Before installation, look at the picture of Seicane 2001-2008 Toyota RAV4 Radio after installation.

2001-2008 Toyota RAV4 Radio after installation

2001-2008 Toyota RAV4 Radio after installation

If you have the same dashboard with the picture shows, you can follow the instructions below.

 

Do you want to have a better in-car environment? Thesedays, more and more Toyota RAV4 owners upgrade their factory radio to touch screen DVD player. Aftermarket Toyota RAV4 Radio is a awesome choice for most of us. Here are some professional instructions of Toyota RAV4 Radio installation. But if you didn’t install a radio before, you’d better do it with the help of a professional technician in case of some irreparable damage is being made.

 

Precautions before installation:

1.Before you begin any work, remember to disconnect negative power cable to avoid danger

2.Please turn off your car series include the radio unit and park your car well.

3.Before connecting, please make sure the ignition is off to avoid short circuit and connect the yellow and res cable at last.

 

2001-2008 Toyota RAV4 Radio installation

1)First remove two trim panels at each side of center console and set it aside.

2001-2008 Toyota RAV4 Radio installation step 1

2001-2008 Toyota RAV4 Radio installation step 1

2)Remove the top panel and set it aside.

2001-2008 Toyota RAV4 Radio installation step 2

2001-2008 Toyota RAV4 Radio installation step 2

3)Remove 4 screws holding the unit with a Phillips screwdriver.

2001-2008 Toyota RAV4 Radio installation step 3

2001-2008 Toyota RAV4 Radio installation step 3

4)Gently take out the panel on the radio interface.

2001-2008 Toyota RAV4 Radio installation step 4

2001-2008 Toyota RAV4 Radio installation step 4

5)Then take out the radio and disconnect cables at back of it.

2001-2008 Toyota RAV4 Radio installation step 5

2001-2008 Toyota RAV4 Radio installation step 5

6)Connect the cables on the new head unit as the user manual shows and place them well.

7)Put the new head unit into the dash.

8)Turn on the new head unit and have a comprehensive check if it works well.

9)Install 4 screws back to their original position.

10)Check whether the unit is working without problem.

11)If everything is OK, make trim panel back on your new Seicane radio.

 

By the way, you should make sure whether the aftermarket radio fits your car before installation, and here is a good aftermarket radio of Seicane which fits Toyota RAV4 well:

http://www.seicane.com/seicane-s126002-aftermarket-android-4-4-4-gps-navigation-system-for-2001-2008-toyota-rav4-radio-replacement-with-bluetooth-800-480-touch-screen-3g-wifi-mirror-link-steering-wheel-control-obd2-aux-video-dvr

This Seicane Toyota RAV4 Radio can be a good choice for you. It has intelligent pure android 4.4.4 operation system and 6.2 inch HD 800*480 multi-touch screen.

This in dash car DVD player features a useful and latest GPS system and the advanced bluetooth technology for easy wireless pairing with enabled devices to make or receive hands-free calls and enjoy streaming music. The ability of USB and an SD card slot are also provided for you for more portable devices to let you have an enjoyable experience while driving. The installation is quite easy and it is just plug and play. No wire needs to be modified or cut for the simple installation.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Post Navigation