Firstly,we can have a look at this picture:it’s head unit after installation,aftermarket audio navigation system of 2008 2009 2010 2011 Toyota Auris.
head unit after installation,aftermarket audio navigation system of 2008 2009 2010 2011 Toyota Auris
Are you the owner of Toyota Auris from 2008 to 2011 and is your car stereo looks like this one?Maybe most of you haven’t upgraded it for taking it as a complex thing.But actually it’s not if you can find right and detailed installation steps for 2008 2009 2010 2011 Toyota Auris navigation system with bluetooth dvd.
From the picture at the beginning,we can find that this new unit is different from original ones on its outside appearance and functions.Many people choose to replace original stereo with a new one just for these changes.With high speed development of technology,people can also enjoy its labor work very quickly.
If you are not very familiar with this unit and have a lot of questions,I advice you to visit following website which has detailed information for it:http://www.seicane.com/double-din-sat-nav-speaker-upgrade-for-2008-2009-2010-2011-toyota-auris-with-hd-touch-screen-radio-rds-cd-dvd-player-tv-tuner-3g-wifi-aux-ipod-steering-wheel-control-c028.
Searching information about car dvd installation include reading essays which will show you specific steps to achieve it,so it’s right for you to have a look at it,no matter what kind of situation you are in,it will benefit your life more or less.
There are about 7 steps to achieve the process of Toyota Auris navigation installation,and this process is mainly on the removal steps.Because if you finished removal affairs it means that you have finished most of the installation.Removal affairs generally can be divided into four parts,including remove trim panel,loose screws,remove dashboard the CD player.
2008 2009 2010 2011 Toyota Auris car stereo removal and navigation installation:
1.Unclip side panels from higher center console with the help of panel removal tool
Unclip side panels from higher center console with the help of panel removal tool
If you feel a little hard,you can open up the left beside console to achieve this
open up the left beside console
2.Take down four screws which parted two on each side where the consoles were removed
Take down four screws which parted two on each side
3.You can remove the dashboard gently but also easily after four screws are taken down
remove the dashboard gently
4.Then take the original CD player out
take the original CD player out
5.Disconnect all the cables one by one
Disconnect all the cables one by one
6.Connect all cables between new unit and those of the car, install it into right place
7.Put the dashboard inand firm screws which were put aside
It won’t take you too much time to accomplish the installation procedure.Please be gentle to those things that are removed by you,such as panels and you also set the screws at a visible place for easy to find.
I believe that your life especially when you are on a journey with car will be more colorful when it has a such car dvd player,and the gps nav system is one of the most popular functions.But before you enjoyed all these,keep your safety in mind when you are upgrading your car radio.
Warm tips:
Multi-functions of new head unit are good indeed,but do not let them instead of your attention or vigor,or it can be very dangerous.
You can enjoy the beautiful music or listen to radio tuner when you are busy driving.
For more car stereos,you can visit http://www.seicane.com/ to have a better choice.
Recent Comments