If you desire to upgrade your factory radio, you’d better find a detailed installation guided for it, which can be much helpful for you if you are going to install it on your own. This passage is about a step-by-step installation instruction specially for a 2010-2013 VW Volkswagen POLO Multivan head unit. If you also have the same dashboard as the picture below which is a 2010-2013 VW Volkswagen POLO Multivan head unit from Seicane after installation, you can follow it.
2010-2013 VW Volkswagen POLO Multivan head unit after installation
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2010-2013 VW Volkswagen POLO Multivan head unit installation guide
1. Remove the top panel with a lever.
Remove the top panel with a lever
2. Disconnect the connector at the back of the panel.
Disconnect the connector at the back of the panel
3. Unscrew the screw with a screwdriver.
Unscrew the screw with a screwdriver
4. Remove the metal sheet on the top with your hands.
Remove the metal sheet on the top with your hands
5. Unscrew two screws circled in red shown as follows under the metal sheet.
Unscrew two screws circled in red shown as follows under the metal sheet
6. Remove the air conditioner vent with your hands.
Remove the air conditioner vent with your hands
7. Unscrew two screws under the vent with a screwdriver.
Unscrew two screws under the vent with a screwdriver
8. Remove the panel on the original car radio.
Remove the panel on the original car radio
9. Unscrew four screws holding the original car radio with a screwdriver.
Unscrew four screws holding the original car radio with a screwdriver
10. Take the original car radio out of the dash.
Take the original car radio out of the dash
11. Disconnect all the connectors at the back of the original car radio.
Disconnect all the connectors at the back of the original car radio
12. Check all the accessories for the new Seicane head unit.
Check all the accessories for the new Seicane car radio
13. Connect the harnesses to the back of the new Seicane head unit.
Connect the harnesses to the back of the new Seicane car radio
14. Connect the Seicane head unit to your original car radio ‘s plugs.
15. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
16. Put the new Seicane head unit into the dash.
17. Put everything into their original place.
Is it easy for you to understand all the installation steps for a 2010-2013 VW Volkswagen POLO Multivan head unit? If not, it’s suggested you consult your dealer. Or you can also directly have a professional install it. If you haven’t found an ideal head unit for your car, you can refer to this amazing 2010-2013 VW Volkswagen POLO Multivan head unit from Seicane. It comes with the latest features and capabilities for you to upgrade your factory radio. For more details, you can click:
Upgrade the stock radio in your vehicle with this remarkable 2010-2013 VW Volkswagen POLO Multivan head unit. Turn-by-turn GPS navigation with voice prompts is given to you for an accurate guidance while driving. You can also safely make and receive hands-free phone calls, search for contact lists and stream music with Bluetooth from your enabled smart phone. What’s more, this multimedia player has a 8″ touch screen display that can be used with reverse cameras to make parking easier. Just have great fun with it on all trips!
Recent Comments