With rapid development of technology,cars have become a normal family transportation in modern society,and SsangYong Kyron is also a very popular one.So what do you think of a car stereo?
In fact car audio stereo should be a very necessary part to car except its driving part.Therefore more and more drivers are willing to replace their original stereo with a new one.Today I will show you how to upgrade 2006-2012 SsangYong Kyron audio to gps dvd support External DVR with 3G WiFi Backup Camera.Firstly,let’s have a look at following picture:new unit after installation,audio stereo gps dvd with backup camera of 2006-2012 SsangYong Kyron.
Please don’t take it as a abnormal unit,however this SsangYong Kyron audio belongs to normal category,so it can be installed in not only this kind of car,but also many other car series, you have no need to worry about it.If even it still not match your car,you can also benefit a lot from here for their main principles are same.
Some of you may still have some problems about this head unit,for you don’t know exactly about it thus haven’t decided whether to upgrade the car stereo or need to know more details,here is a website that can help you get a clearer understanding or provide you some useful solutions during the following installation: http://www.seicane.com/7-inch-autoradio-dvd-aftermarket-navigation-for-ssangyong-kyron-support-external-dvr-with-gps-3g-wifi-backup-camera-bluetooth-music-c158-1.
There is a note for you that following steps are normal steps for removing a original stereo.We know that many operations of them are similar,thus you can also get information you need from the next procedure showing part.
2006-2012 SsangYong Kyron original sound system removal:
1.Lever trim panel in downer place and remove it with a lever,the same to right side one
2.You will find four holes behind removed panels if you look very closely ,make four removal tools inserted into four holes
3.Remove factory stereo by pulling these four tools
4.Unplug cables at the back of radio
5.Prize higher small trim panels with a pry tool,and remove them like step one
6.Make removal tools plugged into four higher holes
7.Pull out them and take out original radio
8.Disconnect antennas and cables behind the radio
During this process you will find that there are screws which is used to fix stereo to the car.But you don’t know how to deal with them.Because this is only a normal example of removing car radio,not special for your car installation.Thus it’s possible for you to find some difference.
Next is the general procedure of SsangYong Kyron original audio system removal: pry trim panel to remove it with a pry tool, or another circumstance which has shown in front part.You may need to remove several panels.After that,you may need to remove screws which stop you removing original unit,remove them like the following picture show:
Then you can remove the CD player easily and before you can totally remove it you should disconnect cables behind it first.
2006-2012 SsangYong Kyron new audio installation:
1.Correctly connecting antennas between new unit with car connectors is the first and also most important thing.If you have no idea of it,you can carefully read installation instructions or ask someone who are good at it
2.After you are sure that your connection is all right,you can install new radio into its space and make removed screws to firm it
3.Turn on installed head unit and have a check for new machine.If everything is ok,then reinstall panels back on their primary places
Recent Comments