new unit after installation,autoradio gps nav bluetooth of 2010 2011 2012 2013 Hyundai Verna
What do you think of removing an original CD player of Hyundai Verna and replace a more advanced one?The whole process may only take about few minutes to professional car stereo removal staffer. If you are willing to remove the unit by yourself, you’d better ask a professional people for help which can make sure what you did is correct.Actually we should pay more attention to how to install 2010 2011 2012 2013 Hyundai Verna gps 2 din dvd player than the old radio removal. You should do as the installation guide showing then connect the wires of the new Toyota Avalon radio stereo correctly. Or, the new unit may not work well in your car.
You can prepare tools for the mount, too, and you may need a screwdriver, a lever and so on.The following are the installation steps for the head unit of 2010 2011 2012 2013 Hyundai Verna. Before you begin the removal please apply the parking brake and remove the negative cable on the vehicle battery to make sure your safety.
1.Pry the lower part of the dashboard with a soft lever
pry the lower part of the panel with a soft lever
2.Remove the dashboard gently and disconnect the cable
remove the dashboard gently
3.Take out four screws with a screwdriver
take out four screws with a screwdriver
4.After that,you can gently take out the CD player and disconnect the cables behind it
gently take out the CD player
disconnect the cables behind it
5.Sort out wiring well,prize the plastic panel away from CD player with a lever
sort out wiring well
prize the plastic panel away from CD player with a lever
6.Remove four screws like the picture show
remove four screws
7.Install the new unit into it and firm the screws
install the new unit into it
firm the screws
8.Connect the cables between the new player and the car and install it carefully
connect the cables between the new player and the car
Before you start up to install Hyundai Verna gps car radio, please read the installation instructions carefully from the dealer if you have it. Please mind to connect the new unit antennas to right positions,this is very important.
In order to ensure that your radio nav system can be used longer,I advice you to mount the car unit according to right steps.It surely will make your usual life more colorful with good mount and maintance.It’s normal that you meet some problems that can’t solve by yourself,at that time you can visit websites for help include the next one: http://www.seicane.com/2-din-dvd-gps-head-unit-mount-for-2010-2011-2012-2013-hyundai-verna-with-3d-navigation-bluetooth-music-tv-tuner-am-fm-radio-dvr-pop-ipod-iphone-hd-1080p-video-backup-camera-aux-c067.
Here are some attentions for your upgrade things:
Your car will probably enter heat protection mode if the gps nav system is operated abnormally,such as operated with very fast speed for a long time,or when temperature is over 70 degrees.Therefore you really need to be careful of it to avoid this normal phenomenon during driving.Wish you good luck!
Recent Comments