If you are a car owner of a 2002-2006 Dodge Stratus Sedan and are very eager for a high-quality in-car life, then you can think about removing your original car radio and installing a new aftermarket car stereo. This article aims to introduce a detailed installation instruction for a 2002-2006 Dodge Stratus Sedan car stereo. If you are interested in the car stereo installation or plan to install a new car stereo by yourself, you may read this article carefully and wish it can help with your installation in the future.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2002-2006 Dodge Stratus Sedan car stereo installation instruction
1. Remove the trim piece above cup holder with a lever.
2. Remove 2 screws behind the trim piece.
3. Gently pry around the side of trim panel with the lever and then remove the trim panel.
4. Remove 4 screws which hold the factory radio in place.
5. Take out the original radio.
6. Disconnect the smaller harness on the behind of the original car radio.
7. Check all the accessories for the new Seicane car stereo.
8. Connect the harnesses to the back of the new Seicane car stereo.
9. Connect the Seicane car stereo to your original car radio’s plugs.
10. Install four screws and trim panel.
11. Install 2 screws behind the trim piece and the trim piece.
12. Turn on the new stereo and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
Wish the above installation steps can be helpful for you. You needn’t be worried if you encounter any problems since you can contact your dealer, communicate with someone experienced or turn to a professional for help. If you think the installation process is too complicated for you to finish it on your on, then you can straightly go to a car stereo upgrade center to ask a technician to help you install the new car stereo. What’s more, to help you select a suitable car stereo, here I would like to recommend a great 2002-2006 Dodge Stratus Sedan car stereo from Seicane to you. For more information, you may click:
Loaded with the most stable Android 6.0 operation system, 8-core 1.5 GHz RK-PX5 A53 processor and 32 GB INand Flash as well as 2GB RAM, this car stereo can be regarded as one of your best choices to replace your factory radio in a 2002-2006 Dodge Stratus Sedan.
The 3D GPS function is one of the highlights of this car stereo. When you are driving around an unfamiliar place, turn on the high-end 3D GPS function enables you to locate where you are and find the best route to arrive at your desired destinations because of features, including landmark building display, 3D street view, destination search, turn-by-turn voice directions, etc. Besides, thanks to dual zone function, you can freely enjoy your favorite music from radio/AV/DVD/TV etc under GPS mode.
As for optional features, for your parking safety, you can add a backup camera to this unit for automatically switching to the parking image while reversing.
Just add this car stereo to your shopping cart right now and wish you enjoy your in-car life. Good luck to you!
Recent Comments