When you are arriving around an unfamiliar place, an accurate GPS navigation system can help you find the best way to your destination within the least time and guide you there with ease. However, your factory radio may not support GPS function or the function is not powerful enough. In that case, it is wise of you to upgrade your factory radio with a multifunctional car radio with GPS navigation. The following is a step-by-step installation guide from Seicane for a 1997 1998 1999 2000 2001-2004 AUDI A6 S6 RS6 car radio, if you have the same or similar dashboard, you can refer to this guide to help with the installation.
1997 1998 1999 2000 2001-2004 AUDI A6 S6 RS6 Car Radio after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
1997 1998 1999 2000 2001-2004 AUDI A6 S6 RS6 car radio installation guide
1. The original car radio.
The original car radio
2. Insert four release keys in the removal slots of the radio.
Insert four release keys in the removal slots of the radio
3. Pull outwards to release the radio.
Pull outwards to release the radio
4. Disconnect all the connectors at the back of the original radio.
Disconnect all the connectors at the back of the original radio
5. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
6. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
7. Connect the Seicane car radio to your original radio’s plugs.
8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
9. Put the new Seicane car radio into the dash.
10. Put everything into their original place. All the installation is done.
It is not abnormal if you encounter any problems before or during the installation. To solve these problems, you can contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard for you to remove the factory radio and install the new car radio for your beloved car, you can directly go to a car radio upgrade center to arrange a technician to help you install the new car radio. What’s more, if you are still looking for an ideal car radio for your beloved car, you may check out the following link which is a remarkable 1997 1998 1999 2000 2001-2004 AUDI A6 S6 RS6 car radio from Seicane.
This remarkable car radio, which is loaded with the advanced Android 6.0 operation system and a 8-core 1.5 GHz RK-PX5 A53 processor, comes with a wide range of comprehensive features to meet your different needs in car.
With the assistance of the powerful 3D GPS navigation system of high accuracy, you can quickly and easily know your current locations and have the most suitable route option to get to your desired destinations through turn-by-turn directions and voice prompts. Besides, thanks to this unit’s dual zone function, you can also listen to your favorite music which is played behind the scene under GPS mode.
Moreover, as for the entertainment options, you don’t have to worry. With this car radio installed in your car, you can get access to DVD player, Bluetooth streaming music or FM/AM radio to relax both yourself and your passengers in car.
What are you waiting for? If you like this car radio, just add it to your shopping cart, Good luck!
Recent Comments