There is no denying that it will be very exciting to travel in your own car with your families or friends, isn’t it? To help you gain a more relaxing driving experience, it is suggested that you should upgrade your factory radio with a new aftermarket car radio which can support a lot of comprehensive features. And you can read the following 2005 2006 2007 2008 2009 Nissan Teana car radio installation guide from Seicane and take it as a reference if you own the same dashboard.
2005 2006 2007 2008 2009 Nissan Teana after installion
Tips about the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2005 2006 2007 2008 2009 Nissan Teana car radio installation guide
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2. Remove screws that fixed the radio on the dashboard.
Remove screws that fixed the radio on the dashboard
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4. Unplug the connectors at the back of the factory radio.
Unplug the connectors at the back of the factory radio
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
If everything is OK, firm screws into their original place
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.
Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
That’s all about how to remove and install a 2005 2006 2007 2008 2009 Nissan Teana car radio. If you have any problems, you can consult your dealer, communicate with someone experienced or turn to a professional for help. To help you select an ideal car radio, I would like to share a remarkable 2005 2006 2007 2008 2009 Nissan Teana car radio from Seicane with you. For more details, please click:
This up-to-date aftermarket car radio is an ideal replacement for you to upgrade your factory radio so that you can enjoy this car radio’s better capabilities. With the built-in GPS navigation system of high-accuracy, you are able to know your current locations and navigate to your desired destinations through turn-by-turn directions and voice prompts. And through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you can get access to Bluetooth hands-free calls and Bluetooth streaming music.
Wish you like this unit and good luck to you!
Recent Comments