Are you considering about replacing your old factory radio with a brand new multifunctional radio? And are you anxiously desired to improve your driving experience ? If your answers are both “yes”, I would like to suggest you that you need take action now to install a new radio for your car. Take 2003-2009 KIA Spectra as an example, a detailed guide about the installation of gps radio for it is as follows to help you upgrade your factory radio.
Seicane 2003-2009 KIA Spectra car radio after installation
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details:http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2003-2009 KIA Spectra car radio installation guide
1. Pry around the edges of the trim panel with a lever.
Pry around the edges of the trim panel with a lever
2. Remove the trim panel.
Remove the trim panel
3. Disconnect all the connectors of the trim panel.
Disconnect all the connectors of the trim panel
4. Unscrew all the screws holding the original car radio in place with a screwdriver.
Unscrew all the screws holding the original car radio in place with a screwdriver
5. Gently take the original car radio out of the dashboard.
Gently take the original car radio out of the dashboard
6. Disconnect all connectors at the back of the original car radio.
Disconnect all connectors at the back of the original car radio
7. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
8. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
9. Connect the Seicane car radio to your original car radio ‘s plugs.
10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car radio into the dash.
12. Put everything into their original place. All the installation is done.
With the help of the above guide, you can even do it individually if you have some experience of installing a car radio. If you don’t have related experience or cannot finish the installation by yourself, you can also go to a car radio upgrade center to have the car radio installed. But if you are still searching for an ideal car radio that can fit your car well, I would like to recommend an intelligent 2003-2009 KIA Spectra car radio from Seicane with you.
Undoubtedly, this smart car radio will be one of your wise choices to replace your factory radio. With the built-in Bluetooth technology, you are allowed to have hands-free calls and stream music from your cell phone directly. Besides, equipped with worldwide real-time navigation functions of high accuracy, this car radio can lead you to your ideal destinations correctly via its turn-by-turn directions and voice prompts. Just take it with you and install it in your car. Good luck to you!
Recent Comments