If you are owners of 2007-2014 Toyota Land Cruiser 200, you need to know removal guide for 2007-2014 Toyota Land Cruiser 200 Radio.Many people invite the professional workers when they install the head unit, but most people do it by themselves. Let’s have a look at the new unit stereo radio of 2007-2014 Toyota Land Cruiser 200 first.
2007-2014 Toyota Land Cruiser 200 Radio
If you are not satisfied with your car’s recent radio, you can take the following advice as references.In fact,all the car DVD players are substantially identical but with minor differences. Therefore knowing how to remove 2007-2014 Toyota Land Cruiser Radio means that you can install car dvd player by yourself.Before discussing the installation, I will give you some advices about safety first.
When we are using the car DVD player, safety is the most important thing.Please do not stare at car DVD while driving, as it can disturb your attention.In addition, do not splash liquid on the unit for getting high playing quality.
The following are the removal steps for car’s head unit.
1.Take out the two blots that distributed on both sides of handbrake
2007-2014 Toyota Land Cruiser 200 Radio installation step 1
2.Remove screws by your hand
2007-2014 Toyota Land Cruiser 200 Radio installation step 2
3.After the bolts are removed,take out the left and right loosed dashboard
2007-2014 Toyota Land Cruiser 200 Radio installation step 3
4.Disconnect the cable between them
2007-2014 Toyota Land Cruiser 200 Radio installation step 4
5.Get out the screw by using your hand
2007-2014 Toyota Land Cruiser 200 Radio installation step 5
6.Remove five screws as the picture show
2007-2014 Toyota Land Cruiser 200 Radio installation step 6
7.Pull off the CD player
2007-2014 Toyota Land Cruiser 200 Radio installation step 7
8.Disconnect the cables between them Gently
2007-2014 Toyota Land Cruiser 200 Radio installation step 8
9.Connect the cables on the new head unit as the user manual shows and place them well.
10.Put the new head unit into the dash.
11.Turn on the new head unit and have a comprehensive check if it works well.
12.Install 4 screws back to their original position.
13.Check whether the unit is working without problem.
14.If everything is OK, make trim panel back on your new Seicane radio.
There are some details to mind during the following steps: you should slide the unit into the dash then connect the negative cable to the original wiring harness.Please remember that the wires should be connected correctly and the same to battery installation.
After your installation of Toyota Land Cruiser 200 Radio turn on the new unit and operate it as the user instruction said.Check out all the functions in the unit and see whether everything works well or not. If it doesn’t, check the wires connections again or contact the technicians from the dealer for help.
Through the detailed description,I hold that you have mainly grasped how to remove original CD player of the car.For more information,please visit:
If you still have any problem on it,ask someone who works in this field for help.You will get a pleasant installation journey and you will find how convinent and perfect when the GPS Navigation System comes in your car.
Recent Comments