When you have a self-driving travel with your families or friends, to keep them entertained all the way, you can easily upgrade your factory radio with a new car radio which can be compatible with almost popular multimedia formats. To help with your new car radio installation, I’d like to share a detailed installation guide on a 2011 2012 VW Volkswagen LAVIDA GPS Navigation Car Stereo with you. If you have the same dashboard, you can start your work following the instruction below.
2011 2012 VW Volkswagen LAVIDA GPS Navigation Car Stereo after installation
Some tips before the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2011 2012 VW Volkswagen LAVIDA car stereo installation instruction
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2. Remove screws that fixed the radio on the dashboard.
Remove screws that fixed the radio on the dashboard
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4. Unplug the connectors at the back of the factory radio.
Unplug the connectors at the back of the factory radio
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
If everything is OK, firm screws into their original place
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.
Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
Wish the above installation instruction can be helpful for you. If there is something wrong with your installation, you can seek help from your dealer or a professional. However, before the installation, it is very essential for you to check whether your new car radio can fit well with your beloved car or not. If your new car radio is not suitable enough, I’d like to recommend you to click the link below for a 2011 2012 VW Volkswagen LAVIDA GPS Navigation Car Stereo from Seicane.
With dedicated interface as well as high performance, this Seicane car stereo for a 2011 2012 VW Volkswagen LAVIDA can be a good replacement of your outdated factory radio. Thanks to its additional entertainment function, you won’t get bored in car when you turn on this multimedia receiver to play DVDs, CDs, FM/AM radio. Besides, when traveling in an unfamiliar place, you won’t get lost any time and any where when you press the “GPS” button and take advantage of it. Wish you enjoy your journey with your families or friends along with this wonderful 2011 2012 VW Volkswagen LAVIDA gps nav car stereo!
Recent Comments