At first,we can have a look at following picture which is the head unit after installation,dvd gps navigation system with 3D and google map of 2010 2011 2012 Toyota Verso.If you find that the trim panel of it is same to yours then it fits for your car.

Head unit after installation,dvd gps navigation system with 3D and google map of 2010 2011 2012 Toyota Verso

Head unit after installation,dvd gps navigation system with 3D and google map of 2010 2011 2012 Toyota Verso

There are many people who are owners of 2010 2011 2012 Toyota Verso are thinking about to upgrade their car head unit themselves.But have no idea about Detailed installation instructions for 2010 2011 2012 Toyota Verso dvd gps with 3D MAP.

Nowadays cars have became a normal family transportation,and many car owners are trying to make their car better to enjoy more convenient and comfortable life.With more complex roads, installing a precise Toyota Verso dvd radio in car is very necessary,it helps people not only to spend less vigor on thinking about where to go but also safer.There is no doubt that reading or searching some materials of this aspect is a good choice to you.

Before starting to know it,there are some announcements for you.

Precautions before installation:

1.Please check out car’s appearance and the unit functions before your work

2.Do not shorten the GPS cable,which may lead to antenna problem

3.Please don’t make the GPS antenna winding the steering wheel and shift lever,or it will be dangerous.

2010 2011 2012 Toyota Verso original stereo removal:

1.Use a lever to pry right and left part and disconnect the cables

Use a lever to pry right part of the unit

Use a lever to pry right part of the unit

Use a lever to pry left part of the unit

Use a lever to pry left part of the unit

2.Remove two screws on both sides with a screwdriver and put them aside for usage once again

Remove two screws on both sides with a screwdriver

Remove two screws on both sides with a screwdriver

3.Pull trim panel off the head unit

Pull trim panel off the head unit

Pull trim panel off the head unit

4.Gently make the cables that connected with the panel disconnected

Gently make the cables that connected with the panel disconnected

Gently make the cables that connected with the panel disconnected

When you have finished above steps,you can have a look at the removed radio and see if you have removed the stereo totally.And make a comparison between your removed one and next one:

The dashboard after original radio removal

The dashboard after original radio removal

Your work is not over yet,there are still 3 steps to achieve it.

2010 2011 2012 Toyota Verso aftermarket dvd installation:

5.Remove screws beside the CD player and take out the CD player

6.Make connections on all cables as the instructions said,after that install your new unit in it

7.Make removed screws and other parts of the unit back to their original positions

This is basically the installation procedure for Toyota Verso GPS dvd audio system.If you want to know better about the new stereo,you can visit some helpful websites,for example:http://www.seicane.com/2010-2011-2012-toyota-verso-in-car-autoradio-gps-system-bluetooth-music-am-fm-radio-cd-dvd-player-tv-tuner-3g-wifi-mp3-mp5-ipod-aux-dvr-1080p-steering-wheel-control-c133.

We know a fact that car radios are mostly same and differs at little place,so it’s normal to find some difference and notice that do not do self-work when you are not sure about it,you’d better ask a skilled man to help you solve the problem to ensure your security.

In a word,you should make adequate preparations for this work.Wish you good luck!

If this one doesn’t fit your car or you want to choose another one,you can visit http://www.seicane.com/,there are a lot of car stereos there.

 

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Post Navigation