How to upgrade the old factory radio by yourself? This is the question for most car owners want to know. In fact, it’s very simple to install the new car radio by yourself with a detailed installation instruction. So, in here I’d like to share a installation instruction for a 2001-2008 Toyota RAV4 Sat Navi dvd stereo from Seicane to you and wish you can learn something from it.

2001-2008 Toyota RAV4 Sat Navi dvd stereo after installation

2001-2008 Toyota RAV4 Sat Navi dvd stereo after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2001-2008 Toyota RAV4 Sat Navi dvd stereo installation instruction

1. Remove two trim panels at each side of the center console and set it aside.

Remove two trim panels at each side of the center console and set it aside

Remove two trim panels at each side of the center console and set it aside

2. Remove the top panel and set it aside.

Remove the top panel and set it aside

Remove the top panel and set it aside

3. Remove 4 screws holding the unit with a Phillips screwdriver.

Remove 4 screws holding the unit with a Phillips screwdriver

Remove 4 screws holding the unit with a Phillips screwdriver

4. Gently take out the panel on the radio interface.

Gently take out the panel on the radio interface

Gently take out the panel on the radio interface

5. Take out the radio and disconnect cables at back of it.

Take out the radio and disconnect cables at back of it

Take out the radio and disconnect cables at back of it

6. Check all the accessories for the new Seicane head unit.

7. Connect the harnesses to the back of the new Seicane head unit.

8. Connect the Seicane head unit to your original car radio ‘s plugs.

9. Put the new Seicane head unit into the dash.

10. Turn on the new Seicane head unit and have a comprehensive check if it works well.

11. Install 4 screws back to their original position.

12. Install the trim panel back to its original place.

 

All above is the detailed installation instruction for a 2001-2008 Toyota RAV4 Sat Navi dvd stereo. If you find your dashboard is different from the picture shown above, please rest assured that the installation instruction is much same. Or you can arrange the dealer or professional to install it directly.

Besides, you have to check the new car radio in first time and make sure it can work well in your car. If you are still looking for one, I have a wonderful 2001-2008 Toyota RAV4 Sat Navi dvd stereo from Seicane to recommend to you. Please feel free to check it in this link:

http://www.seicane.com/android-oem-car-stereo-gps-bluetooth-for-2001-2008-toyota-rav4-with-dvd-player-navigation-system-mirror-link-hd-touch-screen-obd-dvr-tv-usb-sd-3g-wifi-backup-camera-ipod-s166229

With this most up-to-date 2001-2008 Toyota RAV4 Sat Navi dvd stereo, you can meet all your needs of a car radio. The car radio is equipped with worldwide real-time navigation function of high accuracy. You can also use the Bluetooth function to connect your phone and play your favorite music in your car. Wish you like it and good luck to you!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Post Navigation