As everyone knows, to upgrade a car stereo integrated with both practical and entertainment features is becoming more and more prevalent among many car owners. It is necessary for you to upgrade a car stereo if you want to enjoy more convenience and enjoyment in your car and improve your driving experience. Actually, it is not hard to install a car stereo if you follow a correct installation guide. So if you are going to install a 2011-2014 Hyundai Grandeur gps nav car stereo in your car, you can read this article carefully to get some help.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2011-2014 Hyundai Grandeur car stereo installation guide
1.Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2.Remove screws that fixed the radio on the dashboard.
3.Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4.Unplug the connectors at the back of the factory radio.
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6.Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7.If everything is OK, firm screws into their original place.
8.Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
Wish the installation guide can help with your 2011-2014 Hyundai Grandeur gps nav car stereo installation to some extent. Before the installation, please make sure you are clear about every detailed step. If you have any question, you can turn to your dealer for help. Or you can arrange a professional to install the car stereo straightly if you still think the installation is too complicated for you. Besides, if you are still search for a compatible car stereo for your car, I’d like to share a great 2011-2014 Hyundai Grandeur gps nav car stereo from Seicane with you. For more details, please click:
This 2011-2014 Hyundai Grandeur gps nav car stereo is very intelligent as it is based on the Android 5.1.1 operation system and a RK3188 1.6 GHz Cortex A9 quad-core CPU, which will facilitate your operation. With a large 8 inch multi-touch smart screen, you are able to enjoy the best visual effect when you are playing a movie, music video or TV programs, etc. With such a marvelous car stereo installed in your car, you can easily control GPS navigation, DVD player, Bluetooth and other features. Just enjoy your trip with this device in your beloved car. Good luck to you!
Recent Comments