With a factory radio which only comes with single functions, you may easily get bored on a long trip. But with a multifunctional car radio, you can get access to some entertainment options so as to gain a ton of fun in your trip. If you are fed up with your factory radio, you can consider replacing it with a new multifunctional car radio. And you don’t have to worry about the installation as the installation process is not complicated with the help of a correct installation guide. If you have no experience at all, you can ask a professional for help. Now I’d like to share a detailed 2003-2013 Audi A3 car radio installation guide from Seicane for your reference.
2003-2013 Audi A3 GPS Bluetooth DVD Car Radio after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2003-2013 Audi A3 car radio installation guide
1. The original car radio.
The original car radio
2. Prepare four removal keys shown in the picture below.
Prepare four removal keys shown in the picture below
3. There are four removal slots in the radio. Insert the release keys into the holes of the radio. Please remember to put the key with the flat side facing the outside of the radio.
There are four removal slots in the radio. Insert the release keys into the holes of the radio. Please remember to put the key with the flat side facing the outside of the radio
4. Pull outwards to release the radio.
Pull outwards to release the radio
5. Disconnect the connectors and cables to release the radio.
Disconnect the connectors and cables to release the radio
6. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
7. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
8. Connect the Seicane car radio to your original car radio’s plugs.
9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane car radio into the dash.
11. Put everything into their original place. All the installation is done.
Don’t worry if you encounter any problems before or during the installation. In that case, you can seek advice from your dealer or turn to a professional for help. Or during the installation, you can also ask someone experienced to help you install the new car radio alongside. Since an ideal car radio plays irreplaceable role in your car, it is very important for you to select a suitable car radio which fits your car very well. Here I would like to introduce a marvelous 2003-2013 Audi A3 car radio from Seicane to you.
This marvelous car radio has higher performance and configuration to provide users with the best services since it is loaded with the most advanced Android 6.0 operation system and a powerful 8- Core 1.5 GHz RK-PX5 A53 processor.
Through turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you can easily know your current locations and find the right way to drive to your ideal destinations. And this unit’s dual zone function enables you to play music while navigating.
Under the wireless Bluetooth technology, you can connect your Bluetooth-enabled mobile phone to this unit, thus you can make use of Bluetooth hands-free calls and streaming music to add convenience and joyfulness to your driving.
What’s more, you can add a TPMS to this unit which can reports real-time tire-pressure information and help you save fuel consumption, extend the tire life, decrease downtime and maintenance and increase environmental efficiency.
Wish you like this all-in-one unit and good luck to you.
Recent Comments