When you decided to upgrade your factory car radio with a new aftermarket car stereo which comes with a number of up-to-date features for you to meet your various kinds of need in a head unit, you may take some factors into consideration, including price, quality, functions, design, installation, warranty, after-sale service, etc. Among all of the factors, the installation may help you lower your budget on the cost of a new car stereo based on the reason that it is so easy to install a new car stereo that some car owners can do it by themselves with a correct guide. In this passage, the step-by-step instructions on how to remove and install a 2002 2003 2004 2005 2006 Chrysler PT Cruiser car stereo are given to you as a reference if you are going to install a new car stereo on your own at home.
2002 2003 2004 2005 2006 Chrysler PT Cruiser car stereo after installation
Although the installation is quite easy, you’d better ask a professional technician for help if you are a green hand on this. Because incorrect removal and installation may cause some irreparable damage to both your car and the new car stereo, which is the most disappointing thing for you.
Precautions before the installation:
- Please disconnect the negative cable of the battery for your safety.
- Please prepare a lever and a screwdriver before the installation.
The below is the step-by-step instruction on how to upgrade a 2002 2003 2004 2005 2006 Chrysler PT Cruiser car stereo.
- Remove the trim piece above cup holder with a lever.
2002 2003 2004 2005 2006 Chrysler PT Cruiser car stereo installation step 1
- Remove 2 screws behind the trim piece.
2002 2003 2004 2005 2006 Chrysler PT Cruiser car stereo installation step 2
- Gently pry around the side of trim panel with the lever and then remove the trim panel.
2002 2003 2004 2005 2006 Chrysler PT Cruiser car stereo installation step 3
- Remove 4 screws which holds the factory radio in place.
2002 2003 2004 2005 2006 Chrysler PT Cruiser car stereo installation step 4
- Take out the factory radio.
2002 2003 2004 2005 2006 Chrysler PT Cruiser car stereo installation step 5
- Disconnect the smaller harness on the behind of the factory radio.
2002 2003 2004 2005 2006 Chrysler PT Cruiser car stereo installation step 6
- Connect the cables of the new Seicane car stereo according to the guidance of the user manual.
- Connect the smaller harness at the back of the new radio.
- Put the new Seicane car stereo back into the dash.
- Install four screws and trim panel.
- Install 2 screws behind the trim piece and the trim piece.
- Turn on the new radio and have a comprehensive test.
If you find the above dashboard different from yours, please rest assured since that there are difference between different car years. With the similar instruction, you can also finish the installation with the above guide. If you have any further question, it’s suggested that you turn to your dealer for help.
An ideal new car stereo can help you upgrade your factory radio with great success and a brand new driving experience. Here I’d like to share a fantastic 2002 2003 2004 2005 2006 Chrysler PT Cruiser car stereo from Seicane for you as a reference when you are going to pick a right car stereo for your vehicle.
Integrated with both an amazing autoradio DVD player and the latest GPS navigation system, this modern 2002 2003 2004 2005 2006 Chrysler PT Cruiser car stereo can must bring you the most convenience and enjoyment on all your trips. With this GPS navigation system, You can get access to lane assist, 3D street view, landmark display, intelligent route planning, turn-by-turn direction and voice prompts for easily getting to your desired destination. Besides, the bluetooth functionality is also built for you to wirelessly pair your enabled mobile phone for hands-free calls and streaming music to keep safe and pleasant in motion.
Just maximize your driving pleasure with this wonderful 2002 2003 2004 2005 2006 Chrysler PT Cruiser car stereo from now on!
Recent Comments