Car stereo after installation,gps nav system with bluetooth music of 2011 2012 KIA K2
Maybe you can recognize the unit in above image because you went to shopping in car market and saw it before.You may need to install a new one at that time,but you are not clear which one to choose or don’t know how to install 2011 2012 KIA K2 GPS radio car stereo sound system.
Then don’t worry,for I will try to help you solve this problem.A stereo as the picture show is one specially for 2011 2012 KIA K2,because the trim panel of it is same to factory one’s.And you know that one car can install not only one dvd,and one dvd can also be installed in some cars.
Nowadays most cars have corresponding car stereos that fit each one,and principles of removal and installation are generally same.Whatever whether this unit is suitable for your car,you can also have a patient look at following installation instructions for KIA K2 GPS system that will benefit you a lot.
Here are 2 tips for you before I show you removal steps in order to avoid unnecessary damage or any danger to car or even people.Don’t be afraid,it’s ok in normal cases.
Precautions before installation:
Please make sure that you have finished all parking series and turn off your radio before you start up any work;To ensure security please remember to disconnect the negative battery cable
2011 2012 KIA K2 original radio removal and GPS radio installation:
1.Factory dashboard of KIA K2
Factory dashboard of KIA K2
2.Use a lever to pry upper trim panel,and you can use your hand to pry it after it is fastened
Use a lever to pry upper trim panel
you can use your hand to pry it after it is fastened
3.After all parts are fastened,you can remove it totally
Remove trim panel totally
4.Use a pry tool to lever dashboard around and then remove it by disconnecting cable
Use a pry tool to lever dashboard around
remove it by disconnecting cable
5.Remove four screws that fixed the radio with a screwdriver
Remove four screws that fixed the radio
6.Then you can get out radio easily and disconnect cables at back of it
get out radio
disconnect cables at back of it
7.Make connection between new radio’s cables and car’s
Make connection between new radio’s cables and car’s
8.Release this prat of rubber as the picture show
Release this prat of rubber
9.Get down screws that lay on two sides and use a knife to pry lower place of it
Get down screws that lay on two sides
use a knife to pry lower place of it
10.Put cables in the space after those two steel are taken out
Put cables in the space after those two steel are taken out
11.Connect cables between new dvd and car system,fix screws back to it,then put it well in
Connect cables between new dvd and car system
fix screws back to it
12.Install trim panel back to your car
Install trim panel back to your car
After general read for above 12 specific steps and operate according it,you can turn on your installed dvd player and check whether your installation is all right.
For more specific information,you can visit some related websites,for example: http://www.seicane.com/7-inch-2011-2012-kia-k2-touch-screen-gps-dvd-player-auto-a-v-radio-rds-bluetooth-music-wifi-rearview-camera-aux-dvr-steering-wheel-control-ipod-hd-1080p-c106 . If you meet some tricky problems that you have no experience,you’d better ask a professional man to help you deal with them.
Precautions after installation:
1.Please do not use strong chemicals or detergent wash the machine,if you need to make a tidy,you can use a clean and dried cloth
2.You can use your hand or the touch screen pen to operate new radio, without using other sharp objects, or it will cause damage to screen
3.Please keep well the removed things for usage again during later process
Recent Comments