First of all, I’d like to show you the following picture which is a 2005-2008 Porsche 911 997 gps bluetooth dvd car stereo from Seicane after installation. Are you also desired to have such a remarkable car stereo installed in your beloved Porsche 911 997 of years from 2005 to 2008? If your answer is “yes”, you must be interested in this article, which not only introduces how to install such a car stereo but also how to fix power on and no sound problem.
2005-2008 Porsche 911 997 gps bluetooth dvd car stereo after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.Please prepare a lever and a screwdriver before the removal and the installation.
5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400
2005-2008 Porsche 911 997 car stereo installation steps
1. The original radio before the upgrade.
The original radio before the upgrade
2. Remove the screw on the carpet which is on the side of the radio with a screwdriver, and then the carpet comes out.
Remove the screw on the carpet which is on the side of the radio with a screwdriver, and then the carpet comes out
2-1
3. Remove the other two screws which hold the panel on one side, then slide out the panel. After that, do the same thing on the other side.
Remove the other two screws which hold the panel on one side, then slide out the panel. After that, do the same thing on the other side
3-1
4. Remove two locking screws on each side of the radio with a screwdriver.
Remove two locking screws on each side of the radio with a screwdriver
5. Carefully take the radio out of the dashboard.
Carefully take the radio out of the dashboard
6. Disconnect the connectors at the back of the radio.
7. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
8. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
9. Connect the Seicane car radio to your original car radio’s plugs.
10. Gently put the new Seicane radio back into the dash.
11. Turn on the new Seicane radio and have a comprehensive test if everything works well.
12. After checking the new Seicane radio works well, install four screws holding the radio on both sides, and then install four screws which hold the panels on both sides of the radio. At last, put the carpet back into its original place and install the screw which holds the carpet on the cover.
That’s about the installation steps of a 2005-2008 Porsche 911 997 car stereo from Seicane. Now let’s come to the part of power on and no sound problem.
To power on the unit, please follow the steps below:
1) There are 2 power cables, include cable2 and cable11.
or 
2) Firstly please find out your original car radio’s power cable. Then please connect # 2 power cable’s arrowed plug to your original car radio’s power cable plug , and connect the other end of #2 power cable’s to the unit as below and see whether the unit will power on or not.
3) If the unit is not powered on, then please try #11 power cable to power on the unit.
Note: The Canbus box needs to connect to #2 power cable or #11 power cable’s white plug.
2.After this unit powers on, there will be no sound. Could you please follow the below steps to install the decoder：
1). For the optic fiber decoder, please connect the black wire to your car’s GND wire, yellow wire to your car’s B+ wire, and red wire to your car’s ACC wire.
2). For the white plug and the red plug on the decoder, please simply connect them to our unit’s RCA plug as in the above picture.
3) Please click the arrowed part, and then you will take the circled plug out of the decoder. For your original car’s optical fiber cable, please connect it to the circled plug first, and then plug it back to the optic fiber decoder box.
3. For other parts, please refer to the following diagram.
To purchase such an excellent all-in-one stereo from Seicane for your 2005-2008 Porsche 911 997, you might click:
This Porsche 911 997 gps bluetooth dvd car stereo for year 2005 2006, 2007 and 2008 is ungraded with the top configuration which can meet almost your needs in car. It applies the stable Android 5.1.1 operation system and a powerful RK3188 1.6 GHz Cortex A9 Quad-core processor to enable you to experience faster boot and smoother operation.
With this unit, thanks to its practical and entertainment features, you are able to build a more convenient, comfortable and enjoyable car interior environment as well as have a more wonderful driving experience.
What are you waiting for? If you like this unit, don’t forget to add it to your cart right now!
Recent Comments