When you drive for a long time, you may easily find it’s easy to get bored or tired in your car. At that case, it’s wise of you to choose a multifunctional head unit which can support a great deal of multimedia playback to relax both yourself and your passengers. Please take a careful look at the picture below, it looks appealing, doesn’t it? This is a Universal head unit from Seicane after installation, if you have the same dashboard, you can refer to the following detailed installation instructions.
Universal head unit after installation
Here are some tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
Universal head unit installation guide
1·Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
Universal head unit installation step 1
2·Remove screws that fixed the radio on the dashboard.
Universal head unit installation step 2
3·Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
Universal head unit installation step 3
4·Unplug the connectors at the back of the factory radio.
Universal head unit installation step 4
- Make antennas and cables connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect whole procedure.
Universal head unit installation step 5
- Put the new Seicane head unit into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7· If everything is OK, firm screws into their original place.
Universal head unit installation step 7
8·Firm the panel on the new Seicane head unit. Finally the new Seicane head unit is installed and a comprehensive test should be conducted on the new radio.
Universal head unit installation step 8
With the above installation guide can be helpful for you. If you have any questions during the whole process, you can seek help from your dealer or a professional. If you find it hard to understand the whole procedure, it’s strongly suggested that you have it installed in a car stereo upgrade center or by a professional.
In addition, you need to make sure you have a fitting head unit for your car. If you have no idea which head unit can fit your car, you can refer to the following Seicane Universal head unit, please click:
This Universal head unit comes with not only a 3D GPS navigation system of high precision to provide you with the most accurate guidance to your destination but also a great deal of entertainment features to make your journey full of fun and enjoyment. Thanks to the Bluetooth technology, you can also keep safe by making and answering phone calls on the steering wheel control as long as you have a mobile phone with Bluetooth.
Take this wonderful Universal head unit as your perfect road companion from now on, an exciting driving experience will always be with you! Good luck to you!
Recent Comments