If you are a car owner of a 2002 2003 2004 2005 2006 2007 Jeep Liberty car stereo, then you must be quite familiar with the picture below. Yes, it’ a Jeep Liberty car stereo from Seicane after installation. To upgrade your factory radio, it’s your ideal choice for it comes with a wide range of features to meet your different needs. Here I’d like to share a detailed installation guide to help with your installation.

2002 2003 2004 2005 2006 2007 Jeep Liberty car stereo after installation

2002 2003 2004 2005 2006 2007 Jeep Liberty car stereo after installation

 

 

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

 

 

2002 2003 2004 2005 2006 2007 Jeep Liberty car stereo installation guide

1.Remove the trim piece above cup holder with a lever.

1.Remove the trim piece above cup holder with a lever.

1.Remove the trim piece above cup holder with a lever.

 

2.Remove 2 screws behind the trim piece.

2.Remove 2 screws behind the trim piece.

2.Remove 2 screws behind the trim piece.

 

3.Gently pry around the side of trim panel with the lever and then remove the trim panel.

3.Gently pry around the side of trim panel with the lever and then remove the trim panel.

3.Gently pry around the side of trim panel with the lever and then remove the trim panel.

 

4.Remove 4 screws which holds the factory radio in place.

4.Remove 4 screws which holds the factory radio in place.

4.Remove 4 screws which holds the factory radio in place.

 

5.Take out the factory radio.

5.Take out the factory radio.

5.Take out the factory radio.

 

6.Disconnect the smaller harness on the behind of the factory radio.

6.Disconnect the smaller harness on the behind of the factory radio.

6.Disconnect the smaller harness on the behind of the factory radio.

 

7.Connect the cables of the new Seicane car stereo according to the guidance of the user manual.

8.Connect the smaller harness at the back of the new radio.

9.Put the new Seicane car stereo back into the dash.

10.Install four screws and trim panel.

11.Install 2 screws behind the trim piece and the trim piece.

12.Turn on the new radio and have a comprehensive test.

 

That’s all the installation guide for a 2002 2003 2004 2005 2006 2007 Jeep Liberty car stereo. Wish it can be helpful for you. If you can’t understand any step, please don’t hesitate to ask your dealer for help. If you don’t have any experience on the installation, you can have your new stereo installed by a professional. However, if you don’t find a suitable stereo for your car, you can refer to this intelligent 2002 2003 2004 2005 2006 2007 Jeep Liberty car stereo from Seicane, please click for more details:

 

http://www.seicane.com/cheap-2002-2003-2004-2007-jeep-wrangler-liberty-in-dash-radio-gps-sat-nav-stereo-cd-dvd-player-tv-bluetooth-backup-camera-usb-sd-mp3-mp5-ipod-aux-mp3-t6096

 

This amazing Jeep Liberty car stereo is integrated with a great DVD player, so you can listen to your favorite music from the playlist in your mobile phone or Ipod all the way. It also comes with an advanced bluetooth module for you to link with your enabled mobile phone via wireless connection. Besides, you can also get access to hands-free calls to keep you and your passengers safer in the process of the driving. A backup camera can also be supported to make your parking easier. Just go and enjoy yourself all the way with this superior Jeep Liberty car stereo in your car.

 

 

 

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Post Navigation