To pursue a more comfortable in-car environment and driving experience, one of the straightforward ways is to replace your factory radio with a brand new one. Some car owners may think it will cost too much money to replace it. However, if you know how to install a new car radio, you can save a lot of money as well as unnecessary waiting time in a car radio upgrade center. Here is a 2001-2010 Hyundai LAVITA car radio installation guide, if you have a same or similar vehicle type, you can take it as reference.
Some tips before the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2001-2010 Hyundai LAVITA car radio installation guide
1.Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2.Remove screws that fixed the radio on the dashboard.
3.Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4.Unplug the connectors at the back of the factory radio.
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6.Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7.If everything is OK, firm screws into their original place.
8.Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
All steps for the installation of a 2001-2010 Hyundai LAVITA car radio are shown above. Wish it can be helpful for you. If you encounter any questions, you can ask your dealer for help or arrange a technician to install it. But if you don’t have a suitable car radio, you can check the ink below which is about a wonderful Hyundai LAVITA car radio from Seicane.
This great 2001-2010 Hyundai LAVITA car radio can be your perfect road companion as it can accurately lead you to your ideal destinations by its built-in 3D navigation system of high accuracy. The Bluetooth function is available with this double din car DVD player, which allows you to have hands-free calls as well as enjoy streaming music without taking hand off the steering wheel. Besides, because of its additional entertaining features, you are able to play DVDs and CDs to please both you and your passengers during the whole driving. Good luck to you!
Recent Comments