To be honest, it is not necessary for you to have much professional knowledge if you want to finish the new car stereo installation independently. If you have some related installation experience and a correct installation guide, you can also achieve the whole installation on your own. The following is a Seicane 2001-2008 TOYOTA RAV4 car radio after installation. If you have the same or similar dashboard, you can take the following 2001-2008 TOYOTA RAV4 Touch Screen Radio installation instruction as a reference.
2001-2008 TOYOTA RAV4 Touch Screen Radio after installation
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2001-2008 TOYOTA RAV4 car radio installation instruction
1. Remove two trim panels at each side of the center console and set it aside.
Remove two trim panels at each side of the center console and set it aside
2. Remove the top panel and set it aside.
Remove the top panel and set it aside
3. Remove 4 screws holding the unit with a Phillips screwdriver.
Remove 4 screws holding the unit with a Phillips screwdriver
4. Gently take out the panel on the radio interface.
Gently take out the panel on the radio interface
5. Take out the radio and disconnect cables at back of it.
Take out the radio and disconnect cables at back of it
6. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
7. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
8. Connect the Seicane car radio to your original car radio’s plugs.
9. Put the new Seicane car radio into the dash.
10. Turn on the new Seicane car radio and have a comprehensive check if it works well.
11. Install 4 screws back to their original position.
12. Install the trim panel back to its original place.
That’s all about how to install a 2001-2008 TOYOTA RAV4 car radio. If you have any doubts, you can not only contact your dealer but also turn to a professional for help. Or you can also arrange someone experienced to help you alongside.
Since an ideal car radio matters a lot, it is fairly essential for you to select a suitable car radio. Here I’d like to share a 2001-2008 TOYOTA RAV4 Touch Screen Radio from Seicane with you. For more information, you might check:
Equipped with the stable Android 5.1.1 operation system and a powerful 1.6 GHz Cortex A9 Quad-core processor, this radio can better process its database and information with smoother performance to be the best replacement for your factory radio.
You will get access to numerous advanced features, including high-precision 3D GPS navigation, Bluetooth hands-free calls, Bluetooth streaming music, FM/AM radio, USB port, USB card connection, steering wheel control, etc.
Let’s take Bluetooth technology as an example. With the Bluetooth module built in, you can make your Bluetooth-enabled mobile phone sync with this unit so as to make, receive, reject and mute hands-free calls as well as listen to music streaming from your phone.
If you like this radio, just take it and get it installed in your car right now. Wish you have a great trip from now on!
Recent Comments