For a car driver, it must be very amazing if he can freely enjoy his favorite music and drive comfortably to reach his desired destinations. To achieve that goal, as a car owner, you can also upgrade your mono-functional factory radio by installing a new multifunctional car stereo which can meet your different needs in your car. Today I’d like to share a 2006-2011 Honda Civic Car Stereo Radio installation instruction with you. If you have exactly the same or the similar dashboard, then you can take this instruction as a reference.
2006-2011 Honda Civic Car Stereo Radio after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006-2011 Honda Civic car stereo installation instruction
1. The original car radio.
The original car radio
2. Pry the cover of the slot below the CD player with a lever and remove it.
Pry the cover of the slot below the CD player with a lever and remove it
3. Remove two screws inside the slot with a ninety-degree screwdriver.
Remove two screws inside the slot with a ninety-degree screwdriver
4. Pry the lower panel with a lever, loosen it with your hands at the same time, after that, remove the panel.
Pry the lower panel with a lever, loosen it with your hands at the same time, after that, remove the panel
5. Remove one screw in the dash.
Remove one screw in the dash
6. Remove the vent panel.
Remove the vent panel
7. Unplug the connectors beneath the panel.
Unplug the connectors beneath the panel
8. Pry the edges along the panel of the original radio, then remove it, after that, take the original car radio out of the dash.
Pry the edges along the panel of the original radio, then remove it, after that, take the original car radio out of the dash
9. Unplug the connectors at the back of the original radio.
Unplug the connectors at the back of the original radio
9-1
10. Disconnect the antenna and the other connector on the other side of the original radio.
Disconnect the antenna and the other connector on the other side of the original radio
10-1
11. Check all the accessories for the new Seicane car stereo.
Check all the accessories for the new Seicane car stereo
12. Connect the harnesses to the back of the new Seicane car stereo.
Connect the harnesses to the back of the new Seicane car stereo
13. Connect the Seicane car stereo to your original car radio’s plugs.
14. Put the new Seicane car stereo into the dash.
15. Turn on the new Seicane car stereo and check whether the unit is working properly.
Wish the above installation instruction can be helpful for you to some extent. As for this guide, if you have anything you cannot understand, please feel free to consult your dealer, someone experienced or a professional. For avoiding damage to both your car and your car stereo, you can directly ask a professional technician to help you install the new car stereo. If you are still looking for an ideal car stereo, I’d like to share a remarkable 2006-2011 Honda Civic Car Stereo Radio from Seicane with you. Here is the link, please click:
Running on the intelligent pure Android 6.0 operation system and powerful 8-core 1.5 GHz RK-PX5 A53 processor, this car stereo comes with better performance to be one of your wise choices to replace your factory radio in a 2006-2011 Honda Civic.
You won’t get lost even you are driving around an unfamiliar place. Thanks to turn-by-turn directions and voice prompts provided by the high-accuracy 3D GPS navigation system, you’re able to find the most suitable way to get to your desired destinations accurately. And without taking your hands-off the steering wheel, you are able to make, receive, reject and mute hands-free phone calls as well as listen to streaming music if you pair your Bluetooth-enabled mobile phone with this unit.
What’s more, you can turn on this unit’s DVD player function to play region-free music or movies so as to bring a lot of fun to your driving. Wish you enjoy your driving accompanied by this multifunctional car stereo. Good luck to you!
Recent Comments