Category Archives: Car Dvd Toyota

Toyota Land Cruiser 200 head unit after installation

Are you desired to install a multifunctional head unit in your car to enjoy more features while you are driving your beloved car to your desired destination? If you say yes, then this article is worth your reading. Please look at the image below, which is an intelligent Toyota Land Cruiser 200 head unit from Seicane, if you exactly have the same dashboard, then you can read this article carefully to help with the installation.

Toyota Land Cruiser 200 head unit after installation

Toyota Land Cruiser 200 head unit after installation

 

 

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

 

 

Toyota Land Cruiser 200 head unit installation guide

1.Take out the two blots that distributed on both sides of handbrake.

1.Take out the two blots that distributed on both sides of handbrake

1.Take out the two blots that distributed on both sides of handbrake

 

2.Remove screws with your hand.

2.Remove screws with your hand

2.Remove screws with your hand

 

3.After the bolts are removed, take out the left and right loosed dashboard.

3.After the bolts are removed, take out the left and right loosed dashboard

3.After the bolts are removed, take out the left and right loosed dashboard

 

4.Disconnect the cable between them.

4.Disconnect the cable between them

4.Disconnect the cable between them

 

5.Get out the screw with your hands.

5.Get out the screw with your hands

5.Get out the screw with your hands

 

6.Remove five screws as the picture show.

6.Remove five screws as the picture show

6.Remove five screws as the picture show

 

7.Pull the original radio out of the dashboard.

7.Pull the original radio out of the dashboard

7.Pull the original radio out of the dashboard

 

8.Disconnect the connectors at the back of the original radio.

8.Disconnect the connectors at the back of the original radio

8.Disconnect the connectors at the back of the original radio

 

9.Connect the cables on the new Seicane unit as the user manual shows and place them well.

10.Put the new Seicane unit into the dash.

11.Turn on the new Seicane unit and have a comprehensive check if it works well.

12.Install 4 screws back to their original position.

13.Check whether the unit is working without problem.

14.If everything is OK, make trim panel back on your new Seicane unit.

Wish the above installation guide can be helpful for you. If you find it too hard for you to understand all the steps, you’d better ask a professional to help you. If there is any further question, you can consult your dealer. Besides, if you don’t have a n ideal unit for you car, I’d like to recommend a wonderful Toyota Land Cruiser 200 head unit from Seicane to you, please click for more details:

 

http://www.seicane.com/9-inch-android-4-4-touch-screen-radio-bluetooth-gps-navigation-system-for-toyota-land-cruiser-200-with-tpms-dvr-obd-ii-usb-sd-3g-wifi-rear-camera-steering-wheel-control-hd-1080p-video-aux-s082694

 

This modern Toyota Land Cruiser 200 head unit comes with a great GPS navigation system for you to get to your desired destination. The lane assist, 3D street view, landmark display, route planning, text-to-speech guidance are all provided for you to find your way to any unfamiliar location with ease. Besides, you can relax yourself and your passengers with a great deal of multimedia playback supported. By easily pairing with your enabled mobile phone, you can have  hands-free calls and stream music to get access to safety and pleasure on all your trips.

 

Just have an exciting driving experience with this Toyota Land Cruiser 200 head unit on all your trips. Wish you a wonderful trip all the time!

 

2009-2013 Toyota VENZA car stereo after installation

Do you want to put your car into an amazing entertainment paradise? If you say yes, then you can simply upgrade your factory radio into a new multifunctional car stereo which is usually integrated with the latest GPS navigation system and a powerful DVD player. To help you better upgrade your factory radio, I’ d like to share a step-by-step 2009-2013 Toyota VENZA car stereo installation guide with you. Please look at the picture, it’s a multifunctional Toyota VENZA car stereo from Seicane, if you have the same dashboard, then this article can do great help to you.

2009-2013 Toyota VENZA car stereo after installation

2009-2013 Toyota VENZA car stereo after installation

 

 

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

 

2009-2013 Toyota VENZA car stereo installation guide

  1. Remove the plastic panel with a lever.

    1. Remove the plastic panel with a lever

    1. Remove the plastic panel with a lever

 

  1. Unscrew the screws holding the a/c control with a screwdriver.

    2. Unscrew the screws holding the ac control with a screwdriver

    2. Unscrew the screws holding the ac control with a screwdriver

 

  1. Take the a/c control out of the dash.

    3. Take the ac control out of the dash

    3. Take the ac control out of the dash

 

  1. Disconnect the connectors at the rear of the a/c control.

    4. Disconnect the connectors at the rear of the ac control

    4. Disconnect the connectors at the rear of the ac control

 

  1. Remove all the screws holding the factory radio with a screwdriver.

    5. Remove all the screws holding the factory radio with a screwdriver

    5. Remove all the screws holding the factory radio with a screwdriver

 

  1. Gently take the factory radio out of the dash.

    6. Gently take the factory radio out of the dash

    6. Gently take the factory radio out of the dash

 

  1. Unplug all the connectors at the back of the factory radio.

    7. Unplug all the connectors at the back of the factory radio

    7. Unplug all the connectors at the back of the factory radio

 

  1. Make antennas and cables connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect whole procedure.
  2. Put the new Seicane stereo into your dashboard, you should check whether your connections are correct, the new radio is in right position, and you’d better have a tidy for the cables.
  3. Check whether the new Seicane stereo is working without problem.
  4. If there is no problem, firm removed screws and bolts that are put aside, then make trim panel back on your new Seicane stereo.

 

Can you install your new stereo with this installation guide now? If you have any problems during the whole process of the installation, you can turn to your dealer or a professional for help. If it’s the first time for you to upgrade your radio, then you’d better have it installed by a professional.

 

Besides, you need to have a suitable stereo for your car. If you don’t have one, I’ d like to recommend a wonderful 2009-2013 Toyota VENZA car stereo from Seicane to you, please click:

 

http://www.seicane.com/8-inch-2009-2013-toyota-venza-android-radio-gps-navigation-system-with-3g-wifi-capacitive-touch-screen-tpms-dvr-obd-ii-rear-camera-aux-steering-wheel-control-usb-sd-bluetooth-hd-1080p-video-s082716

 

This Toyota VENZA car stereo comes with a great performance featured with a lot of practical and entertainment functions including the 3D GPS navigation system, bluetooth technology, a DVD player, Ipod and USB connection, wifi, etc. You can easily sync with your compatible mobile phone to make and receive calls without taking your hands off the steering wheel control as well as stream music via the bluetooth connection.

2005-2009 Toyota Old REIZ head unit after installation

If you want to enjoy more convenience and enjoyment in your car, you can simply upgrade your factory radio with a new unit which can support a lot of up-to-date features to meet your different needs in your car. If you don’t know how to install the new unit, then you can read this 2005-2009 Toyota Old REIZ head unit installation guide carefully to help with the installation. The picture below is a wonderful Toyota Old REIZ head unit after installation from Seicane for your reference.

2005-2009 Toyota Old REIZ head unit after installation

2005-2009 Toyota Old REIZ head unit after installation

 

 

Some tips before the installation:

  1. Please disconnect the power before the installation.
  2. Please prepare a lever and a screwdriver before the removal and the installation.
  3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

 

2005-2009 Toyota Old REIZ head unit installation guide

1·Remove the original console panel with a lever, pry gently along the gap and pick up the panel. Then set it aside.

1. Remove the original console panel with a plastic knife

1. Remove the original console panel with a plastic knife

 

2·Remove the four screws that fixed the radio on the dashboard. Removing these screws will not be a difficult job.

2. Remove the four screws that fixed the radio on the dashboard

2. Remove the four screws that fixed the radio on the dashboard

 

3·Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

3. Pull the factory radio out of the dash

3. Pull the factory radio out of the dash

 

4·Unplug the connectors.

4. Unplug the connectors

4. Unplug the connectors

 

5·Remove the brackets on both sides of the factory radio. So far the removal of the factory radio is completed. Next steps will move on to the installation of the Seicane unit.

5. Remove the brackets on both sides of the factory radio

5. Remove the brackets on both sides of the factory radio

 

6·Install the brackets on both sides of the Seicane unit.

 

7·Dock the connectors of the original vehicle and the upgraded car audio.

7. Dock the connectors of the original vehicle and the upgraded car stereo

7. Dock the connectors of the original vehicle and the upgraded car stereo

 

8·Insert the wires to the appropriate location of the upgraded head unit. If you are not sure about how to wire correctly, you may refer to the wiring diagram for details.

 

9·Fix the Seicane unit with the four screws.

9. Fix the Seicane unit with the four screws

9. Fix the Seicane unit with the four screws

 

10·Firm the console panel. Finally the new Seicane unit is installed and a comprehensive test should be conducted on the new unit.

10. Firm the console panel

10. Firm the console panel

 

 

Now you probably have a general idea about how to install your new unit in your car. If you have any questions during the installation, please don’t hesitate to ask your dealer or a professional for help. If it’s the first time for you to upgrade your factory radio, then you’d better ask a professional for help. If you are finding an ideal unit for your car, you can refer to the following 2005-2009 Toyota Old REIZ head unit from Seicane, please click:

 

http://www.seicane.com/9-inch-android-radio-for-2005-2009-toyota-old-rezi-with-3g-wifi-bluetooth-gps-navigation-system-capacitive-touch-screen-built-in-dvd-tpms-dvr-obd-ii-rear-camera-aux-headrest-monitor-control-usb-sd-video-s082713

 

With this modern Toyota Old REIZ head unit in your car, you can go anywhere without getting lost with the most accurate GPS navigation system. To simply pair with your enabled mobile phone, you can stay focused on your road ahead and keep your hands on the steering wheel control to make and receive phone calls to keep safer as well as stream music from your phone or other portable devices for fun.

2007-2015 Toyota ALPHARD car stereo after installation

To get to a lot of locations without getting lost and with ease, a powerful car stereo integrated with GPS navigation function and entertainment features can easily help you with that. No matter you are going to upgrade some features in your factory radio or just totally replace it, a detailed removal and installation guide can be helpful for you. The following instruction is about a 2007-2015 Toyota ALPHARD car stereo from Seicane, if you have the same dashboard, you can also take it as a reference.

2007-2015 Toyota ALPHARD car stereo after installation

2007-2015 Toyota ALPHARD car stereo after installation

 

 

Some tips before the installation:

  1. Please disconnect the power before the installation.
  2. Please prepare a lever and a screwdriver before the removal and the installation.
  3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

 

 

2007-2015 Toyota ALPHARD car stereo installation guide

1·Remove the original console panel with a plastic knife, pry gently along the gap and pick up the panel. Then set it aside.

2007-2015 Toyota ALPHARD car stereo installation step 1

2007-2015 Toyota ALPHARD car stereo installation step 1

 

2·Remove the four screws that fixed the radio on the dashboard. Remove these screws will not be a difficult job.

2007-2015 Toyota ALPHARD car stereo installation step 2

2007-2015 Toyota ALPHARD car stereo installation step 2

 

3·Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

2007-2015 Toyota ALPHARD car stereo installation step 3

2007-2015 Toyota ALPHARD car stereo installation step 3

 

4·Unplug the connectors.

2007-2015 Toyota ALPHARD car stereo installation step 4

2007-2015 Toyota ALPHARD car stereo installation step 4

 

5·Remove the brackets on both sides of the factory radio. So far the removal of the factory radio is completed. Next steps will move to the installation of the Seicane car stereo.

2007-2015 Toyota ALPHARD car stereo installation step 5

2007-2015 Toyota ALPHARD car stereo installation step 5

 

6·Install the brackets on both sides of the Seicane car stereo.

7·Dock the connectors of the original vehicle and the upgraded car audio.

2007-2015 Toyota ALPHARD car stereo installation step 7

2007-2015 Toyota ALPHARD car stereo installation step 7

 

8·Insert the wires to the appropriate location of the upgraded car stereo. If you are not sure about how to wire correctly, you may refer to the wiring diagram for details.

 

9·Fix the Seicane car stereo with the four screws.

2007-2015 Toyota ALPHARD car stereo installation step 9

2007-2015 Toyota ALPHARD car stereo installation step 9

 

10·Firm the console panel. Finally the new Seicane stereo is installed and a comprehensive test should be conducted on the new radio.

2007-2015 Toyota ALPHARD car stereo installation step 10

2007-2015 Toyota ALPHARD car stereo installation step 10

 

If you have any questions about the removal and installation, you can ask your dealer or a professional for help. Wish the above installation guide can be helpful for you. If you are a green hand on the installation, please go to a car stereo upgrade center to install it.

 

In addition, it’ s necessary for you to ensure your new stereo can be suitable for your car. If you are still looking for an ideal stereo for your car, you can refer to the following link which is an amazing 2007-2015 Toyota ALPHARD car stereo from Seicane, please click:

 

http://www.seicane.com/9-inch-2007-2015-toyota-alphard-android-4-2-radio-gps-navigation-system-with-3g-wifi-capacitive-touch-screen-tpms-dvr-obd-ii-rear-camera-aux-steering-wheel-control-usb-sd-bluetooth-hd-1080p-video-s082711

 

With this Toyota ALPHARD car stereo in your car, you can enjoy the Bluetooth music streaming at the same time to keep relaxed during the driving. You won’t have any trouble in finding your way to your destination any more with the help of the text-to-speech guidance provided by its 3D precise GPS navigation system.

 

Just take this popular Toyota ALPHARD car stereo in your car and have a wonderful trip with it! Good luck to you!

If you are an owner of 2014 Toyota Prado and are going to upgrade your factory radio with a new aftermarket car stereo. Some of you may want to install it on your own. Maybe some of you have tried and failed. Here I’d like to share the correct installation instructions about a 2014 Toyota Prado car stereo with you. Please look at the below picture which is a Seicane 2014 Toyota Prado car stereo after installation. If you have the same dashboard, you can refer to the below installation guide.

2014 Toyota Prado car stereo after installation

2014 Toyota Prado car stereo after installation

 

 

Tips about the installation:

 

  1. Please disconnect the power before the installation.
  2. Please prepare a lever and a screwdriver before the removal and the installation.
  3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

 

2014 Toyota Prado car stereo installation guide

1·Pull out the speed control with medium force by your hands.

2014 Toyota Prado car stereo installation  step 1

2014 Toyota Prado car stereo installation step 1

 

2·Unplug the harness behind the speed control, and set it aside.

2014 Toyota Prado car stereo installation  step 2

2014 Toyota Prado car stereo installation step 2

 

3·Unscrew four 10mm bolts holding the radio in place.

2014 Toyota Prado car stereo installation  step 3

2014 Toyota Prado car stereo installation step 3

 

4·When the screws are out, pull the radio out of the dash.

2014 Toyota Prado car stereo installation  step 4

2014 Toyota Prado car stereo installation step 4

 

5·Disconnecting the harnesses behind the factory radio.

2014 Toyota Prado car stereo installation  step 5

2014 Toyota Prado car stereo installation step 5

 

6·Make antennas and cables of the Seicane stereo connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect whole procedure.

7·Connect the new Seicane stereo to your Toyota PRADO, you should check your connections, the new unit’s position, and you’d better have a tidy for the cables.

8·Check whether the unit is working without problem.

9·When the radio is working properly, push the radio into place, firm four removed bolts that are put aside, then make panel back on your new Seicane stereo.

 

Wish the above installation guide can be helpful for you. If you have any questions, you can ask your dealer or a professional for help. If you think it hard to understand all the steps, you’d better go to a car stereo upgrade center to install it or ask a professional technician to help.

Besides, it’s important for you to confirm you have a right stereo for your car. Or a wrong stereo can’t be compatible with your car. If you are unsure about this, you can refer to the following link which is about a Toyota Prado car stereo from Seicane, please click:

 

http://www.seicane.com/seicane-s128001-8-inch-pure-android-sat-nav-car-multimedia-system-for-2014-toyota-prado-with-cd-dvd-player-bluetooth-am-fm-radio-mirror-link-obd2-3g-wifi-steering-wheel-control

 

Equipped with an Android 4.4.4 operating system and a RK3188 1.6 GHz Cortex A9 Quad-core CPU, this Toyota Prado car stereo of advanced configuration is easy to operate with a large 8 inch HD 1024*600 multi-touch screen. The Bluetooth technology to sync your mobile phone is included in it, so that you can enjoy hands-free calls and streaming audio. The USB wired connection and iPod availability greatly increase ways to relax and entertain.

 

Just get to your destination with this excellent Toyota Prado car stereo and have a great time with it!

 

Look at the picture below, it’s a Seicane 2007-2013 Toyota Land Cruiser 200 radio after installation. Do you have a similar or a same dashboard as it? If your answer is yes, then this article is helpful for you to install a new head unit in your car by yourself. To install a car stereo on your own, you can not only save quite a few money but also have a great sense of fulfillment. Wish you can get some help from the following detailed 2007-2013 Toyota Land Cruiser 200 radio installation guide.

 

2007-2013 Toyota Land Cruiser 200 radio after installation

2007-2013 Toyota Land Cruiser 200 radio after installation

 

Some precautions before the installation:

  1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
  2. A lever and a screwdriver need to be prepared before the installation.

 

2007-2013 Toyota Land Cruiser 200 radio installation instructions:

1.Remove the two blots off  both sides of handbrake.

2007-2013 Toyota Land Cruiser 200 radio installation step 1

2007-2013 Toyota Land Cruiser 200 radio installation step 1

 

2.Remove screws with your hand.

2007-2013 Toyota Land Cruiser 200 radio installation step 2

2007-2013 Toyota Land Cruiser 200 radio installation step 2

 

3.Remove left and right loosed panel after the bolts are taken off.

2007-2013 Toyota Land Cruiser 200 radio installation step 3

2007-2013 Toyota Land Cruiser 200 radio installation step 3

 

4.Make the cable between them disconnected.

2007-2013 Toyota Land Cruiser 200 radio installation step 4

2007-2013 Toyota Land Cruiser 200 radio installation step 4

 

5.Take the screw out with your hands.

2007-2013 Toyota Land Cruiser 200 radio installation step 5

2007-2013 Toyota Land Cruiser 200 radio installation step 5

 

6.Remove five screws out with a screwdriver as the pictures show.

Remove the first screw

2007-2013 Toyota Land Cruiser 200 radio installation step 6-1

2007-2013 Toyota Land Cruiser 200 radio installation step 6-1

 

Remove the second and third screws

2007-2013 Toyota Land Cruiser 200 radio installation step 6-2

2007-2013 Toyota Land Cruiser 200 radio installation step 6-2

 

Remove the fourth and fifth screws

2007-2013 Toyota Land Cruiser 200 radio installation step 6-3

2007-2013 Toyota Land Cruiser 200 radio installation step 6-3

 

7.Gently take the original radio out of the dash.

2007-2013 Toyota Land Cruiser 200 radio installation step 7

2007-2013 Toyota Land Cruiser 200 radio installation step 7

 

8.Gently unplug the harness at the back of the original radio.

2007-2013 Toyota Land Cruiser 200 radio installation step 8

2007-2013 Toyota Land Cruiser 200 radio installation step 8

 

  1. Plug the harness to the back of the new Seicane radio.
  2. Connect wires of the new Seicane radio as the user manual shows. You need to be very careful when you are doing this for it may affect the whole procedure. If you are not clear how to wire the cables, please refer to the wiring diagram.
  3. Turn on the new Seicane radio to check if everything works well.
  4. If everything is ok, put the new Seicane radio into the dash.
  5. Firm the screws, the panel and the bolts into their original place.

 

The above is the step-by-step installation instruction for a 2007-2013 Toyota Land Cruiser 200 radio. If you have any question about it, please seek help from your dealer or a professional. By the way, if it’s the first time you do it, you need to make sure every step before the installation. If you think it too hard to understand all the steps, it’s suggested you go to a car stereo upgrade center to install it or ask a professional to help you.

 

A suitable aftermarket car radio matters a lot if you want to have a satisfying upgrade. You need to confirm that the new car radio can work well with your car as well as be installed in your car seamlessly. If you don’t know which car radio can fit your car, I’d like to recommend an amazing Toyota Land Cruiser 200 radio from Seicane to you, please click:

 

http://www.seicane.com/seicane-s128102-16g-8-inch-android-4-4-4-autoradio-gps-navigation-system-for-2007-2013-toyota-land-cruiser-200-with-cd-dvd-player-bluetooth-3g-wifi-mirror-link-obd2-16g-quad-core-cpu-backup-camera

 

This Toyota Land Cruiser 200 radio comes with a wide range of practical features including DVD player, GPS navigation system, Bluetooth, radio, TV, iPod, USB and SD connection, you can get what you expect from a head unit. You are also allowed to manage documents like WORD/EXCEL/POWERPOINT/PDF/TXT freely in your car just as you are in the office. Just take this fantastic unit to enjoy the great convenience and enjoyment on your way!

 

Nowadays, more and more owners of Toyota Land Cruiser install a new aftermarket radio on their car, because of the original radio of it has few functions. So, do you want to have a high quality driving life? Aftermarket Toyota Land Cruiser Radio is a good choice for most of us. Here are some professional instructions of Toyota Land Cruiser Radio installation. But if you didn’t install a radio before, you’d better do it with the help of a professional technician in case of some irreparable damage is being made.

Before installation, look at the picture of Seicane 1998-2007 Toyota Land Cruiser Radio after installation.

1998-2007 TOYOTA Land Cruiser Radio after installation

1998-2007 TOYOTA Land Cruiser Radio after installation

If you have the same dashboard with the picture shows, you can follow the instructions below.

 

 

Precautions before installation:

1.Before you begin any work, remember to disconnect negative power cable to avoid danger

2.Please turn off your car series include the radio unit and park your car well.

3.Before connecting, please make sure the ignition is off to avoid short circuit and connect the yellow and res cable at last.

 

1998-2007 Toyota Land Cruiser Radio installation

1)First remove two trim panels at each side of center console and set it aside.

1998-2007 TOYOTA Land Cruiser Radio installation step 1

1998-2007 TOYOTA Land Cruiser Radio installation step 1

2)Remove the top panel and set it aside.

1998-2007 TOYOTA Land Cruiser Radio installation step 2

1998-2007 TOYOTA Land Cruiser Radio installation step 2

3)Remove 4 screws holding the unit with a Phillips screwdriver.

1998-2007 TOYOTA Land Cruiser Radio installation step 3

1998-2007 TOYOTA Land Cruiser Radio installation step 3

4)Gently take out the panel on the radio interface.

1998-2007 TOYOTA Land Cruiser Radio installation step 4

1998-2007 TOYOTA Land Cruiser Radio installation step 4

5)Then take out the radio and disconnect cables at back of it.

1998-2007 TOYOTA Land Cruiser Radio installation step 5

1998-2007 TOYOTA Land Cruiser Radio installation step 5

6)Connect the cables on the new head unit as the user manual shows and place them well.

7)Put the new head unit into the dash.

8)Turn on the new head unit and have a comprehensive check if it works well.

9)Install 4 screws back to their original position.

10)Check whether the unit is working without problem.

11)If everything is OK, make trim panel back on your new Seicane radio.

 

By the way, you should make sure whether the aftermarket radio fits your car before installation, and here is a good aftermarket radio of Seicane which fits Toyota Land Cruiser well:

http://www.seicane.com/seicane-s126002-1998-2007-toyota-land-cruiser-100-series-android-4-4-4-radio-dvd-player-gps-navigation-system-with-800-480-touch-screen-bluetooth-3g-wifi-aux-dvr-mirror-link-obd2-steering-wheel-control

This Seicane Toyota Hilux Radio can be a good choice for you. It has intelligent pure android 4.4.4 operation system and 6.2 inch HD 800*480 multi-touch screen.

And now, time to add a new look and style to your car with our popular 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 TOYOTA Land Cruiser 100 series multimedia GPS system. It comes with a large amount of high-end features, for instance, built-in GPS navigation system, dvd player, bluetooth hands-free phone calling, bluetooth streaming music, FM/AM radio tuner, USB connection, etc. What’s more, Multimedia files formats such as DVD/DIVX/MP4/MP3/MP2/VCD are compatible.

Before installation, look at the picture of Seicane 2001-2008 Toyota RAV4 Radio after installation.

2001-2008 Toyota RAV4 Radio after installation

2001-2008 Toyota RAV4 Radio after installation

If you have the same dashboard with the picture shows, you can follow the instructions below.

 

Do you want to have a better in-car environment? Thesedays, more and more Toyota RAV4 owners upgrade their factory radio to touch screen DVD player. Aftermarket Toyota RAV4 Radio is a awesome choice for most of us. Here are some professional instructions of Toyota RAV4 Radio installation. But if you didn’t install a radio before, you’d better do it with the help of a professional technician in case of some irreparable damage is being made.

 

Precautions before installation:

1.Before you begin any work, remember to disconnect negative power cable to avoid danger

2.Please turn off your car series include the radio unit and park your car well.

3.Before connecting, please make sure the ignition is off to avoid short circuit and connect the yellow and res cable at last.

 

2001-2008 Toyota RAV4 Radio installation

1)First remove two trim panels at each side of center console and set it aside.

2001-2008 Toyota RAV4 Radio installation step 1

2001-2008 Toyota RAV4 Radio installation step 1

2)Remove the top panel and set it aside.

2001-2008 Toyota RAV4 Radio installation step 2

2001-2008 Toyota RAV4 Radio installation step 2

3)Remove 4 screws holding the unit with a Phillips screwdriver.

2001-2008 Toyota RAV4 Radio installation step 3

2001-2008 Toyota RAV4 Radio installation step 3

4)Gently take out the panel on the radio interface.

2001-2008 Toyota RAV4 Radio installation step 4

2001-2008 Toyota RAV4 Radio installation step 4

5)Then take out the radio and disconnect cables at back of it.

2001-2008 Toyota RAV4 Radio installation step 5

2001-2008 Toyota RAV4 Radio installation step 5

6)Connect the cables on the new head unit as the user manual shows and place them well.

7)Put the new head unit into the dash.

8)Turn on the new head unit and have a comprehensive check if it works well.

9)Install 4 screws back to their original position.

10)Check whether the unit is working without problem.

11)If everything is OK, make trim panel back on your new Seicane radio.

 

By the way, you should make sure whether the aftermarket radio fits your car before installation, and here is a good aftermarket radio of Seicane which fits Toyota RAV4 well:

http://www.seicane.com/seicane-s126002-aftermarket-android-4-4-4-gps-navigation-system-for-2001-2008-toyota-rav4-radio-replacement-with-bluetooth-800-480-touch-screen-3g-wifi-mirror-link-steering-wheel-control-obd2-aux-video-dvr

This Seicane Toyota RAV4 Radio can be a good choice for you. It has intelligent pure android 4.4.4 operation system and 6.2 inch HD 800*480 multi-touch screen.

This in dash car DVD player features a useful and latest GPS system and the advanced bluetooth technology for easy wireless pairing with enabled devices to make or receive hands-free calls and enjoy streaming music. The ability of USB and an SD card slot are also provided for you for more portable devices to let you have an enjoyable experience while driving. The installation is quite easy and it is just plug and play. No wire needs to be modified or cut for the simple installation.

Look at this image, this is Seicane 2012 Toyota COROLLA Radio after installation.

2012 Toyota Corolla Radio after installation

2012 Toyota Corolla Radio after installation

Do you have a 2012 Toyota Corolla? If you say yes, and you want to install a new Toyota COROLLA Radio with navigation DVD player, then you can read this blog patiently and it will tell you detailed installation steps for 2012 Toyota COROLLA radio navigation DVD player.

 

Before the installation, I’d like to share a good unit with you:

http://www.seicane.com/android-afermarket-car-stereo-for-2012-toyota-corolla-with-radio-dvd-player-bluetooth-gps-navigation-mirror-link-multi-touch-screen-obd-dvr-tv-usb-sd-3g-wifi-rear-view-camera-ipod-s167010

 

If you have not bought a new aftermarket radio, this one can be a good choice for you. It has intelligent pure android 4.4.4 operation system and 7 inch HD 1024*600 multi-touch screen and supports dual-screen display for the highest resolution of 2048*1536.

You can perform Google search on the road with quick search box, play online games, watch videos, download online data and check emails by connecting to any WiFi hotspot in range or 3g internet, download any applications in the android market for access to games, Skype, MSN, YouTube, twitter, E-Book, Gmail etc. You can set any of your favorite application icons as shortcut on the main menu and set the position of the icons according to your preference. And it is your perfect road companion.

 

2012 Toyota Corolla Radio installation

1·First remove the negative cable from the battery.

2·Then return to the inside of the Toyota Coralla, using a panel removal tool, unclip side panels from lower center console.

2012 Toyota Corolla Radio installation step 1

2012 Toyota Corolla Radio installation step 1

3·Using a small flat blade screwdriver remove the plastic piece that’s contains the shifter override, insert key into override move in gear and remove shift benzal piece and unplug the connectors.

2012 Toyota Corolla Radio installation step 2

2012 Toyota Corolla Radio installation step 2

2012 Toyota Corolla Radio installation step 3

2012 Toyota Corolla Radio installation step 3

4·Remove two screws from sides of aux input panel and unplug connectors.

2012 Toyota Corolla Radio installation step 4

2012 Toyota Corolla Radio installation step 4

2012 Toyota Corolla Radio installation step 5

2012 Toyota Corolla Radio installation step 5

5·Using a plastic tool, unclip side panels from radio.

2012 Toyota Corolla Radio installation step 6

2012 Toyota Corolla Radio installation step 6

6·Remove air vent and unplug hazard switch.

2012 Toyota Corolla Radio installation step 7

2012 Toyota Corolla Radio installation step 7

7·Remove four 10mm bolts from stereo.

2012 Toyota Corolla Radio installation step 8

2012 Toyota Corolla Radio installation step 8

8·Pull out the radio and unplug connectors.

2012 Toyota Corolla Radio installation step 9

2012 Toyota Corolla Radio installation step 9

9·Make antennas and cables connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect whole procedure.

10·Connect the new Toyota COROLLA Radio to your Toyota Corolla, you should check your connections, the new unit’s position, and you’d better have a tidy for the cables.

11·Check whether the unit is working properly.

12·When the radio is working properly, firm four removed bolts and two screws that are put aside, then make panel back on your new unit.

 

We have finished installation of Toyota COROLLA Radio, and your wonderful car life is starting now!

Firstly,we can have a look at this picture:it’s head unit after installation,aftermarket audio navigation system of 2008 2009 2010 2011 Toyota Auris.

head unit after installation,aftermarket audio navigation system of 2008 2009 2010 2011 Toyota Auris

head unit after installation,aftermarket audio navigation system of 2008 2009 2010 2011 Toyota Auris

Are you the owner of Toyota Auris from 2008 to 2011 and is your car stereo looks like this one?Maybe most of you haven’t upgraded it for taking it as a complex thing.But actually it’s not if you can find right and detailed installation steps for 2008 2009 2010 2011 Toyota Auris navigation system with bluetooth dvd.

From the picture at the beginning,we can find that this new unit is different from original ones on its outside appearance and functions.Many people choose to replace original stereo with a new one just for these changes.With high speed development of technology,people can also enjoy its labor work very quickly.

If you are not very familiar with this unit and have a lot of questions,I advice you to visit following website which has detailed information for it:http://www.seicane.com/double-din-sat-nav-speaker-upgrade-for-2008-2009-2010-2011-toyota-auris-with-hd-touch-screen-radio-rds-cd-dvd-player-tv-tuner-3g-wifi-aux-ipod-steering-wheel-control-c028.

Searching information about car dvd installation include reading essays which will show you specific steps to achieve it,so it’s right for you to have a look at it,no matter what kind of situation you are in,it will benefit your life more or less.

There are about 7 steps to achieve the process of Toyota Auris navigation installation,and this process is mainly on the removal steps.Because if you finished removal affairs it means that you have finished most of the installation.Removal affairs generally can be divided into four parts,including remove trim panel,loose screws,remove dashboard the CD player.

2008 2009 2010 2011 Toyota Auris car stereo removal and navigation installation:

1.Unclip side panels from higher center console with the help of panel removal tool

Unclip side panels from higher center console with the help of panel removal tool

Unclip side panels from higher center console with the help of panel removal tool

If you feel a little hard,you can open up the left beside console to achieve this

open up the left beside console

open up the left beside console

2.Take down four screws which parted two on each side where the consoles were removed

Take down four screws which parted two on each side

Take down four screws which parted two on each side

3.You can remove the dashboard gently but also easily after four screws are taken down

remove the dashboard gently

remove the dashboard gently

4.Then take the original CD player out

take the original CD player out

take the original CD player out

5.Disconnect all the cables one by one

Disconnect all the cables one by one

Disconnect all the cables one by one

6.Connect all cables between new unit and those of the car, install it into right place

7.Put the dashboard inand firm screws which were put aside

It won’t take you too much time to accomplish the installation procedure.Please be gentle to those things that are removed by you,such as panels and you also set the screws at a visible place for easy to find.

I believe that your life especially when you are on a journey with car will be more colorful when it has a such car dvd player,and the gps nav system is one of the most popular functions.But before you enjoyed all these,keep your safety in mind when you are upgrading your car radio.

Warm tips:

Multi-functions of new head unit are good indeed,but do not let them instead of your attention or vigor,or it can be very dangerous.

You can enjoy the beautiful music or listen to radio tuner when you are busy driving.

For more car stereos,you can visit http://www.seicane.com/ to have a better choice.