If you plan to upgrade your factory radio, it will be a great idea for you to replace it with a new aftermarket car radio. And since the installation of a car radio is not complicated, you can find a correct installation guide to help you. The following is a Dodge Jeep Chrysler Mitsubishi car radio installation guide from Seicane. If you have the same or similar dashboard, you can take this guide as a reference.
Tips about the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
Dodge Jeep Chrysler Mitsubishi car radio installation guide
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2. Remove screws that fixed the radio on the dashboard.
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4. Unplug the connectors at the back of the factory radio.
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
Wish you can learn some skills from the above installation guide. If you have any problems you cannot deal with by yourself, you can consult your dealer, communicate with someone experienced or turn to a professional for help. Or you can arrange a professional technician to help you install the new car radio straightly. To help you select an ideal car radio for your beloved car, here I’d like to share an amazing Dodge Jeep Chrysler Mitsubishi car radio from Seicane with you. For more details, please click:
This car radio, suitable for Dodge Jeep Chrysler Mitsubishi, is loaded with the advanced Android 6.0 operation system and a powerful Quad-core CPU processor to enhance its capability and performance.
Thanks to the worldwide real-time GPS navigation system, you are able to know your current locations and navigate to your desired destinations through turn-by-turn directions and voice prompts.
Besides, through the Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you can freely get access to Bluetooth hands-free calls and streaming music, which can bring you great convenience and enjoyment.
Wish you enjoy your driving experience accompanied by this car radio. Good luck!
Recent Comments