If you want to enjoy more convenience and enjoyment in your car, you can simply upgrade your factory radio with a new unit which can support a lot of up-to-date features to meet your different needs in your car. If you don’t know how to install the new unit, then you can read this 2005-2009 Toyota Old REIZ head unit installation guide carefully to help with the installation. The picture below is a wonderful Toyota Old REIZ head unit after installation from Seicane for your reference.
2005-2009 Toyota Old REIZ head unit after installation
Some tips before the installation:
- Please disconnect the power before the installation.
- Please prepare a lever and a screwdriver before the removal and the installation.
- Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
2005-2009 Toyota Old REIZ head unit installation guide
1·Remove the original console panel with a lever, pry gently along the gap and pick up the panel. Then set it aside.
1. Remove the original console panel with a plastic knife
2·Remove the four screws that fixed the radio on the dashboard. Removing these screws will not be a difficult job.
2. Remove the four screws that fixed the radio on the dashboard
3·Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
3. Pull the factory radio out of the dash
4·Unplug the connectors.
4. Unplug the connectors
5·Remove the brackets on both sides of the factory radio. So far the removal of the factory radio is completed. Next steps will move on to the installation of the Seicane unit.
5. Remove the brackets on both sides of the factory radio
6·Install the brackets on both sides of the Seicane unit.
7·Dock the connectors of the original vehicle and the upgraded car audio.
7. Dock the connectors of the original vehicle and the upgraded car stereo
8·Insert the wires to the appropriate location of the upgraded head unit. If you are not sure about how to wire correctly, you may refer to the wiring diagram for details.
9·Fix the Seicane unit with the four screws.
9. Fix the Seicane unit with the four screws
10·Firm the console panel. Finally the new Seicane unit is installed and a comprehensive test should be conducted on the new unit.
10. Firm the console panel
Now you probably have a general idea about how to install your new unit in your car. If you have any questions during the installation, please don’t hesitate to ask your dealer or a professional for help. If it’s the first time for you to upgrade your factory radio, then you’d better ask a professional for help. If you are finding an ideal unit for your car, you can refer to the following 2005-2009 Toyota Old REIZ head unit from Seicane, please click:
With this modern Toyota Old REIZ head unit in your car, you can go anywhere without getting lost with the most accurate GPS navigation system. To simply pair with your enabled mobile phone, you can stay focused on your road ahead and keep your hands on the steering wheel control to make and receive phone calls to keep safer as well as stream music from your phone or other portable devices for fun.
Recent Comments