Both you and your passengers may easily get tired or bored due to a long-time driving or staying in car. Under this circumstance, to cheer you up, you can turn on FM/AM radio or DVD player to play something interesting to bring you happy laughters and cheerful voices. However, if your factory radio cannot be compatible with many entertainment features, you can replace it with a new aftermarket car stereo. This article is mainly about a detailed installation guide of a 2002-2009 Toyota Prado Cruiser car stereo. If you have exactly the same or similar dashboard, you can take this guide as a reference.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2002-2009 Toyota Prado Cruiser car stereo installation guide
1. Gently squeeze, pull and lift away the surrounding panels on each side.
2. Grip gently at the bottom and lift the air conditioning vents.
3. Squeeze clips to release electrical connectors.
4. There are four screws holding the radio on the dashboard. Remove them with a screwdriver.
5. Gently take out the original radio.
6. Disconnect connectors and cables at the back the radio.
7. Check all the accessories for the new Seicane car stereo.
8. Connect the harnesses to the back of the new Seicane car stereo.
9. Connect the Seicane car stereo to your original radio’s plugs.
10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car stereo into the dash.
12. Put everything into their original place. All the installation is done.
If you have difficulties understanding the above guide, you can contact your dealer for seeking advice. Besides, you can also turn to a professional for help. Or you can ask someone experienced to help you during the installation process.
Before installation, first of all, please confirm that you’ve got a suitable car stereo for your 2002-2009 Toyota Prado Cruiser. If you haven’t bought a suitable one, I’d like to share a 2002-2009 Toyota Prado Cruiser car stereo from Seicane to you. Here comes the link, please click:
Upgraded to the most advanced Android6.0 operation system, a powerful 8-Core 1.5 GHz RK-PX5 A53 processor and 2GB RAM, this car stereo can largely facilitate the operation because of its higher performance and configurations.
As for basic comprehensive features, you can get access to them to gain the greatest convenience and entertainment during your driving. These features are mainly including 3D Navigation, FM/AM radio tuner, CD/DVD player, Bluetooth hands-free calls, Bluetooth music, file management, AUX, steering wheel, USB & SD connection, etc.
What’s more, there are also some optional features can be added to this unit according to your preference and requirement, which mainly include backup camera, OBD2, DAB, TMPS, etc.
With these basic and optional features, almost all your needs can be met in car. If you like this car stereo, just add it to your shopping cart. Good luck to you!
Recent Comments