To drive your beloved car to travel around and listen to your favorite music at the same time, you must feel very relaxed and enjoyable. To get access to more features in car, like GPS navigation, Bluetooth connectivity, FM/AM radio and so on, you can upgrade your factory radio by installing a new aftermarket stereo which supports a lot of practical and entertainment features. If you own a 2009 2010 2011 VW Volkswagen Passat B6, you must be familiar with the image below, which is a modern 2009 2010 2011 VW Volkswagen Passat B6 car stereo after installation from Seicane. If you plan to upgrade your old radio, you can refer to the installation guide as follows.
2009 2010 2011 VW Volkswagen Passat B6 Car Stereo after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2009 2010 2011 VW Volkswagen Passat B6 car stereo installation guide
1. Remove the top panel with a lever.
Remove the top panel with a lever
2. Disconnect the connector at the back of the panel.
Disconnect the connector at the back of the panel
3. Unscrew the screw with a screwdriver.
Unscrew the screw with a screwdriver
4. Remove the metal sheet on the top with your hands.
Remove the metal sheet on the top with your hands
5. Unscrew two screws circled in red shown as follows under the metal sheet.
Unscrew two screws circled in red shown as follows under the metal sheet
6. Remove the air conditioner vent with your hands.
Remove the air conditioner vent with your hands
7. Unscrew two screws under the vent with a screwdriver.
Unscrew two screws under the vent with a screwdriver
8. Remove the panel on the original car radio.
Remove the panel on the original car radio
9. Unscrew four screws holding the original car radio with a screwdriver.
Unscrew four screws holding the original car radio with a screwdriver
10. Take the original car radio out of the dash.
Take the original car radio out of the dash
11. Disconnect all the connectors at the back of the original car radio.
Disconnect all the connectors at the back of the original car radio
12. Check all the accessories for the new Seicane car stereo.
Check all the accessories for the new Seicane car stereo
13. Connect the harnesses to the back of the new Seicane car stereo.
Connect the harnesses to the back of the new Seicane car stereo
14. Connect the Seicane car stereo to your original car radio’s plugs.
15. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
16. Put the new Seicane car stereo into the dash.
17. Put everything into their original place.
If you have any doubts about the car stereo and the installation, please don’t hesitate to contact your dealer, ask an experienced person for help. If you still think it impossible for you to finish the whole installation process successfully, we recommend that you should go to a car stereo upgrade center to ask a technician to help you install the stereo.
Besides, if you are still looking for a suitable car stereo for your car, you may check out the link below which is a 2009 2010 2011 VW Volkswagen Passat B6 car stereo from Seicane.
Coming with Android 5.1.1 operation system, powerful RK3188 1.6 GHz Cortex A9 Quad-core processor and 16 GB INand Flash, this smart 2009 2010 2011 VW Volkswagen Passat B6 car stereo can meet almost all your different needs to replace your old radio.
You can easily find you best route to get to your destinations according to turn-by-turn directions and voice prompts provided by 3D GPS navigation of high accuracy.
The Bluetooth module is specially built in to make you connect your Bluetooth-enabled mobile phone with this unit, so you can make, receive, reject and mute hands-free calls as well as enjoy Bluetooth music from your phone music playlists.
Wish you’ll like this car stereo and wish you have a good time accompanied by it!
Recent Comments