Since the installation of a car radio is not difficult, more and more car owners are capable of installing a new car radio on their own. If you have some related installation experience, you can also achieve the installation by yourself with the help of a correct installation instruction. If you are a car owner of 2004 2005 2006 DODGE Avenger Caliber Challenger Dakota Durango Journey Magnum, you can refer to the following related installation instruction to help with the installation of your car radio.

2004 2005 2006 DODGE Avenger Caliber Challenger Dakota Durango Journey Magnum car radio after installation

2004 2005 2006 DODGE Avenger Caliber Challenger Dakota Durango Journey Magnum car radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2004 2005 2006 DODGE Avenger Caliber Challenger Dakota Durango Journey Magnum car radio installation

1. The original car radio.

The original car radio

The original car radio

2. Adjust the shift lever to a lower gear, then loosen the black plastic part around the shift lever and rotate it aside.

3. Remove two Phillips screws inside the shifter bazel.

Remove two Phillips screws inside the shifter bazel

Remove two Phillips screws inside the shifter bazel

4. Pull the bottom portion of bazel , start working it around.

Pull the bottom portion of bazel , start working it around

Pull the bottom portion of bazel , start working it around

5. Use a flat plastic pry tool to pry the edge between the top platform and the front trim assembly so as to release the top platform.

Use a flat plastic pry tool to pry the edge between the top platform and the front trim assembly so as to release the top platform

Use a flat plastic pry tool to pry the edge between the top platform and the front trim assembly so as to release the top platform

6. Remove the top platform.

Remove the top platform

Remove the top platform

7. Use a screwdriver to unscrew the two top Phillips screws that fix the trim bazel. Then remove the bazel.

Use a screwdriver to unscrew the two top Phillips screws that fix the trim bazel. Then remove the bazel

Use a screwdriver to unscrew the two top Phillips screws that fix the trim bazel. Then remove the bazel

7-1

7-1

8. Remove four mounting screws that are holding the radio on the dashboard.

Remove four mounting screws that are holding the radio on the dashboard

Remove four mounting screws that are holding the radio on the dashboard

9. Take out the original radio from the dash.

Take out the original radio from the dash

Take out the original radio from the dash

10. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

11. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

12. Connect the Seicane car radio to your original radio’s plugs.

13. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

14. Put the new Seicane car radio into the dash.

15. Put everything into their original place. All the installation is done.

 

Before the installation, please make clear every specific step. If you have anything cannot understand, you can contact with your dealer or ask a professional for help. Besides, it is essential for you to check whether your new car radio can work well in your car or not. If your car radio is not compatible enough, for your better installation, I’d like to recommend an amazing 2004 2005 2006 DODGE Avenger Caliber Challenger Dakota Durango Journey Magnum car radio from Seicane to you. Here comes the link, please click:

http://www.seicane.com/9-inch-2004-2005-2006-dodge-avenger-caliber-challenger-dakota-durango-journey-magnum-android-bluetooth-gps-navigation-system-with-quad-core-cpu-tv-tuner-usb-aux-steering-wheel-control-s088713

This intelligent car radio, specially designed for 2004 2005 2006 DODGE Avenger Caliber Challenger Dakota Durango Journey Magnum, is compatible with a wide range of features which can meet almost all your various needs. Based on the most advanced Android 6.0 operation system and a R16 1.6 GHz Quad-core CPU, this radio runs faster than ever and facilitates its operation. After the installation of this car radio, it is possible for you to get access to a lot of features, including high-precision 3D GPS navigation, Bluetooth streaming music, Bluetooth hands-free calls, DVD player, FM/AM radio, DVD, etc. If you like this radio, don’t hesitate to add it to your cart! Good luck to you!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Post Navigation