Believe it or not, an ideal car radio which supports a wide range of practical and entertainment features can help effectively upgrade your in-car life. If you are not satisfied with your current in-car life and look forward to improving it, you can consider replacing your factory radio with a new aftermarket car radio. The following is a 2006 2007 2008 2009 KIA CEED car radio installation instruction from Seicane. If you have the same or similar dashboard, you can refer to this instruction carefully.
2006 2007 2008 2009 KIA CEED Car Radio after installation
Precautions for this installation:
1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2. Please make sure that all fastened wires are isolated with electrical tape.
3. Please make sure the ignition is off to avoid short circuit.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006 2007 2008 2009 KIA CEED car radio installation instruction
1. Pry around the edges of the trim panel with a lever.
Pry around the edges of the trim panel with a lever
2. Remove the trim panel.
Remove the trim panel
3. Disconnect all the connectors of the trim panel.
Disconnect all the connectors of the trim panel
4. Unscrew all the screws holding the original car radio in place with a screwdriver.
Unscrew all the screws holding the original car radio in place with a screwdriver
5. Gently take the original car radio out of the dashboard.
Gently take the original car radio out of the dashboard
6. Disconnect all connectors at the back of the original car radio.
Disconnect all connectors at the back of the original car radio
7. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
8. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
9. Connect the Seicane car radio to your original car radio ‘s plugs.
10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car radio into the dash.
12. Put everything into their original place. All the installation is done.
Now do you have a general understanding of the above installation instruction? If you meet any difficulties and don’t know how to overcome them, it is suggested that you should contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio. While for the selection of an ideal car radio, if you have no ideas, here I would like to share a remarkable 2006 2007 2008 2009 KIA CEED car radio from Seicane with you. For more information, please click:
With this all-in-one car radio installed in your car, you will be able to have a much smoother and faster operation experience.
With the help of the text-to-speech guidance provided by the 3D high-end GPS navigation system, you are able to easily know your current locations and accurately find the right way to reach any locations you would like to go to. Besides, this unit’s dual zone function enables you to freely enjoy music while navigating, and the music will automatically switch to GPS voice.
What’s more, through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, both Bluetooth hands-free calls and streaming music are available for you to bring you a lot of convenience and enjoyment.
If you like this unit, just add it to your shopping cart. Good luck!
Recent Comments