Nowadays, there is a trend that more and more car owners install a new car radio to get the latest convenience and enjoyment. Do you also want to upgrade your factory radio? If yes, you might as well find a correct installation guide to help you. The following is a 2004 2005 2006 2007 2008-2009 Mazda 3 car radio installation guide. If you have the same dashboard and plan to replace your factory radio with a brand new car radio, you can carefully read this guide for its installation.
2004 2005 2006 2007 2008-2009 Mazda 3 GPS Bluetooth DVD Car Radio after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2004 2005 2006 2007 2008-2009 Mazda 3 car radio installation guide
1. Remove the trim panel with a plastic removal tool.
Remove the trim panel with a plastic removal tool
1-1
2. Remove two screws that fixed the car radio on the dashboard.
Remove two screws that fixed the car radio on the dashboard
3. Take out the original car radio.
Take out the original car radio
4. Unplug connectors at the back of the original car radio.
Unplug connectors at the back of the original car radio
4-1
5. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
6. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
7. Connect the Seicane car radio to your original radio’s plugs.
8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
9. Put the new Seicane car radio into the dash.
10. Put everything into their original place. All the installation is done.
Now do you know how to remove the original car radio and install the new car radio for 2004 2005 2006 2007 2008-2009 Mazda 3? If you encounter any problems, you are welcome to seek advice from your dealer, communicate with someone experienced or turn to a professional for help. But if you are still searching online for an ideal car radio for your beloved car, I’d like to share an amazing 2004 2005 2006 2007 2008-2009 Mazda 3 car radio from Seicane with you. Here comes the link, please click:
This car radio, specially designed for 2004 2005 2006 2007 2008-2009 Mazda 3, which can be regarded as one of the best choices to replace your factory radio. With it installed in your car, you are able to be offered the best services thanks to its more stable Android 6.0 operation system and a quad-core CPU processor.
With the assistance of the high-end 3D GPS navigation system, you can easily know your current locations and navigate to any locations you would like to go to through turn-by-turn directions and voice prompts. And thanks to dual zone function, this car radio enables you to listen to your favorite music while navigating, which won’t have any negative influence on GPS function.
Besides, this car radio comes with a large 7 inch 1024*600 multi-touch screen. With it, you can enjoy the best display effect when you turn on DVD player to watch videos, TV programs, movies, etc as well as have a good view of the GPS map, which is beneficial to your in-car life.
If you like this unit, please don’t hesitate to take it and install it in your car. Wish you all the best!
Recent Comments