To take your factory radio up a notch, there are more and more options for you to choose from as the technology improves. Some of them are with exquisite appearance, some are with multiple features, while some are with the most competitive price. You can easily pick an ideal one according to your own needs. Here I’ d like to share a detailed installation guide about a Seicane 2014 2015 Honda FIT car stereo, you can follow it to help with your installation.
2014 2015 Honda FIT car stereo after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
2014 2015 Honda FIT car stereo installation guide
1·Remove the original console panel with a lever, pry gently along the gap and pick up the panel. Then set it aside.
1. Remove the original console panel with a plastic knife
2·Remove the four screws that fixed the radio on the dashboard. Removing these screws will not be a difficult job.
2. Remove the four screws that fixed the radio on the dashboard
3·Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
3. Pull the factory radio out of the dash
4·Unplug the connectors.
4. Unplug the connectors
5·Remove the brackets on both sides of the factory radio. So far the removal of the factory radio is completed. Next steps will move on to the installation of the Seicane radio.
5. Remove the brackets on both sides of the factory radio
6·Install the brackets on both sides of the Seicane radio.
7·Dock the connectors of the original vehicle and the upgraded car audio.
7. Dock the connectors of the original vehicle and the upgraded car stereo
8·Insert the wires to the appropriate location of the upgraded head radio. If you are not sure about how to wire correctly, you may refer to the wiring diagram for details.
9·Fix the Seicane stereo with the four screws.
9. Fix the Seicane stereo with the four screws
10·Firm the console panel. Finally the new Seicane stereo is installed and a comprehensive test should be conducted on the new stereo.
Firm the console panel
10. Firm the console panel
Above all, it’s not too difficult to install a new stereo in your car. Please makes sure you are clear about every step before the installation. If you lack of experience to finish the installation on your own, you’d better have it install by a professional. Besides, you need to find a suitable stereo for your car. If you don’t have one, I’d like to recommend a great 2014 2015 Honda FIT car stereo from Seicane to you, please click:
This intelligent Honda FIT car stereo is an ideal replacement for you to upgrade your factory radio. A number of practical features, such as bluetooth hands-free calls, bluetooth music, GPS navigation system, DVD player, Ipod, FM/AM radio, Wifi, etc. are all made for you to get the convenience and entertainment in your vehicle. To make your parking easier, you can also connect a backup camera for help.
Just take your great trips with this amazing Honda FIT car stereo with you all the way. Good luck to you!
Recent Comments