Now more and more car owners are keen on pursuing a more comfortable in-car environment, thus they try many ways to upgrade their cars’ capabilities. One of the most poplar ways is to replace the factory radio with a new aftermarket car radio which comes with both practical and entertainment features. To install a new car radio, you can refer to a detailed installation guide for help. The following is a detailed 1 Din Universal (Panel Slidable) car radio installation guide from Seicane for your reference.
Some tips before the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
1 Din Universal (Panel Slidable) car radio installation guide
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2. Remove screws that fixed the radio on the dashboard.
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4. Unplug the connectors at the back of the factory radio.
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
If you have any questions, please don’t hesitate to consult your dealer for seeking advice, or turn to a professional for help. During the installation, you can also ask someone experienced to help you install the new car radio. Anyway, it is crucial for you to carefully select an ideal car radio for your car. If you don’t know which kind of car radio can fit your car well, you may refer to the link below which is a remarkable 1 Din Universal (Panel Slidable) car radio from Seicane.
There is no doubt you will embrace a brand new operation experience since the operation system of this car radio has been upgraded to Android 6.0 version and this car radio is equipped with a powerful 8-core CPU processor.
With the help of the high-precision 3D GPS navigation, you won’t get lost any longer even you have no good sense of directions. Under the guidance of turn-by-turn directions and voice prompts, you can know your current locations and accurately navigate to your destinations. Additionally, you can freely enjoy your favorite music from radio/AV/DVD/TV etc while navigating.
Besides, by linking your Bluetooth-enabled mobile phone with this car radio, you can dial, answer, reject and mute hands-free calls as well as stream music from your phone music playlists, which add a lot of convenience and joyfulness to your driving.
Wish you like this unit and good luck to you!
Recent Comments