information, it won’t be a hard thing to continue the remaining actions for the whole installation of the Toyota Corolla Hilux gps radio.

To make sure that your radio nav system can be used longer,you’d better install the unit according to correct steps.With good mount and maintance, surely it will make your usual life more pleasant.If you meet some problems that can’t solve by yourself,you can visit websites,for example:http://www.seicane.com/2001-2011-toyota-corolla-hilux-zelas-previa-vios-prado-matrix-land-cruiser-fj-multimedia-radio-gps-system-bluetooth-tv-tuner-3g-wifi-aux-dvr-steering-wheel-control-1080p-c071,it or the workers of the market will provide you good solutions.

Attention:

The car will enter heat protection mode if the car navigation system is operated extremely,such as operated with very fast speed for a long time,or the temperature is over 65 degrees.It is normal so you really need to be careful of it.

28Mar 2015

How to remove 2011 2012 Toyota Avalon aftermarket stereo autoradio

jeen ⋅ Leave a Comment

Are you a owner of Toyota Avalon?And are you familiar with below image?

new unit after installation,gps nav system of 2011 2012 Toyota Avalon

Is it easy to remove an original radio of Toyota Avalon and replace a more advanced one?The whole process may only take about half an hour, but this’s to professional car stereo removal staffs. If you are willing to remove the unit by yourself, you’d better ask a professional people for help to make sure what you did is correct.Actually the question of how to remove 2011 2012 Toyota Avalon aftermarket stereo autoradio should pay more attention to the old radio removal. You should refer to the installation guide from the dealer and then connect the wires of the new Toyota Avalon radio stereo correctly. Or, the new unit cannot work well in your car.

The following are the installation steps for the head unit of 2011 2012 Toyota Avalon. Before you begin the removal please apply the parking brake and remove the negative cable on the vehicle battery to ensure security. You can prepare tools for the mount, too. You may need a screwdriver, a lever and so on.

1.The original CD player

the original CD player

2.Get out the gear shift panel

get out the gear shift panel

3.Remove screws with a screwdriver as the picture show

remove screws with a screwdriver as the picture show

4.Remove the air-conditioner panel with a soft lever

remove the the air-conditioner panel with a soft lever

5.Take out two screws with a screwdriver as the image show

take out two screws with a screwdriver as the image show

6.Remove the original head unit

remove the original head unit

7.The original car radio after removal

the original car radio after removal

After you have finished removing staffs,you can check it whether is the same with this above one.

This is the removal process of 2011 2012 Toyota Avalon autoradio, have you made it clear?

When you start up to remove the original one, please according to the installation instruction from the dealer if you have it. Connect the new unit antennas to right positions. After that, slide the unit into the dash then connect the negative cable to the original wiring harness as the instruction shows. Notice the wires should be connected correctly and the same to battery installment. Turn on the new unit and operate it as the user instruction for users requires. Check out all the functions in the unit and see if everything works well. If it doesn’t, check the wires connections again or contact the technicians from the dealer for help.

This article is about the removal of 2011 2012 Toyota Avalon aftermarket stereo autoradio,it will only show you how to remove your CD player.If you want to know more about installation for it, you can visit some related websites for example:http://www.seicane.com/8-inch-autoradio-dvd-car-audio-system-for-2011-2012-toyota-avalon-with-3d-gps-bluetooth-radio-rds-3g-wifi-tv-tuner-mp3-mp5-ipod-aux-hd-1080p-video-backup-camera-c270,which will teach you installing the dvd player.

Category Archives: Car Dvd Player Toyota

How to remove and install a 2013 2014 Toyota LEVIN Radio

2013 2014 Toyota LEVIN Radio removal

2013 2014 Toyota LEVIN Radio installation

How to install a 2007 2008-2014 Toyota Land Cruiser 200 Radio

How to upgrade 2011 2012 Toyota Avalon radio stereo head unit

How to upgrade 2012 2013 Toyota Camry stereo autoradio

Installation guide for 2001-2011 Toyota Corolla Hilux aftermarket sat nav system

How to remove 2011 2012 Toyota Avalon aftermarket stereo autoradio

Recent Posts

Views

Recent Comments

Archives

Subscribe

Categories

Meta