To upgrade your car, it is a wise choice for you to upgrade your factory radio with an aftermarket multifunctional radio. A new radio can improve your interior environment with its attractive appearance and can provide you with a brand new driving experience with its remarkable features. With a detailed installation guide, you can even install a new radio by yourself. Here shows you an image of a Seicane1999-2004 Jeep Grand Cherokee radio after installation, if you have the same dashboard, you can take the following installation guide as a reference.
1999-2004 Jeep Grand Cherokee radio after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.Please prepare a lever and a screwdriver before the removal and the installation.
5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400
1999-2004 Jeep Grand Cherokee radio installation guide
1. Remove the trim piece above cup holder with a lever.
Remove the trim piece above cup holder with a lever
2. Remove 2 screws behind the trim piece.
Remove 2 screws behind the trim piece
3. Gently pry around the side of trim panel with the lever and then remove the trim panel.
Gently pry around the side of trim panel with the lever and then remove the trim panel
4. Remove 4 screws which holds the factory radio in place.
Remove 4 screws which holds the factory radio in place
5. Take out the factory radio.
Take out the factory radio
6. Disconnect the smaller harness on the behind of the factory radio.
Disconnect the smaller harness on the behind of the factory radio
7. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
8. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
9. Connect the Seicane car radio to your original car radio’s plugs.
10. Install four screws and trim panel.
11. Install 2 screws behind the trim piece and the trim piece.
12. Turn on the new radio and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
Wish the above installation guide can be helpful for your upgrading. If there are any questions, we suggest you turn to your dealer or a professional for help. If you don’t have a suitable car radio for your beloved car, I’d like to recommend an intelligent 1999-2004 Jeep Grand Cherokee radio from Seicane to you.
This unit is equipped with the intelligent Android 5.1.1 version operation system, a powerful RK3188 1.6 GHz Cortex A9 Quad-core processor, 16GB flash, and 1GB RAM. So you are able to utilize the latest hardware and software for car radios.
Thanks to the built-in GPS navigation, you can easily locate and navigate to any places you would like to go to through the turn-by-turn direction and voice prompts. Additionally, hands-free calls and streaming music are both available for you as long as you wirelessly connect this unit with your Bluetooth-enabled devices through the advanced Bluetooth technology.
Just take this wonderful 1999-2004 Jeep Grand Cherokee radio on all your trips, and you will embrace an exciting and brand new driving experience from now on!
Recent Comments