As time goes by, you may find that your factory radio is not up-to-date enough to be compatible with a lot of modern features. To change this situation, it is highly suggested that you should remove your factory radio and install a new car radio for your beloved car. The following is a 2015 2016 KIA Sorento car radio installation instruction. If you happen to have the same or similar dashboard and plan to replace your factory radio, you can take this instruction as a reference.
2015 2016 KIA Sorento Car Radio after installation
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2015 2016 KIA Sorento car radio installation instruction
1. The original car radio.
The original car radio
2. Use a plastic removal tool to remove the car radio trim panel.
Use a plastic removal tool to remove the car radio trim panel
3. Remove the four screws that fix the original car radio on the dashboard.
Remove the four screws that fix the original car radio on the dashboard
3-1
4. Gently take out the original car radio.
Gently take out the original car radio
5. Unplug the connectors and cables at the back of the original car radio.
Unplug the connectors and cables at the back of the original car radio
6. Check all the accessories for the new Seicane car radio.
7. Connect the harnesses to the back of the new Seicane car radio.
8. Connect the Seicane car radio to your originalradio’s plugs.
9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane car radio into the dash.
11. Put everything into their original place. All the installation is done.
After reading the above steps, now do you have a general understanding of the installation on a car radio? If you have any problems, you can consult your dealer, turn to someone experienced or a technician for help. Or you can directly ask a technician to help you install the new car radio.
To select a suitable car radio, it is very important to check the compatibility between your new car radio and your car. If you don’t have any ideas, you might check out the following link which is a great 2015 2016 KIA Sorento car radio from Seicane.
With this all-in-one car radio installed in your car, you are able to get access to a wide range of practical and entertainment features, including 3D GPS navigation system, FM/AM radio tuner, Bluetooth hands-free calls, Bluetooth streaming music, AUX, file management, etc.
The high-accuracy 3D GPS navigation system is specially built in to make it easier for you to find the best route to reach any locations you like to go to through turn-by-turn direction and voice prompts. And this unit’s dual zone function enables you to freely listen to beautiful music while navigating.
Through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, you can dial, answer, reject and mute Bluetooth hands-free calls as well as listen to streaming music with remaining your hands on the steering wheel and keeping your eyes on the road ahead. Thanks to Bluetooth function, you can gain a lot of convenience and enjoyment.
Wish you enjoy your driving accompanied by this car radio. Good luck to you!
Recent Comments