What do you think is the best and easiest way to take your in-car life up a notch? In my opinion, one of the most effective and the easiest way is to replace your factory radio with a brand new multifunctional car radio for getting access to a wide range of practical and entertainment features. The following is a 2006 2007 2008 2009 2010-2013 Mitsubishi PAJERO V97/V93 car radio installation instruction from Seicane.If you own the same or similar dashboard and you have a plan to replace your factory radio, you can refer to this instruction carefully.
Precautions for this installation:
1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2. Please make sure that all fastened wires are isolated with electrical tape.
3. Please make sure the ignition is off to avoid short circuit.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006 2007 2008 2009 2010-2013 Mitsubishi PAJERO V97/V93 car radio installation instruction
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2. Remove screws that fixed the radio on the dashboard.
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4. Unplug the connectors at the back of the factory radio.
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
That’s the whole installation process of a 2006 2007 2008 2009 2010-2013 Mitsubishi PAJERO V97/V93 car radio. If you encounter any problems, don’t hesitate to seek help from your dealer, someone experienced or a professional. If you still think the installation process is complicated, you can directly go to a car radio upgrade center and ask a professional technician to help you install the new car radio.
To help you select an ideal car radio for your beloved car, here I would like to share a remarkable 2006 2007 2008 2009 2010-2013 Mitsubishi PAJERO V97/V93 car radio from Seicane with you. For more details, please click:
This amazing car radio is running on the advanced and stable Android 7.1 operation system, a powerful quad-core CPU processor and 2GB RAM to enhance its capabilities and performance which can greatly facilitate the operation.
With the assistance of the worldwide real-time GPS navigation system, you can easily know your current locations and have the best route to get to any locations you would like to go to according to turn-by-turn directions and voice prompts. Additionally, this unit has dual zone function. So you can freely enjoy your favorite music under GPS mode while navigating,and the music can automatically switch to GPS voice.
Moreover, for entertainment, you can utilize this unit’s DVD player function to play music, videos, TV programs, movies, etc to relax both yourself and your passengers.
If you like this unit, just add it to your shopping cart. Good luck!
Recent Comments