There is no denying that to install a new car radio all by yourself can bring you great sense of achievement. To succeed in the car radio installation process, you need to search for a related car radio installation guide which can offer you some help. This passage is mainly about a 2013 2014 2015 VW Volkswagen PASSAT car radio installation guide from Seicane. If you have the same or similar dashboard, you can refer to this guide to help with the installation.
2013 2014 2015 VW Volkswagen PASSAT Car Radio after installation
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2013 2014 2015 VW Volkswagen PASSAT car radio installation guide
1. The original car radio.
The original car radio
2. Open the storage box.
Open the storage box
3. Pull out the panel and remove it gently.Please use a plastic removal tool to help you with the removal.
Pull out the panel and remove it gently.Please use a plastic removal tool to help you with the removal
3-1
3-2
4. Use a T20 screwdriver to remove screws that fixed the radio on the dashboard.
Use a T20 screwdriver to remove screws that fixed the radio on the dashboard
5. Take out the original car radio.
Take out the original car radio
6. Unplug connectors and cables at the back of the radio.
Unplug connectors and cables at the back of the radio
7. Check all the accessories for the new Seicane car radio.
8. Connect the harnesses to the back of the new Seicane car radio.
9. Connect the Seicane car radio to your original radio’s plugs.
10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car radio into the dash.
12. Put everything into their original place. All the installation is done.
It is not abnormal if you encounter any problems before or during the installation process. To deal with the problems, please feel free to consult your dealer, communicate with someone experienced or seek help from a professional. However, if you haven’t have a new car radio yet, here I would like to share an amazing 2013 2014 2015 VW Volkswagen PASSAT car radio from Seicane with you. You might click the link below for more details:
This car radio is running on the intelligent pure Android 7.1 operation system and a high-quality quad-core processor, which can effectively enhance your car’s capabilities and improve its performance.
With the help of the worldwide real-time GPS navigation system, you will be able to easily locate where you are and find the right way to get to your desired destinations through text-to-speech guidance. And this unit’s dual zone function enables you to listen to your favorite music while navigating,which won’t have any negative influence on GPS function.
Wish you like this unit and good luck to you!
Recent Comments