Car Dvd | car dvd blog

10Nov 2021

Android Car Stereo Installation Guide in 2012-2015 Toyota Reiz Mark X

Whenever and wherever we drive, the car stereo is an important assistant. It plays wonderful music when we feel tired and bored, it navigates us to the correct destination in a safe and fast route, it helps improve driving safety etc. However, all these things can be true only when you having a multifunctional touch screen car stereo system. If there is only an older stereo in your car, I am afraid you have to listen to the same radios or music in every drive. That won’t be a good experience.

Spend some dollars, you will be able to get an upgraded stereo. Some cars’ basic stereo is easy to replace, such as the 2012-2015 Toyota Reiz Mark X stereo. Whether you are the owner of 2012-2015 Toyota Reiz Mark X or not, you’ll learn some tips in this stereo upgrade guide.

Installation Steps of 2012-2015 Toyota Reiz Mark X GPS Navigation Stereo System

You have many choice in purchasing the upgraded car stereo, we would like to recommend the Seicane Android Car Stereo with GPS (product model: H6162) for you. After getting the new stereo, you should prepare some tools like plastic pry tools, screwdrivers etc. And to make sure the safety, it’s better to cut off the car power before working.

Take a look at the factory radio of Toyota Reiz Mark X.

Step 1, Remove the trim panels on the two sides of the stereo.

Step 2, Remove screws that fixed the car stereo.

Step 3, Take down the whole stereo and disconnect the plugs.

Step 4, Remove screws of the metal brackets that fixed the original main unit and the A/C button panel.

Step 5, Separate the main unit and the A/C button panel.

Step 6, Keep the A/C button panel and install it back to the dash.

Step 7, Tighten the screws.

Step 8, Connect Power Harness, RCA Cable and CAM Cable to the Seicane stereo.

Step 9, Correspondingly connect the new stereo cables to the car plugs. Read the user manual to get help if you are not sure the ports.

Step 10, Install the touchscreen stereo to the dash.

Step 11, Install the trim panels back.

Step 12, Power on the car to test the new GPS navigation stereo system to see whether it functions well.

This 9” touchscreen Android head unit comes a lots of features and functions that make your drive easier and safer.

It supports 3D navigation. When you use this unit to navigate to somewhere, it shows you comprehensive navigation information, such as the current location, speed, mileage, landmark building display, 3D street view etc, so as you get to the destination quickly and safely.
The product can apply various radio channels. If you are a radio enthusiast, then you are provided with FM, AM, RDS radios by this product. What’s more, the radio area is worldwide, including Asia, Europe, Russia, Japan, USA, China and so on.
Apart from radios, you can play good music in the stereo. Since it supports 3G/4G/WIFI network, you’ll get chances to find your favorite singers’ latest songs once connecting to the Internet.
At time waiting someone, how about watching some videos or movies? The high-resolution gives you amazing viewing experience.
Adding some external car cameras like rear view camera, DVR to help increase safety. When you need to reverse to park a car, with a rear view camera installed, the stereo system can automatically switch to the parking images, thus you can park the car easier.

Don’t hesitate to upgrade your factory stereo now, let it be the perfect assistant on your journey!

22Oct 2021

Aftermarket GPS Car Radio Replacement Instructions for 2010-2013 BMW X5 E70 (CIC System)

eric ⋅ Leave a Comment

Vehicles come with different radio systems due to their makes, years, models. Some of them look wonderful and offer various functions. While some are old-fashioned designs with simple functions, especially the older the car, the older the radio. But, whatever your original car radio looks like, there is always room for you to make improvement. Just spend several seconds to read this article, you’ll get to know how to install a car radio.

No matter which car you do the radio replacement work, here are some tips you need to know. Firstly, prepare handy tools which may include plastic pry tools, screwdrivers in different size, tape, power drill etc. Secondly, as we will work on the auto power system, for safety, it’s better to keep car power off during the removal and installation process.

Now, let’s check out all the steps to finish the replacement.

Radio replacement on a BMW vehicle

Car model: 2010 2011 2012 2013 BMW X5 E70 (CIC System)

New radio: Seicane H814 Android Touchscreen GPS Radio System

Section 1, How to remove the original radio?

Step 1, Use the plastic pry tool to pry open the A/C outlet, take down the outlet and disconnect its plug.

Step 2, Remove two screws that fixed the original radio screen, one at left side, another at right side. Take down the screen and unplug the connectors.

Step 3, Remove screws that fixed the button panel, then pry to open it and take it down, as well as disconnect the plugs.

Step 4, Remove screws that fixed the original DVD unit, take it down and unplug all the connectors.

Section 2, How to install a new radio?

Step 5, Have a check for the wiring harness as well as other accessories of the new radio screen system from Seicane.

Step 6, Connect the new wiring harness to car plugs, then correspondingly connect the new radio screen and original DVD unit. Check the user manual to get help if you have difficulties in distinguish different interfaces.

Step 7, After connecting the new screen and factory DVD unit, you can turn on the car to test the new radio system, if everything works normally, then install all the car parts back. If there is problem, check carefully whether the cables are connected correctly.

A quick look of Seicane touchscreen radio for BMW vehicle

Bigger screen to provide better sight

This for 2010 2011 2012 2013 BMW X5 E70 (CIC System) radio mainly consists of a 10.25″ IPS screen, which looks very exquisite and supports touchscreen operation. You can enjoy videos at a perfect view. What’s more, when you use the navigation, everything about the route will be shown super clear on the large display. This makes huge differences compared to the original small screen.

More functions to have more fun

The time when boredom and fatigue hit you on the drive, Seicane car radio will be the best way to help you get refresh. You can listen to FM/AM/RDS radios, enjoy some songs of your favorite singers, find interesting videos on Youtube, surf the Internet to know news, etc. With the Carplay functions, you can play phone applications on the radio screen.

Increase driving safety on the journey

With integrated technology in the radio, you are able to add external car cameras to the GPS stereo system to make your drive safe and easy, including backup camera, driving recorder, rear view camera and more.

22Jul 2021

How to Install an Aftermarket Car Stereo System in 2009-2012 Mazda 3?

eric ⋅ Leave a Comment

In today’s cars, their radio system is one of choices to be considered when most people buy cars. You don’t need to do anything and just ease if you already had car with a satisfied stereo. I am sure that makes your drive comfortable. Yet for those whose cars just come with a standard stereo allowing them to listen to music and radios and can’t do anything more, they should consider to invest an aftermarket car stereo system.

As an owner of Mazda 3, I never regret replacing its factory stereo for the aftermarket car audio navigation system, which has added more simplicity and convenience in my every drive. Now at this post, I will tell you how I changed the new stereo by myself.

The steps of replacing Mazda 3 factory stereo

Below picture is the original stereo system of my car. To do the replacement, you need to get a screwdriver, a hard card, and keep in mind that must cut off the car power before doing anything.

Step 1, To remove the air outlet: Insert a hard card into the seam of the air outlet, slide the card and use some force to pry the outlet, then you can remove it.

Step 2, Remove the screws that fixed the original stereo unit.

Step 3, Pull out the stereo unit and unplug the connectors.

Step 4, Now, you can install the new stereo system. Firstly, have a check for the wiring harness and other accessories of the new stereo to make sure a smooth work.

Step 5, Then connect cables between the new stereo and car plugs. This will require your patient and carefulness to recognize plug interfaces, thus you’d better have your user manual handy.

Step 6, After connecting all the cables, you can turn on your car to test the product whether works normally.

Step 7, If everything of the product functions, then fix well the stereo in the dashboard and install the air outlet back. The whole replacement job is finished. If the new unit doesn’t function, please double check whether the cables are connected correctly.

The reasons to change my Mazda 3’s base stereo unit

Actually, I have no special reasons to purchase a new stereo for my car, I also don’t hate using the old stereo. I just wondered if I should make some changes to my car, then I decided to upgrade its stereo at first. Anyway, I love the new Seicane android car stereo system.

With the new stereo, we don’t have to struggle to navigate on our smartphone while driving, the large stereo screen shows everything clearly and take us to everywhere quickly.

We are given more choices for joy as we can use the new stereo to listen to music or radios, watch videos, and surf the Internet and so on. In long drives, these are best ways to ease fatigue and help keep fresh.

I would highly recommended you to add a rear view camera if you are planning to buy a Seicane car stereo navigation system. You can find that most people have troubles in reversing a car, especially when they just look at the rearview mirrors. Installing a rear view camera to the Seicane stereo, you are provided HD parking images when reversing, helping you see the rear situation and park car smoothly.

It turns out that making change is always good! Are you ready to get your new car stereo now?

12Jul 2021

Citroen C4L Radio System: Removal, Installation and Use

eric ⋅ Leave a Comment

Thanks to the navigation system, now we will never lose wherever we go. If you often drive the car to everywhere, you need a navigation system you can trust. There is no any problem if your car comes a nice radio navigation system from the factory, but if not, also don’t worry, there are quality aftermarket car radio navigation systems you can opt to upgrade the factory one.

As we can see, some cars are still equipped with old-fashioned radio that isn’t touch screen, can’t watch video, no mention to display navigation and reversing images. For convenience and enjoyment of quality life, installing an aftermarket car stereo navigation system become the best way.

Being one of Citroen C4L owners, I have never regretted to upgrade its factory radio, now I can enjoy a joyful in-car life with my family.

The removal and installation steps for Citroen C4L radio system

For convenience and safety, you’d better prepare tools includes plastic pry tool and screwdriver, and cut off the car power during the whole replacement. Following comes the steps.

Step 1, Remove the plastic baffle under the radio system.

Step 2, Use a plastic pry tool to remove the A/C outlet.

Step 3, Take off the two trim panel around the original radio screen.

Step 4, Remove six screws which fixed the radio system.

Step 5, Take off the radio and unplug its connectors.

Step 6, Remove the two screws that fixed the host, then take off the host and unplug the connector.

Step 7, Remove this frame that fixed the host.

Step 8, Check whether all the accessories of the new car stereo navigation system are complete.

Step 9, Corresponding connect the cables between the new car stereo system and the car.

Step 10, Now you can turn on the car to test whether the new stereo is working normally.

Step 11, If there is no problem, fix well the stereo and all the car accessories.

Superiority of aftermarket car radio system with navigation

Large display.No one can deny that we keep a more comfortable mood when seeing navigation information or videos in a 8 by 11 inches Thanks to the touchscreen feature, we can check the route situation just with fingertip click.

Combine navigation and entertainment. This is one of the super functionsof aftermarket car stereo Integrated with audio output with navigation, you can still enjoy listening to music as you make your way towards your destination.

Increasing driving safety. It’s true that making the Bluetooth calls when driving helps lower accident since drivers needn’t loose their hand on the steering wheel control. Apart from this, many car stereos are designed with camera support ports, that means you can add backup camera, 360° camera etc. to the unit, to keep a easier and safer drive.

Adaptability.There are some navigation units that are specific to various vehicles of different years, but there are also many universal units that you can adapt to a variety of platforms.

Adding value to the car. The innovative and multifunctional car stereo navigation systemadds more value when you decide to sell the car. For most buyers, they tend to choose cars with good navigation system, even such car is a little expensive.

24Jun 2021

DIY Car Radio Replacement for 2006-2011 Honda Civic (LHD)

eric ⋅ Leave a Comment

Actually, getting my first car is a little hard, so I cherish it very much and keep it maintained regularly. It’s a 2009 Honda Civic (LHD), since I purchased it, I used it for work, picking up children to and from school, as well as road trips. For us, the car is one of the important family member.

The Honda Civic has been with us for 7 years, there were more or less breakdown in some parts, but we got them repaired in time to avoid inconvenience. Besides, to enrich in-car life, especially during road trips, we also upgraded some parts of the car, and last month, we just replaced the factory radio for a new one to ready for our coming summer trip. Below is the replacement guide.

Car radio replacement instructions for 2006-2011 Honda Civic (LHD)

I purchased the new aftermarket radio system from Seicane and finished the replacement job with my kids, hoping to enhance their interest in DIY. Before the installation job, make sure you have tools like plastic pry tool, screwdriver in hand and cut off the car power for safety. This picture shows the original radio.

Step 1 Use the plastic pry tool to pry the small board under the radio system, and remove the two eight millimeter bolts of the plastic trim.

Step 2 Carefully pull out the panel under the steering wheel.

Step 3 Remove the screws that fixed the whole top panel, then pull out the whole top panel and unplug its connector.

Step 4 Pull out the original radio unit and unplug all the connectors.

Step 5 Check the cable accessories of the new Seicane car radio GPS system.

Step 6 Remove the HVAC control board, air outlet and related accessories of the old radio panel, and install them to the new car navigation radio.

Step 7 Remove these white and black small chips of the original head unit, then install them on the new radio unit.

Step 8 Correspondingly connect cables between new car radio navigation system and the car.

Step 9 Turn on the car to test whether the new car radio unit functions normally.

Step 10 If there is no problem, fix the new radio in the dashboard, and install all the panel accessories in their original positions.

Comparison of Seicane car radio navigation system and factory radio

As you can see the first picture, the factory radio is the old-fashioned and button-operated radio which only has simple functions. It can’t meet our continually increasing needs in entertainment and driving safety. For example, with such a factory radio, how can we make hand-free Bluetooth calls? Where to display navigation? And how to reverse easily since there is no reversing images to see? While the Seicane car radio helps us more than these.

Firstly, with the 10.1 inch HD resolution touchscreen, we get a large and comfortable vision when operate the Seicane navigation radio system. The high configuration such as intelligent pure Android 10.0 operation system, 8-core CPU etc. keep a fast and smooth operation and stable performance. In terms of entertainment, this radio gives you the ability to get the latest albums of your favorite singers and watch various interesting videos online.

In fact, the primary reason we want to upgrade the factory radio is to get navigation and reversing assist. Now with this amazing Seicane car radio system, we arrive to destination quickly and have no trouble to reverse.

If you are planning to upgrade your Honda Civic (LHD) radio, give a try for Seicane.

04Jun 2021

The Ultimate Guide of Replacing 2016-2018 Jeep Grand Cherokee Car Audio System

eric ⋅ Leave a Comment

Not all cars come with excellent stereos, the fact is nowadays lots of car owners tend to replace their factory car radios, especially what they have is a button-operated radio with simple functions while no special features.

When it comes to car audio upgrade, most of drivers would like to go to the car repair shops to do the replacement job due to various reasons. While some of people do the job by themselves. If you love DIY, own a 2016-2018 Jeep Cherokee and want to change its car audio, then we are at the same category. In short, I’d love to share the replacement guide here.

Replacement steps of the 2016-2018 Jeep Cherokee car stereo

Audio choice: Seicane Car Audio with Carplay for 2016-2018 Jeep Cherokee

Tools ready: Plastic pry tool, screwdriver, scissors, tape

Important tip: Make sure the power is cut off before the job

#1 Pry up the panel and take it out

#2 Remove four screws that fixed the original radio unit

#3 Take out the radio unit and unplug its connectors

#4 Check for the harnesses of the new Seicane car audio GPS navigation system

#5 Remove the air outlet accessories of the old panel, and install them on the new radio system

#6 Connect the new audio system to the car

#7 Fix well the new audio system and test it

#8 If everything works, the installation is ok

Introduction of 2016-2018 Jeep Cherokee Seicane Car Stereo GPS Navigation

System Configuration

The car stereo is used the latest Android system (version 10.0), equipped with 8-core CPU, 2GB RAM and 32GB Storage, so users can operate it fast and smoothly.

Screen Display

It’s made of the 9.7 inch IPS screen that provides the best viewing angle and won’t cause light reflecting under the direct sun. Besides, the fresh unique user interface with dynamic graphics increases your visual experience.

Support Carplay

Seicane car stereo has the ability to support Carplay. With the Carplay USB dongle to connect phone and stereo, you can use most of the phone applications without trouble.

With RDS/DSP

There are built-in RDS and DSP(36EQ). When you listen to music and receive broadcast channels, you can enjoy the high quality sound effect.

Accurate Navigation

Road and traffic situation change quickly, without the help of navigation, you can hardly arrive at your destination. The navigation function in Seicane car stereo applied the latest GPS technology, which is able to provide more accurate data in real-time and display information in 3D, helping you get to the destination quickly and safely.

Support 360°Camera

Adding the 360°camera, you get to know the situations of front and rear, left and right view, safer to drive and reverse.

There are more functions and features you can benefit from this car stereo, get it right now.

22Mar 2016

How to set the steering wheel control of a 2010-2013 Great Wall Hover H3 H5 car stereo with 3G WiFi Bluetooth Music DVD player

eric ⋅ Leave a Comment

Look at the image below, it’s appealing, isn’t it? That’s the latest 2010-2013 Great Wall Hover H3 H5 car stereo from Seicane with a lot of practical features which include GPS navigation, DVD player, FM/AM radio, Bluetooth music, Bluetooth hands-free calls, TV, WIFI, 3G, USB, SD, etc.

2010-2013 Great Wall Hover H3 H5 car stereo

Besides, it can support a lot of useful options like digital TV, mirror link, DVR, backup camera, OBDII, etc. What’ s more important, you can still keep the functions of your steering wheel control after installation. It is of great convenience for you to directly adjust the volume or answer phone calls by clicking buttons on the steering wheel when you connect your mobile phone with this stereo. If it’s the first time for you to use a new car stereo, you may be confused at how to set the steering wheel control. Here I’d like to share the method with you.

After you install this Great Wall Hover H3 H5 car stereo in your car, please turn in on. Then enter the setting interface. You can find out the steering wheel control item by using the scroll bar. Then go into the steering wheel control interface where you can see a lot of icons. Then you reset the steering wheel control. After that, long press each button on the steering wheel and click related icon in the setting interface. Once the setting is successful, you can activate the icons in the setting interface. Then you are able to use the buttons in the steering wheel control for the activated functions.

The functions of the steering wheel control make it possible for you to keep your hands on the steering wheel and stay focused on the road ahead to answer phone calls, which makes you safer all the way. To enjoy the steering wheel control function, you can upgrade your factory radio with a new car stereo. If you are looking for an ideal car stereo for your 2010-2013 Great Wall Hover H3 H5, you are recommended to check out the following link which is about an excellent Great Wall Hover H3 H5 car stereo from Seicane, please click:

http://www.seicane.com/seicane-s127701-8-inch-quad-core-2010-2013-great-wall-hover-h3-h5-android-4-4-4-sat-nav-car-dvd-head-unit-with-3g-wifi-radio-tuner-bluetooth-music-mirror-link-obd2-16g-flash-rearview-camera-usb-sd-mp3

This Seicane Great Wall Hover H3 H5 car stereo comes with a large 8 inch multi-touch screen with 1024*600 pixel resolution to simplify the operation and provide the great viewing for you to enjoy your favorite videos on the big screen. And you can arrive at your destination on time with ease with the help of the most accurate guidance provided by the GPS navigation system. Bluetooth hands-free calls and Bluetooth music are accessible to you for safety and pleasure as long as you have a mobile phone with Bluetooth feature.

Just enjoy all your trips with this intelligent Seicane Great Wall Hover H3 H5 car stereo in your car! It’ll be your perfect road companion all the way. Good luck to you!

11Mar 2016

How to install a new 2002-2011 Pontiac G3 car stereo with AM FM Radio Bluetooth Mirror Link OBD2 DVD player GPS navigation

eric ⋅ Leave a Comment

The latest head unit can support freely surfing the internet and also be compatible with many other practical features nowadays. If you find your factory radio can’t meet your needs anymore, then it’s time for you to consider replacing it with a brand new car stereo. The image below is an intelligent 2002-2011 Pontiac G3 car stereo from Seicane, you can refer to the installation instructions below if you find your dashboard is the same as it.

2002-2011 Pontiac G3 car stereo after installation

Here are some tips for you before the installation:

Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
A lever and a screwdriver need to be prepared before the installation.

2002-2011 Pontiac G3 car stereo installation guide

Remove the trim panel. There are several parts of the trim panel. You should remove them one by one. First remove the trim panel which is around the screen. Then, remove the trim panel which is next to the CD player. Remove the screws on the trim panel before you pry it from the dashboard. And put them away and keep every part well so that you can install them back to the original place perfectly.
2002-2011 Pontiac G3 car stereo installation step 1

Unscrew the screws on the units and put them away.
2002-2011 Pontiac G3 car stereo installation step 2

Take the original radio out of the dash.
2002-2011 Pontiac G3 car stereo installation step 3

Disconnect the connectors at the back of the original radio.
2002-2011 Pontiac G3 car stereo installation step 4

Install the new Seicane car stereo. The installations of different units are different. You should refer to the installation instruction from the dealer and connect the new Seicane car stereo to the original wiring harness. If it needs a wiring harness adaptor, connect the adaptor to the original wiring harness first, then, connect the adaptor to the new Seicane car stereo.
2002-2011 Pontiac G3 car stereo installation step 5

Turn on the new Seicane car stereo and test it. Connect the negative cable on the battery and turn on the new Seicane car stereo to test all the functions in it. If everything’s good, fix the screen by putting it hard to the dashboard and fix the DVD player with screws.
2002-2011 Pontiac G3 car stereo installation step 6

Install the trim panel. Install the trim panel which was next to the CD player before back to its original place.

That’s all the installation guide for a 2002-2011 Pontiac G3 car stereo. Wish you can get help from it. If you have any questions, please ask your dealer or a professional for help. Make sure you are clear about every step before you start to install. If you find it too hard to install, you can go to a car stereo upgrade center to have it installed.

Furthermore, you need to pick a fitting car stereo for your car, so that it can be seamlessly installed in your car. If you haven’t had one yet, you can refer to the intelligent 2002-2011 Pontiac G3 car stereo from Seicane as follows, please click:

http://www.seicane.com/seicane-s127011-16g-pure-android-4-4-4-sat-nav-head-unit-for-2006-2011-chevy-chevrolet-epica-with-quad-core-cpu-3g-wifi-dvd-am-fm-radio-bluetooth-mirror-link-obd2

The Pontiac G3 car stereo is designed with a large 7 inch multi-touch screen with 1024*600 pixel resolution to simplify the operation is quite desirable. With the built-in GPS navigation, you are able to get to a wide range of locations within the least time. To simply link your mobile phone with this unit, you can make and receive calls with your hands on the steering wheel control as well as stream music for security and relaxation. What’s more, your steering wheel control can still work after installation.

Just take this all-in-one Pontiac G3 car stereo and enjoy a brand new driving experience right now with such a reasonable price right now! What are you waiting for?

09Mar 2016

How to upgrade a 2006-2011 Ford Fusion car stereo with easy 7 steps

eric ⋅ Leave a Comment

Do you worry about the installation of a new car stereo when you want to upgrade your factory radio? If you say yes, then this article can be helpful for you. Please look at the picture below, it’s a great 2006-2011 Ford Fusion car stereo from Seicane after installation. If your dashboard is the same as it, you can refer to the following detailed 2006-2011 Ford Fusion car stereo installation guide to help with the installation of your new car stereo.

2006-2011 Ford Fusion car stereo after installation

Here are some tips for you before the installation:

1.Please disconnect the power before the installation.

Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible, so each related part of the unit can be fixed securely.

2006-2011 Ford Fusion car stereo installation guide

Plug removal tools in the small holes of the factory radio on both sides.
2006-2011 Ford Fusion car stereo installation step 1

Take the factory radio out of the dash.
2006-2011 Ford Fusion car stereo installation step 2

Disconnect the antenna at the back of the factory radio.
2006-2011 Ford Fusion car stereo installation step 3

Disconnect other connectors at the back of the factory radio.
2006-2011 Ford Fusion car stereo installation step 4

Make antennas and cables of the new Seicane car stereo connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect the whole procedure.
Put the new Seicane car stereo into the dash.
Turn on the new Seicane car stereo and check whether the car stereo is working properly.

That’s all the installation guide for a 2006-2011 Ford Fusion car stereo. Wish it can be helpful for you. If you have any questions during the whole process, you can ask your dealer or a professional for help. Make sure you are clear about every step before you start to install, for incorrect installation may cause irreparable damage to both your car and your new car stereo.

Besides, it’s also important to choose a suitable car stereo for your car to make sure you have a successful upgrade. To check if you have a fitting car stereo, you can refer to the following Seicane 2006-2011 Ford Fusion car stereo which can work well with your car. Here’s the link:

http://www.seicane.com/seicane-s127301-quad-core-2006-2011-ford-fusion-android-4-4-4-autoradio-gps-audio-system-with-cd-dvd-player-bluetooth-3g-wifi-mirror-link-obd2-rearview-camera-16g-flash-steering-wheel-control-mp3-aux

This 2006-2011 Ford Fusion car stereo is upgraded to the latest Android 4.4.4 to smooth the operation. Coming with a large 7 inch multi-touch screen, you are enabled to easily operate everything while you are driving. The Bluetooth technology allows you to sync your mobile phone for hands-free calls and streaming audio to keep you safe and enjoyable on all trips.

Just reach your destination with this amazing 2006-2011 Ford Fusion car stereo! Good luck to you!

03Mar 2016

7 steps to install a 2002-2010 Chevy Chevrolet OPTRA radio with Quad-core CPU 3G WiFi DVD AM FM Radio touch screen

eric ⋅ Leave a Comment

If you find the factory radio is far enough to meet all your needs in a car, then it’s time for you to replace it with a modern car radio which can be compatible with a lot of practical features and entertainment options to provide you with the most convenience and enjoyment. Look at the picture below, it’s a latest 2002-2010 Chevy Chevrolet OPTRA radio from Seicane. If you have the same or similar dashboard as the picture above, you can read the following 2002-2010 Chevy Chevrolet OPTRA radio installation instructions carefully to help with the installation.

2002-2010 Chevy Chevrolet OPTRA radio after installation

Here are some tips for you before the installation:

Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
A lever and a screwdriver need to be prepared before the installation.

2002-2010 Chevy Chevrolet OPTRA radio installation guide

Remove the trim panel. There are several parts of the trim panel. You should remove them one by one. First remove the trim panel which is around the screen. Then, remove the trim panel which is next to the CD player. Remove the screws on the trim panel before you pry it from the dashboard. And put them away and keep every part well so that you can install them back to the original place perfectly.
2002-2010 Chevy Chevrolet OPTRA radio installation step 1

Unscrew the screws on the units and put them away.
2002-2010 Chevy Chevrolet OPTRA radio installation step 2

Take the original radio out of the dash.
2002-2010 Chevy Chevrolet OPTRA radio installation step 3

Disconnect the connectors at the back of the original radio.
2002-2010 Chevy Chevrolet OPTRA radio installation step 4

Install the new Seicane radio. The installations of different units are different. You should refer to the installation instruction from the dealer and connect the new Seicane radio to the original wiring harness. If it needs a wiring harness adaptor, connect the adaptor to the original wiring harness first, then, connect the adaptor to the new Seicane radio.
2002-2010 Chevy Chevrolet OPTRA radio installation step 5

Turn on the new Seicane radio and test it. Connect the negative cable on the battery and turn on the new Seicane radio to test all the functions in it. If everything’s good, fix the screen by putting it hard to the dashboard and fix the DVD player with screws.
2002-2010 Chevy Chevrolet OPTRA radio installation step 6

Install the trim panel. Install the trim panel which was next to the CD player before back to its original place.

Wish the above step-by-step installation guide can be helpful for you. If you think it too hard to understand all the steps, it’s strongly suggested you ask a professional for help. You can consult your dealer as well. You can also go to a car stereo upgrade center to have it installed.

In addition, you need to make sure you have a correct radio which can fit your car perfectly. If you don’t have one, I’d like to recommend an ideal 2002-2010 Chevy Chevrolet OPTRA radio from Seicane to you:

http://www.seicane.com/seicane-s127011-16g-pure-android-4-4-4-sat-nav-head-unit-for-2006-2011-chevy-chevrolet-epica-with-quad-core-cpu-3g-wifi-dvd-am-fm-radio-bluetooth-mirror-link-obd2

This amazing Chevy Chevrolet OPTRA radio is equipped with the most powerful RK3188 1.6 GHz Cortex A9 Quad-core CPU and the advanced Android 4.4.4 version ensures a smoother and faster performance than ever before. You are enabled to get to your destination easily with the most accurate directions of the GPS system. The Bluetooth technology makes you possible to sync your cell phones with this unit for hands-free calls and streaming music for a safe and pleasant journey.

To upgrade your factory radio with this fantastic Chevy Chevrolet OPTRA radio for a different driving experience, it’s the time right now! Good luck to you!

1 2 3 … 6 Next »

Category Archives: Car Dvd

Android Car Stereo Installation Guide in 2012-2015 Toyota Reiz Mark X

Installation Steps of 2012-2015 Toyota Reiz Mark X GPS Navigation Stereo System

Aftermarket GPS Car Radio Replacement Instructions for 2010-2013 BMW X5 E70 (CIC System)

Radio replacement on a BMW vehicle

Section 1, How to remove the original radio?

Section 2, How to install a new radio?

A quick look of Seicane touchscreen radio for BMW vehicle

Bigger screen to provide better sight

More functions to have more fun

Increase driving safety on the journey

How to Install an Aftermarket Car Stereo System in 2009-2012 Mazda 3?

Citroen C4L Radio System: Removal, Installation and Use

DIY Car Radio Replacement for 2006-2011 Honda Civic (LHD)

The Ultimate Guide of Replacing 2016-2018 Jeep Grand Cherokee Car Audio System

How to set the steering wheel control of a 2010-2013 Great Wall Hover H3 H5 car stereo with 3G WiFi Bluetooth Music DVD player

How to install a new 2002-2011 Pontiac G3 car stereo with AM FM Radio Bluetooth Mirror Link OBD2 DVD player GPS navigation

How to upgrade a 2006-2011 Ford Fusion car stereo with easy 7 steps

7 steps to install a 2002-2010 Chevy Chevrolet OPTRA radio with Quad-core CPU 3G WiFi DVD AM FM Radio touch screen

Post Navigation

Recent Posts

Views

Recent Comments

Archives

Subscribe

Categories

Meta