Are you a owner of Toyota Avalon?And are you familiar with below image?
new unit after installation,gps nav system of 2011 2012 Toyota Avalon
Is it easy to remove an original radio of Toyota Avalon and replace a more advanced one?The whole process may only take about half an hour, but this’s to professional car stereo removal staffs. If you are willing to remove the unit by yourself, you’d better ask a professional people for help to make sure what you did is correct.Actually the question of how to remove 2011 2012 Toyota Avalon aftermarket stereo autoradio should pay more attention to the old radio removal. You should refer to the installation guide from the dealer and then connect the wires of the new Toyota Avalon radio stereo correctly. Or, the new unit cannot work well in your car.
The following are the installation steps for the head unit of 2011 2012 Toyota Avalon. Before you begin the removal please apply the parking brake and remove the negative cable on the vehicle battery to ensure security. You can prepare tools for the mount, too. You may need a screwdriver, a lever and so on.
1.The original CD player
the original CD player
2.Get out the gear shift panel
get out the gear shift panel
3.Remove screws with a screwdriver as the picture show
remove screws with a screwdriver as the picture show
4.Remove the air-conditioner panel with a soft lever
remove the the air-conditioner panel with a soft lever
5.Take out two screws with a screwdriver as the image show
take out two screws with a screwdriver as the image show
6.Remove the original head unit
remove the original head unit
7.The original car radio after removal
the original car radio after removal
After you have finished removing staffs,you can check it whether is the same with this above one.
This is the removal process of 2011 2012 Toyota Avalon autoradio, have you made it clear?
When you start up to remove the original one, please according to the installation instruction from the dealer if you have it. Connect the new unit antennas to right positions. After that, slide the unit into the dash then connect the negative cable to the original wiring harness as the instruction shows. Notice the wires should be connected correctly and the same to battery installment. Turn on the new unit and operate it as the user instruction for users requires. Check out all the functions in the unit and see if everything works well. If it doesn’t, check the wires connections again or contact the technicians from the dealer for help.
This article is about the removal of 2011 2012 Toyota Avalon aftermarket stereo autoradio,it will only show you how to remove your CD player.If you want to know more about installation for it, you can visit some related websites for example:http://www.seicane.com/8-inch-autoradio-dvd-car-audio-system-for-2011-2012-toyota-avalon-with-3d-gps-bluetooth-radio-rds-3g-wifi-tv-tuner-mp3-mp5-ipod-aux-hd-1080p-video-backup-camera-c270,which will teach you installing the dvd player.
Recent Comments