If your beloved car belongs to 2010 2011 Renault Megane,we hope that most system of it can
be corresponding well advanced.This is a normal psychology and today I will show you
detailed and easy installation steps for 2010 2011 Renault Megane navigation audio
system with BT music AUX-in to help you achieve audio part of the car.
A lot of people are updating their car stereos to enjoy more entertaining life,and it’s
achieved by driving car with a multimedia dvd diaplay.Compared with factory stereo,a new
radio has increased new functions in it to make our driving time more enjoyable and make
us feel easy,I think this is one object of its production.
The aftermarket radio stereo for Renault Megane is different from some other autoradios,for
its touch screen is placed farther than normal ones with occluders surround it.You needn’t
to worry that it’s not convenient for you to watch the screen,however it can not only let you
see clearer on shinning days,but also protect your screen from damage or collision,which will
surely length its lifetime.This is an advantage and if you have doubts here is a picture to help
you get a intuitive feeling:DVD gps navigation system bluetooth of 2010 2011 Renault
Megane.
DVD gps navigation system bluetooth of 2010 2011 Renault Megane
It’s not enough to you to make well understanding of Renault Megane navigation system with
this picture,,then I advice you to seek for more messages about it from the Internet,for example:
2010 2011 Renault Megane car stereo removal and installation:
1.Pry the trim above the glove box off
Pry the trim above the glove box off
2.Reveal these 3 torx screws
Reveal these 3 torx screws
3.Pry the trim off the unit
Pry the trim off the unit
4.Remove the screw which is on drivers side
Remove the screw which is on drivers side
5.Pry the steering wheel off surround to gain access to more torx screws
Pry the steering wheel off surround to gain access to more torx screws
6.Nothing with these two screws
Nothing with these two screws
7.Pry the pillar trim off
Pry the pillar trim off
8.Remove the 2 torx screws which are at each corner of the dash,then pull the outer part of
the rivet out
Remove the 2 torx screws which are at each corner of the dash
9.Carefully make the dash out off the middle
Carefully make the dash out off the middle
10.Lift the dash back
Lift the dash back
11.Carefully make the dash out of the car over the steering wheel and store it safely
Carefully make the dash out of the car over the steering wheel and store it safely
12.Press down on the tabs at each side of the unit and then pull it backwards
Press down on the tabs at each side of the unit and then pull it backwards
13.Disconnect the connectors at the back
Disconnect the connectors at the back
You may think it a little complex to accomplish removal procedure,but won’t only if you can
act according to them,and your work is not over yet for you will continue to install a new
one in your car.
You should read carefully about cables connecting part from installation instructions and act
it according to right guide step by step,After right connection,install new unit into your car.
Turn on new unit and have a check for it.If all function operates well,then firm all removed
screws back to original places and the same to other removed parts.Then whole procedure
is finished.
Please be careful when you are installing the new unit,and you’d better ask one of your friends
beside to help you.Be gentle to your car equipment and be serious when doing every step.
If you want to know more stereos for some other cars,you can find them on some websites,for
example:http://www.seicane.com/.
Recent Comments