If you own a car, you must know how import role a car stereo play in your car. With an ideal car stereo which is integrated with the latest hardware and software, the operation will become easier and smoother. And this stereo comes with a wide range of features to meet your different needs in car. Therefore, if you are tired of your factory radio for its single function, then don’t hesitate to replace it with a new all-in-one car stereo. The detailed installation steps for a 2003-2011 Audi A4 S4 RS4 Stereo Radio are as follows for your reference.
2003-2011 Audi A4 S4 RS4 Stereo Radio after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2003-2011 Audi A4 S4 RS4 car stereo installation steps
1. There are four removal slots in the stereo.
There are four removal slots in the stereo
2. Prepare four removal keys like what is shown in the picture below.
Prepare four removal keys like what is shown in the picture below
3. Insert the release keys into the holes of the stereo. Please make sure that you put the key with the flat side facing the outside of the stereo.
Insert the release keys into the holes of the stereo. Please make sure that you put the key with the flat side facing the outside of the stereo
4. Pull outwards to release the stereo.
Pull outwards to release the stereo
5. Disconnect the connectors and cables at the back of the stereo.
6. Check all the accessories for the new Seicane car stereo.
7. Connect the harnesses to the back of the new Seicane car stereo.
8. Connect the Seicane car stereo to your original radio’s plugs.
9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane car stereo into the dash.
11. Put everything into their original place. All the installation is done.
Have you learnt something useful from the above steps? If you have any questions, please feel free to seek advice from your dealer. Or you can browse some professional websites. However, if you cannot do it on your own, you can directly arrange a technician to install it.
If you wonder what kind of stereos can fit your car well, I’d like to recommend a powerful 2003-2011 Audi A4 S4 RS4 Stereo Radio from Seicane to you. For more details, you might as well check out the link below:
Undoubtedly you will gain an excellent driving experience with this all-in-one unit installed in your beloved car.
This stereo runs with the stable Android 5.1.1 operation system and a powerful RK3188 1.6 GHz Cortex A9 Quad-core processor to enhance its capability and performance.
Even you are not good at identifying directions, with the 3D GPS navigation of high accuracy, you can easily know your current location and accurately locate to your desired destinations according to the guidance of turn-by-turn direction and voice prompts.
Thanks to anti-shock feature and last position memory technology adopted, this unit is compatible with many audio and video formats, so it allows you to freely watch fantastic movies or videos in motion. However, for your safety, we sincerely suggest you not to do that.
Wish you like this stereo designed for 2003-2011 Audi A4 S4 RS4. Good luck to you!
Recent Comments