Is it possible for me to install a new car radio in my car on my own? Some car owners who want to replace their factory radio may have that question. Actually, the answer is yes. It’s quite simple to install a car radio nowadays based on that most car radios come with special wiring harness to make the installation easier. Look at the picture below, which is a great 2005-2008 Chevy Chevrolet SPARK radio from Seicane. If you have the same dashboard, you can take the following 2005-2008 Chevy Chevrolet SPARK radio installation guide as a reference.
2005-2008 Chevy Chevrolet SPARK radio after installation
Here are some tips for you before the installation:
- Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
- A lever and a screwdriver need to be prepared before the installation.
2005-2008 Chevy Chevrolet SPARK radio installation guide
- Remove the trim panel. There are several parts of the trim panel. You should remove them one by one. First remove the trim panel which is around the screen. Then, remove the trim panel which is next to the CD player. Remove the screws on the trim panel before you pry it from the dashboard. And put them away and keep every part well so that you can install them back to the original place perfectly.
2005-2008 Chevy Chevrolet SPARK radio installation step 1
- Unscrew the screws on the units and put them away.
2005-2008 Chevy Chevrolet SPARK radio installation step 2
- Take the original radio out of the dash.
2005-2008 Chevy Chevrolet SPARK radio installation step 3
- Disconnect the connectors at the back of the original radio.
2005-2008 Chevy Chevrolet SPARK radio installation step 4
- Install the new Seicane radio. The installations of different units are different. You should refer to the installation instruction from the dealer and connect the new Seicane radio to the original wiring harness. If it needs a wiring harness adaptor, connect the adaptor to the original wiring harness first, then, connect the adaptor to the new Seicane radio.
2005-2008 Chevy Chevrolet SPARK radio installation step 5
- Turn on the new Seicane radio and test it. Connect the negative cable on the battery and turn on the new Seicane radio to test all the functions in it. If everything’s good, fix the screen by putting it hard to the dashboard and fix the DVD player with screws.
2005-2008 Chevy Chevrolet SPARK radio installation step 6
- Install the trim panel. Install the trim panel which was next to the CD player before back to its original place.
Wish the above installation guide is helpful for you. If you have any questions, you can ask your dealer or a professional for help. If you find it too hard for you to install it on your own, it’ s strongly suggested you have it installed by a professional or directly go to a car stereo upgrade center to install it.
Before the installation, you need to make sure you have a right car radio which can be installed without any gap in your car. If you don’t have a suitable car radio, I’ d like to recommend an ideal 2005-2008 Chevy Chevrolet SPARK radio from Seicane to you, please click:
This Chevy Chevrolet SPARK radio comes with an advanced Android 4.4.4 version and a RK3188 1.6 GHz Cortex A9 Quad-core CPU, you can have a faster and easier operation on its large 7 inch touch screen with 1024*600 pixel resolution. Reach your destination on time under the guidance of the turn-by-turn direction and voice prompts.
As long as you have a mobile phone with Bluetooth, you are able to pair it with this unit to make and receive calls without taking your hands off the steering wheel control and stream music at the same time. In this way, a safe and pleasant driving is always with you and your passengers.
Take your driving experience up a notch with this Chevy Chevrolet SPARK radio right now and have a wonderful time with it on all trips!
Recent Comments